Moffat E20M Installation Manual
2
20M
E20M Series
(Manual Operation)
SERIES
Installation and Operation Manual
234090-1
MANUFACTURED BY
Moffat Limited
Christchurch
New Zealand
INTERNATIONAL CONTACTS
AUSTRALIA
Moffat Pty Limited
E.Mail: vsales@moffat.com.au
Main Office: (tel) (03) 9518 3888
(fax) (03 9518 3833
Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281
CANADA
Serve Canada
Web: www.servecanada.com
E.Mail: info@servecanada.com
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)
NEW ZEALAND
Moffat Limited
Web: www.moffat.co.nz
E.Mail: sales@moffat.co.nz
Main Office: (tel): 0800 663328
UNITED KINGDOM
Blue Seal
Web: www.blue-seal.co.uk
E.Mail: sales@blue-seal.co.uk
Sales: (tel): 0121 327 5575
(fax): 0121 327 9711
Spares: (tel): 0121 322 6640
(fax): 0121 327 9201
Service: (tel): 0121 322 6644
(fax): 0121 327 6257
UNITED STATES
Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)
(tel): 336 661 1556
(fax): 336 661 9546
Service: (tel): 800 858 4477 (Toll Free)
(tel): 366 661 1556
(fax): 336 661 1660
REST OF WORLD
Moffat Limited
Web: www.moffat.co.nz
E.Mail: export@moffat.co.nz
The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in writing
by the manufacturer.
In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and design
without prior notice.
© Copyright Moffat Ltd. June 2010.
Contents List
E20M Series Turbofan Convection Ovens.
Model Numbers Covered in this Manual
E22M3 - Turbofan Oven - 3 Tray Convection Oven.
E23M3 - Turbofan Oven - 3 Tray Convection Oven.
E27M2 - Turbofan Oven - 2 Tray Convection Oven.
E27M3 - Turbofan Oven - 3 Tray Convection Oven.
E28M4 - Turbofan Oven - 4 Tray Convection Oven.
Introduction ........................................................................................................... 2
Safety Information
Specifications......................................................................................................... 3
Installation............................................................................................................. 4
Installation Requirements
Unpacking
Location
Clearances
Stand Mounted Ovens
Electrical Connection
Positioning and Levelling of Oven
Initial Start-Up
Operation ............................................................................................................... 6
Operation Guide
Oven Control Panel
Description of Controls
Using the Oven
Cleaning ................................................................................................................. 7
Cleaning Guidelines
Oven Cleaning
Fault Finding ........................................................................................................ 10
Electrical Schematics ........................................................................................... 11
Replacement Parts List ........................................................................................ 13
Introduction
Before using your new oven, please read this instruction
manual carefully, pay particular attention to any information
labelled ‘WARNING’, ‘CAUTION’, ‘IMPORTANT’ or
‘NOTE’ in this manual.
Indicates a hazardous situation
Warning
which, if not avoided, will result in
death or serious injury.
Caution
Indicates a hazardous situation
which, if not avoided, will result in
minor or moderate injury.
If you are unsure of any aspect of the installation,
instructions or performance of your oven, contact your
TURBOFAN dealer promptly. In many cases a phone call
could answer your question.
Should you contact your TURBOFAN dealer on any matter
concerning this oven, please have the information provided
opposite, readily available.
This manual must be kept by the owner for future
reference.
A record of the
and
Serial Number of the oven
Date of Purchase, Date of Installation
should be recorded in
the area provided below.
The serial number of this oven can be found on the
Technical Data Plate located on the front right hand
side panel, see diagram in ‘Installation Section’.
Model Number:
Serial Number:
Dealer:
Service Provider:
Date Purchased:
Date Installed:
Safety Information
For your safety, please pay attention to the following symbols
marked on the appliance.
- Risk of electric shock.
No user serviceable parts inside.
Qualified service person access only.
Disconnect from power before servicing.
