Mitsubishi SRC208HENF-L, SRK288HENF-L, SRC328HENF-L2, SRK408HENF-L3, SRC408HENF-L3 User Manual

...

Линейка кондиционеров Mitsubishi Heavy на

сезон 2002 года.

1. Настенные бытовые сплит-системы.

WALL MOUNTED TYPE ROOM AIR CONDITIONER

тепло/холод только охлаждение инвертор

SRK 208 HENF-L SRK 208 СENF-L SRK 258 СENF-L SRK 288 HENF-L SRK 288 СENF-L SRK 25 GZ-L1 SRK 328 HENF-L2 SRK 328 СENF-L SRK 408 HENF-L3 SRK 408 СENF-L SRK 35 GZ-L1 SRK 50 HA SRK 50 СA SRK 56 HA SRK 56 СA SRK 502 Z-L

поддерживаются в наличии на складе в Москве в течении всего 2002 года.

SRK 501 HENF-L, SRK 561 HENF-L SRK 501 СENF-L, SRK 561 СENF-L

поставлялись в 2001 году. Сняты с производства, поставки в 2002 году не планируются.

Указанные модели поставляются на фреоне R22. Возможна поставка на фреоне R407.

Информацию по моделям на R407, а также старым моделям Вы можете получить в компании Бьюфорт по тел. (095) 755-84-33.

1-2

CONTENTS

1.1GENERAL INFORMATION........................................................................53

1.1.1Specific features.................................................................................53

1.1.2How to read the model name.............................................................53

1.2SELECTION DATA.....................................................................................54

1.2.1Specifications......................................................................................54

1.2.2Range of usage & limitations.............................................................58

1.2.3Exterior dimensions............................................................................59

1.2.4Piping system......................................................................................61

1.3ELECTRICAL DATA..................................................................................63

1.3.1Electrical wiring..................................................................................63

1.4OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER.............65

1.4.1Table of operation control..................................................................65

1.4.2Details of operation control...............................................................66

1.5APPLICATION DATA.................................................................................77

1.5.1Selection of location for installation.................................................78

1.5.2Installation of indoor unit...................................................................79

1.5.3Installation of outdoor unit.................................................................81

1.5.4Refrigerant piping...............................................................................82

1.5.5Test run................................................................................................83

1.5.6Precautions for wireless remote controller installation

and operation ......................................................................................84

1.6MAINTENANCE DATA...............................................................................85

1.6.1Trouble shooting.................................................................................85

1.6.2Servicing..............................................................................................89

1.6.3Power supply remote operation........................................................90

1-3

1.1 GENERAL INFORMATION

1.1.1 Specific features

The “Mitsubishi Daiya” room air conditioner: SRK series are of split and wall mounted type and the unit consists of indoor unit and outdoor unit with refrigerant precharged in factory. The indoor unit is composed of room air cooling or heating equipment with operation control switch and the outdoor unit is composed of condensing unit with compressor.

(1) Remote control flap

The flap can be automatically controlled by operating wireless remote control.

¡ AUTO (Natural flow) : Flap operation is automatically control. ¡ Swing : This will swing the flap up and down. ¡ Memory flap : Once the flap position is set, the unit memorizes the position and continues to

operate at the same position from the next time.

(2) Automatic Operation

When the remote control switch is set on “auto”, it will either automatically decide operation mode such as cooling, heating and thermal dry, or operate in the operation mode before it has been turned to automatic control.

(3) Self diagnosis Function

We are constantly trying to do better service to our customers by installing such judges that show abnormality of operation as follows.

1.1.2 How to read the model name

Example : SR K 32 8 H EN F - L

CE marking model Flare connecting Applicable power source …… See the specifications H-Heat pump type C-Cool only type Series No. Product capacity Wall mounted type room air conditioner Split type room air conditioner

Abnormality of room temperature sensor.

TIMER lamp is light up.

RUN lamp is flashing. (1 Times/ 8sec.)

RUN lamp is flashing. (2 Times/ 8sec.)

Abnormality of heat exchanger sensor.

Abnormality of indoor fan motor.

RUN lamp is flashing. (6 Times/ 8sec.)

Abnormality of outdoor unit.

RUN lamp is light up.

