Mobile Communications BMU650 User Manual

Mobile Z6 4G LTE

Wireless Booster High Power

6 BAND

MULTI BAND

50dB

User Manual

Cellular
Signal Booster

RX/TX

50dB

6 BAND

MULTI BAND 50dB

USA

Wireless Booster High Power

2G, 3G, 3G+, 4G, 4G+

GSM,HSPA,CDMA,LTE, LTE A

Band 12,17
Band 13
Band 5
Band 4

Band 2,25

In 2001 SmoothTalker produced the rst digital mobile cellular signal booster
in North America with FCC and ICAN approval. We continue to lead with the
most powerful and intelligent boosters in the world.
Our dynamic adaptive proprietary algorithms make them very network friendly.
We call it STEALTH TECH technology.

700MHz Lower
700MHz Upper
850MHz
1700/2100MHz
1900MHz ext

stealth

tech

®

Boosts the outside signal into your vehicle

and the cell phone signal back to the tower.

Smoothtalker.com

Contents

Inside

antenna

Cellular Booster

outside antenna

Optional Power Types

12 volt install

fused type

All parts shown are not included in all kits.
Please check your model number for more details at smoothtalker.com

12 volt socket
CLA plug type

120 volt AC/DC

NOTE: It is normal for the booster to be quite warm while the phone is in use state.

To comply with FCC rules, this booster must only be operated with cables, antennas

and coupling devices that have been approved for use with this equipment.

1

Installation

Installation

1) Connect the outside antenna to the side of the booster
marked as “outside antenna”
Connect the inside antenna to the side of the booster
marked as “inside antenna”

2) Placement
Place the outside antenna in the middle of the vehicle roof. If the vehicle has a
sunroof please place the antenna on the roof towards the back window.
Place the Patch (inside) antenna in desired location. For cars and trucks
the console between the front seats is recommended.
Connect the booster as shown in Fig.1 below.

Important: Use only the power supply included with the booster. Connecting any
other power supply at any time will result in damage to the booster and will void
the warranty. Do not turn on the power switch until ALL cables have been
screwed or plugged into the booster or you can cause damage to the booster.

Applications

Mobile Wireless with 12 volt

socket CLA plug-in type

Fig. 1

2