2
E22M3
E23M3
E27M2 / E27M3
E28M4
Specifications
E22M3
E23M3
E27M2
E27M3
E28M4
Oven Power Ratings
110-120V, 1P+N+E, 60HZ, 1.5 kW
220-240V, 1P+N+E, 50/60HZ, 2.0 kW
208V, 1P+N+E, 50-60 HZ, 2.7 kW
220V, 1P+N+E, 50-60 HZ, 3.0 kW
230-240V, 1P+N+E, 50-60 HZ, 3.0 kW
208V, 1P+N+E, 50-60HZ, 2.7kW
220V, 1P+N+E, 50-60HZ, 3.0kW
230-240V, 1P+N+E, 50-60HZ, 3.0kW
208V, 1P+N+E, 50-60HZ, 4.2kW
220V, 1P+N+E, 50-60HZ, 4.7kW
230-240V, 1P+N+E, 50-60HZ, 4.7kW
208V, 1P+N+E, 50-60HZ, 5.4kW
220V, 1P+N+E, 50-60HZ, 6.0kW
230-240V, 1P+N+E, 50-60HZ, 6.0kW
E22M3
E23M3
E27M2
E27M3
E28M4
Oven Tray Details
Tray Capacity Tray Spacing
3 x EN 2/3 Tray
3 x US ½ Pan
3 x EN 2/3 Tray
3 x US ½ Pan
3 x EN 600 x 400 mm Tray
3 x US Full Pan
3 x EN 600 x 400 mm Tray
3 x US Full Pan
4 x EN 600 x 400 mm Tray
4 x US Full Pan
70 mm / 2
85 mm / 3 1/3”
85 mm / 3
85 mm / 3 1/3”
76 mm / 3 ”
3
1
/4”
/3”
3
Installation Requirements
Installation
Important:
• Installation shall comply with local electrical, health and safety requirements.
• It is most important that this oven is installed correctly and that oven operation is correct before use.
• If you have any questions regarding the proper installation and / or operation of this oven, please contact your local
Turbofan distributor.
Unpacking
Electrical Power
Rating
Technical Data Plate - Data and Location
Clearances
Current Draw
MOFFAT LIMITED
CHRISTCHURCH ( NEW ZEALAND )
A @ V a.c.
12.0 115
1P+N+E
THIS APPLIANCE SHALL BE INSTA LLED IN ACCORDANCE WITH CURRENT
REGULATIONS AND USED ONLY I N A WELL-VENTILATED SPACE. REFER TO THE
INSTRUCTIONS BEFORE INSTALLING AND USING THIS APPLIANCE.
Oven
Serial Number
Model Number
MODEL
E22M3
USE22M3
CODE
SERIAL
xxxxxx
LOT yywwxxx
*******
V a.c. Hz kW
110-120 50-60 1.5
THIS APPLIANCE MUST BE EARTHED / GROUNDED
(example only)
Oven
1. Remove all packaging and transit protection including
all protective plastic coating from the exterior stainless
steel panels.
2. Check the oven and supplied parts for damage. Report
any damage immediately to the carrier and distributor.
3. Check that the following parts have been supplied with
your oven:-
4 x Leg Adjustable.
4. Report any deficiencies to the distributor who supplied
your oven.
5. Securely fit the 4 legs supplied with the oven.
6. Check that the available electrical supply is correct to
that shown on the Technical Data Plate located on the
front right hand side panel.
• Refer to ‘Specifications’ section, ‘Oven
Specifications Tables’.
Location
1. Position the oven in its approximate working position.
2. The unit should be positioned so that the control panel
and oven shelves are easily reachable for loading and
unloading.
To ensure correct ventilation for the motor and controls,
the following minimum installation clearances are to be
adhered to:-
Top 100 mm / 4”.
Rear 25 mm / 1”.
Left-hand side 25 mm / 1”.
Right-hand side 25 mm / 1”.
Important:
The vent located at the top (E22 Ovens) or rear (Other 20
Series Ovens) of the oven must NOT be obstructed.
Oven Vent Location
E22 Ovens
Oven Vent Location
E23, E27, E28 Ovens
Stand Mounted Oven
For ovens that are to be mounted to a stand, the oven feet
are used to level the oven on the stand. Refer to the
instructions supplied with separately ordered stands for
mounting details.
4
Loading...