TIMER lamp is flashing. (5 Times/ 8sec.)

No lamps will flashing when the unit is operating.

}

1-4

1.2 SELECTION DATA

1.2.1 Specifications

Model SRK208HENF-L (Indoor unit)

SRC208HENF-L (Outdoor unit)

Item

Model

SRK208HENF-L SRC208HENF-L

Cooling capacity

(1)

W 1800/1850

Heating capacity

(1)

W 2000/2050

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 0.690/0.775 Running current (Cooling) A 3.4/3.6 Heating input kW 0.620/0.735 Running current (Heating) A 3.0/3.4 Inrush current A 17.3/18.9 COP (In cooling) 2.61/2.39 Noise level

(5)

dB(A) Cooling: 36/37 Heating: 38/39 Cooling: 46/47 Heating: 47/48

Exterior dimensions

Height x Width x Depth

mm 275 x 790 x 174 492 x 750 x 220

Color Ivory white Polar white Net weight kg 7.5 27 Refrigerant equipment

Compressor type & Q’ty

– RM5485GNE2 (Rotary type) x 1

Motor kW – 0.65

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.62 Refrigerant oil R 0.35 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 16 17

Air flow (at High) (Cooling) 7.0/7.0 21/22

(Heating)

CMM

7.5/7.5 21/22

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow) – Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø9.52 (3/8") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

Gas line: 0.35m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (Including earth cable)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1 Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(2) The operation data are applied to the 220V or 240V districts respectively (3) Limitation of Voltage application Minimum: 198V Maximum: 264V (4) The refrigerant quantity to be charged includes the refrigerant in 7.5m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, (when it is less than 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.)

(5) Expressed in sound pressure level.

Operation data

(1)

Refrigerant

piping

1-5

Model SRK288HENF-L (Indoor unit)

SRC288HENF-L (Outdoor unit)

Item

Model

SRK288HENF-L SRC288HENF-L

Cooling capacity

(1)

W 2500/2500

Heating capacity

(1)

W 2900/3000

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 0.930/1.005

Running current (Cooling) A 4.5/4.6

Heating input kW 0.83/0.91

Running current (Heating) A 4.0/4.1

Inrush current A 18.2/19.6

COP (In cooling) 2.69/2.49

Noise level

(5)

dB(A) Cooling:38/39 Heating:38/41 Cooling:41/42 Heating:42/43

Exterior dimensions

Height x Width x Depth

mm 275 x 790 x 174 542 x 795 x 255

Color Off white Polar white Net weight kg 7.5 33 Refrigerant equipment

Compressor type & Q’ty

– RM5512GNE1 (Rotary type) x 1

Motor kW – 0.9

Starting method – Line starting Heat exchanger Louver fins & inner grooved tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.88 Refrigerant oil R 0.35 (SUNISO Z300HDS) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 16 11

Air flow (at High) (Cooling) 7.5/7.5 23

(Heating)

CMM

8.0/8.0 23

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow) – Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø9.52 (3/8") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

Gas line: 0.35m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (Including earth cable)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1 Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(Purging is not required even in the short piping.) If the piping length is longer, (when it is less 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.)

(5) Expressed in sound pressure level.

Operation data

(1)

Refrigerant

piping

1-6

Model SRK328HENF-L2 (Indoor unit)

SRC328HENF-L2 (Outdoor unit)

Item

Model

SRK328HENF–L2 SRC328HENF–L2

Cooling capacity

(1)

W 3000/3000

Heating capacity

(1)

W 3800/3800

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 1.39/1.49

Running current (Cooling) A 6.9/6.9

Heating input kW 1.19/1.32

Running current (Heating) A 6.1/6.1

Inrush current A 33.6/36.6

COP (In cooling) 2.16/2.01

Noise level

(5)

dB(A) Cooling: 40/42 Heating: 41/43 Cooling: 44/46 Heating: 45/47

Exterior dimensions

Height x Width x Depth

mm 275 x 790 x 174 542 x 795 x 255

Color Ivory white Polar white Net weight kg 8 37 Refrigerant equipment

Compressor type & Q’ty

– RM5517GNE2 (Rotary type) x 1

Motor kW – 1.3

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.74 Refrigerant oil R 0.6 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 16 15

Air flow (at High) (Cooling) 8.5/8.5 24/24.5

(Heating)

CMM

9.5/9.5 24/24.5

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow) – Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

Gas line : 0.35m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (Including earth cable)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1 Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(2) The operation data are applied to the 220V or 240V districts respectively (3) Limitation of Voltage application

Minimum: 198V Maximum: 264V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, when it is 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.

(5) Expressed in sound pressure level.

Operation data

(1)

Refrigerant

piping

1-7

Model SRK408HENF-L3 (Indoor unit)

SRC408HENF-L3 (Outdoor unit)

Item

Model

SRK408HENF-L3 SRC408HENF-L3

Cooling capacity

(1)

W 3500/3500

Heating capacity

(1)

W 4100/4100 Power source 1 Phase, 220/240V, 50Hz Cooling input kW 1.320/1.405 Running current (Cooling) A 6.4/6.4 Heating input kW 1.335/1.460 Running current (Heating) A 6.5/6.5 Inrush current A 33.6/36.6 COP (In cooling) 2.65/2.49

Cooling

Sound level Hi : 40/42 Lo : 31/32 47/49

Noise level

Power level

Hi : 54/56 Lo : 45/46 61/63

Heating

Sound level Hi : 41/43 Lo : 39/40 48/50

Power level Hi : 55/57 Lo : 53/54 62/64

Exterior dimensions

Height x Width x Depth

mm 275 x 790 x 174 542 x 795 x 255

Color Ivory white Polar white Net weight kg 8 37 Refrigerant equipment

Compressor type & Q’ty

– RM5516GNVE4 (Rotary type) x 1

Motor kW – 1.3

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.3 Refrigerant oil R 0.6 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 16 18

Air flow (at High) (Cooling) 8.5/8.5 22/22.5

(Heating)

CMM

9.5/9.5 22/22.5

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow) – Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m Gas line : 0.35m –

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (Including earth cable)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612 Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220V or 240V districts respectively (3) The refrigerant quantity to be charged includes the refrigerant in 7.5m connecting piping. (Purging is not required even in the short piping.)

If the piping length is longer, when it is 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.

(4) When the unit is operated in cooling or dehumidification mode at the outside air temperature of 1ºC and less, there is a possibility that water leakage

occurs at the indoor unit.

Operation data

(1)

Refrigerant

piping

1-8

Item

Model

SRK501HENF–L SRC501HENF–L

Cooling capacity

(1)

W 4500/4500

Heating capacity

(1)

W 5700/5800

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 1.78/1.88

Running current (Cooling) A 8.4/8.2

Heating input kW 1.76/1.89

Running current (Heating) A 8.5/8.3

Inrush current A 39/42

COP (In cooling) 2.53/2.39

Noise level

(5)

dB(A) Cooling: 44/44 Heating: 45/45 Cooling: 50/51 Heating: 53/54

Exterior dimensions

Height x Width x Depth

mm 275‚790‚189 615‚850‚290 + 30

Color Ivory white Polar white Net weight kg 9 53 Refrigerant equipment

Compressor type & Q’ty

– RM5523GNE4 (Rotary type) x 1

Motor kW – 1.7

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.28 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 23 40

Air flow (at High) (Cooling) 11/11 34/34

(Heating)

CMM

12/12 34/34

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

Gas line: 0.35m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (With Earth)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1 Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(Purging is not required even in the short piping.) If the piping length is longer, (when it is 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.)

(5) Expressed in sound pressure level.

Operation data

(1)

Refrigerant

piping

Model SRK501HENF-L (Indoor unit)

SRC501HENF-L (Outdoor unit)

1-9

Model SRK561HENF-L (Indoor unit)

SRC561HENF-L (Outdoor unit)

Item

Model

SRK561HENF–L SRC561HENF–L

Cooling capacity

(1)

W 5000/5000

Heating capacity

(1)

W 6200/6300

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 2.08/2.18

Running current (Cooling) A 10.2/9.53

Heating input kW 2.02/2.15

Running current (Heating) A 10.5/9.95

Inrush current A 44/48

COP (In cooling) 2.40/2.29

Noise level

(5)

dB(A) Cooling: 45/45 Heating: 46/46 Cooling: 53/54 Heating: 54/56

Exterior dimensions

Height x Width x Depth

mm 275‚790‚189 615‚850‚290 + 30

Color Ivory white Polar white Net weight kg 9 53 Refrigerant equipment

Compressor type & Q’ty

– RM5526GNE4 (Rotary type) x 1

Motor kW – 1.9

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.35 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 23 40

Air flow (at High) (Cooling) 12/12 34/34

(Heating)

CMM

13/13 34/34

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment – Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

Gas line: 0.35m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (With Earth)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1 Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(Purging is not required even in the short piping.) If the piping length is longer, (when it is 10 m, add 20g refrigerant per meter and when it is 10 to 15m, add 30g refrigerant per meter.)

(5) Expressed in sound pressure level.

Operation data

(1)

Refrigerant

piping

1-10

Model SRK50A (Indoor unit)

SRC50HA (Outdoor unit)

Item

Model

SRK50A SRC50HA

Cooling capacity

(1)

W 4500

Heating capacity

(1)

W 5700 Power source 1 Phase, 220/230/240V, 50Hz Cooling input kW 1.79 Running current (Cooling) A 8.4/8.0/7.7 Heating input kW 1.83 Running current (Heating) A 8.5/8.1/7.9 Inrush current A 39/41/42 COP (In cooling) 2.51

Cooling

Sound level Hi : 44 Lo : 37 51

Noise level

Power level

Hi : 58 Lo : 51 65

Heating

Sound level Hi : 45 Lo : 38 53

Power level Hi : 59 Lo : 52 67

Exterior dimensions

Height x Width x Depth

mm 298‚798‚203 640‚850‚290

Color Stucco white Stucco white Net weight kg 10 45 Refrigerant equipment

Compressor type & Q’ty

– RM5523GNE4 (Rotary type) x 1

Motor kW – 1.7

Starting method – Line starting Heat exchanger Louver fins & grooved tubing Refrigerant control Capillary tubes

Refrigerant

(3)

kg R22 1.45 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 23 35

Air flow (at High) (Cooling) 11 39

(Heating)

CMM

13 39

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.5m Gas line: 0.43m –

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 3m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (With Earth)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612 Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220V, 230V or 240V districts respectively (3) The refrigerant quantity to be charged includes the refrigerant in 7 m connecting piping. (Purging is not required even in the short piping.)

If the piping length is longer. (When it is 7 to 15 m, add 20 g refrigerant per meter.)

(4) When the unit is operated in cooling or dehumidification mode at the outside air temperature of 1ºC and less, there is a possibility that water leakage

occurs at the indoor unit.

Operation data

(1)

Refrigerant

piping

1-11

Model SRK56A (Indoor unit)

SRC56HA (Outdoor unit)

Item

Model

SRK56A SRC56HA

Cooling capacity

(1)

W 5000

Heating capacity

(1)

W 6200 Power source 1 Phase, 220/230/240V, 50Hz Cooling input kW 2.08 Running current (Cooling) A 9.7/9.3/8.9 Heating input kW 2.10 Running current (Heating) A 9.8/9.4/9.0 Inrush current A 44/46/48 COP (In cooling) 2.40

Cooling

Sound level Hi : 45 Lo : 38 51

Noise level

Power level

Hi : 59 Lo : 52 65

Heating

Sound level Hi : 45 Lo : 38 53

Power level Hi : 59 Lo : 52 67

Exterior dimensions

Height x Width x Depth

mm 298‚798‚203 640‚850‚290

Color Stucco white Stucco white Net weight kg 10 45 Refrigerant equipment

Compressor type & Q’ty

– RM5526GNE4 (Rotary type) x 1

Motor kW – 1.9

Starting method – Line starting Heat exchanger Louver fins & grooved tubing Refrigerant control Capillary tubes

Refrigerant

(3)

kg R22 1.45 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Defrost control MC control Air handling equipment

Fan type & Q’ty

Tangential fan x 1 Propeller fan x 1

Motor W 23 35

Air flow (at High) (Cooling) 11 39

(Heating)

CMM

13 39

Air filter, Q’ty Polypropylene net (washable) x 2 – Shock & vibration absorber – Cushion rubber (for compressor) Operation control

Operation switch

Wireless–Remote controller –

Room temperature control MC. Thermostat –

Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment – Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm(in) Liquid line: ø6.35 (1/4") Gas line: ø12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.5m Gas line: 0.43m –

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 3m (3 cores with Earth) Connection Size x Core number 1.5mm2 x 5 cores (With Earth)

wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612 Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

If the piping length is longer. (When it is 7 to 15 m, add 20 g refrigerant per meter.)

(4) When the unit is operated in cooling or dehumidification mode at the outside air temperature of 1ºC and less, there is a possibility that water leakage

occurs at the indoor unit.

Operation data

(1)

Refrigerant

piping

1-12

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, (when it is less than 10 m, add 10 g refrigerant per meter and when it is 10 to 15 m, add 30 g refrigerant per meter.)

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK208CENF-L (Indoor unit)

SRC208CENF-L (Outdoor unit)

Item

Model

SRK208CENF-L SRC208CENF-L

Cooling capacity

(1)

W 1800/1850

Power source 1 Phase, 220/240 V, 50 Hz

Cooling input kW 0.54/0.58 Running current (Cooling) A 2.5/2.6 Inrush current A 11.7/12.8 COP (In cooling) 3.33/3.19 Noise level

(5)

dB (A) 36/37 44/45

Exterior dimensions mm

275 × 790 × 174 492 × 750 × 220

Height × Width × Depth

Color Ivory white Polar white Net weight kg 7.5 24 Refrigerant equipment

– RM5470GNE5 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 0.55

Starting method – Line starting Heat exchanger Louver fins & tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.57 Refrigerant oil R 0.3 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 16 17

Air flow (at High) CMM 7/7 19.5/20.5 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow) –

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ9.52 (3/8") Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

–

Gas line : 0.35 m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-13

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK258CENF-L (Indoor unit)

SRC258CENF-L (Outdoor unit)

Item

Model

SRK258CENF-L SRC258CENF-L

Cooling capacity

(1)

W 2200/2250

Power source 1 Phase. 220/240 V, 50 Hz

Cooling input kW 0.66/0.74 Running current (Cooling) A 3.3/3.4 Inrush current A 17.3/18.9 COP (In cooling) 3.33/3.04 Noise level

(5)

dB (A) 38/39 41/42

Exterior dimensions mm

275 × 790 × 174 542 × 795 × 255

Height × Width × Depth

Color Ivory white Polar white Net weight kg 7.5 31 Refrigerant equipment

– RM5485GNE1 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 0.6

Starting method – Line starting Heat exchanger Louver fins & inner grooved tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.71 Refrigerant oil R 0.3 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 16 11

Air flow (at High) CMM 7.5/7.5 22/22 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow) –

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ9.52 (3/8") Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

–

Gas line : 0.35 m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-14

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK288CENF-L (Indoor unit)

SRC288CENF-L (Outdoor unit)

Item

Model

SRK288CENF-L SRC288CENF-L

Cooling capacity

(1)

W 2500/2550

Power source 1 Phase, 220/240 V, 50 Hz

Cooling input kW 0.87/0.95 Running current (Cooling) A 4.1/4.2 Inrush current A 18.2/19.6 COP (In cooling) 2.87/2.68 Noise level

(5)

dB (A) 38/39 41/42

Exterior dimensions mm

275 × 790 × 174 542 × 795 × 255

Height × Width × Depth

Color Ivory white Polar white Net weight kg 7.5 33 Refrigerant equipment

– RM5512GNE1 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 0.9

Starting method – Line starting Heat exchanger Louver fins & inner grooved tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.75 Refrigerant oil R 0.35 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 16 11

Air flow (at High) CMM 7.5/7.5 22/22 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow) –

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ9.52 (3/8") Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

–

Gas line : 0.35 m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-15

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK328CENF-L (Indoor unit)

SRC328CENF-L (Outdoor unit)

Item

Model

SRK328CENF-L SRC328CENF-L

Cooling capacity

(1)

W 2750/2750

Power source 1 Phase, 220/240 V, 50 Hz

Cooling input kW 0.93/0.99 Running current (Cooling) A 4.3/4.4 Inrush current A 18.2/19.6 COP (In cooling) 2.96/2.78 Noise level

(5)

dB (A) 40/42 42/44

Exterior dimensions mm

275 × 790 × 174 542 × 795 × 255

Height × Width × Depth

Color Ivory white Polar white Net weight kg 8 33 Refrigerant equipment

– RM5512GNE1 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 0.9

Starting method – Line starting Heat exchanger Louver fins & tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 0.7 Refrigerant oil R 0.35 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 16 9

Air flow (at High) CMM 8.5/8.5 22/22.5 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow) –

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

–

Gas line : 0.35 m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-16

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK408CENF-L (Indoor unit)

SRC408CENF-L (Outdoor unit)

Item

Model

SRK408CENF-L SRC408CENF-L

Cooling capacity

(1)

W 3500/3500

Power source 1 Phase, 220/240 V, 50 Hz

Cooling input kW 1.320/1.405 Running current (Cooling) A 6.4/6.4 Inrush current A 33.6/36.6 COP (In cooling) 2.65/2.49 Noise level

(5)

dB (A) 40/42 47/49

Exterior dimensions mm

275 × 790 × 174 542 × 795 × 255

Height × Width × Depth

Color Ivory white Polar white Net weight kg 8 37 Refrigerant equipment

– RM5517GNE4 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 1.3

Starting method – Line starting Heat exchanger Louver fins & tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.3 Refrigerant oil R 0.6 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 16 18

Air flow (at High) CMM 8.5/8.5 22/22.5 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow) –

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

–

Gas line : 0.35 m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-17

Model SRK501CENF-L (Indoor unit)

SRC501CENF-L (Outdoor unit)

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Item

Model

SRK501CENF-L SRC501CENF-L

Cooling capacity

(1)

W 4500/4500

Power source 1 Phase, 220/240V, 50 Hz

Cooling input kW 1.78/1.88 Running current (Cooling) A 8.4/8.2 Inrush current A 39/42 COP (In cooling) 2.53/2.39 Noise level

(5)

dB (A) 44/44 50/51

Exterior dimensions mm

275 × 790 × 189 615 × 850 × 290 + 30

Height × Width × Depth

Color Ivory white Polar white Net weight kg 9 52 Refrigerant equipment

– RM5523GNE4 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 1.7

Starting method – Line starting Heat exchanger Louver fins & tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.28 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 23 40

Air flow (at High) CMM 11/11 34/34 Air filter, Q’ty Polypropylene net (washable) × 2 –

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment – Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

–

Gas line : 0.35m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

1-18

(2) The operation data are applied to the 220 V or 240 V districts respectively. (3) Limitation of Voltage application

Minimum: 198 V Maximum: 264 V

(4) The refrigerant quantity to be charged includes the refrigerant in 7.5 m connecting piping.

(5) Expressed in sound pressure level.

Notes (1) The data are measured at the following conditions.

Model SRK561CENF-L (Indoor unit)

SRC561CENF-L (Outdoor unit)

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C JIS C9612, ISO-T1

Item

Model

SRK561CENF-L SRC561CENF-L

Cooling capacity

(1)

W 5000/5000

Power source 1 Phase, 220/240V, 50 Hz

Cooling input kW 2.08/2.18 Running current (Cooling) A 10.2/9.53 Inrush current A 44/48 COP (In cooling) 2.40/2.29 Noise level

(5)

dB (A) 45/45 53/54

Exterior dimensions mm

275 × 790 × 189 615 × 850 × 290 + 30

Height × Width × Depth

Color Ivory white Polar white Net weight kg 9 52 Refrigerant equipment

– RM5526GNE4 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 1.9

Starting method – Line starting Heat exchanger Louver fins & tubing Refrigerant control Capillary tubes

Refrigerant

(4)

kg R22 1.35 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 23 40

Air flow (at High) CMM 12/12 34/34 Air filter, Q’ty Polypropylene net (washable) × 2 –

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment

–

Dome mounted protector (for compressor) Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.4m

–

Gas line : 0.35m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation

data

(1)

Refrigerant

piping

1-19

Model SRK50A (Indoor unit)

SRC50CA (Outdoor unit)

(2) The operation data are applied to the 220V, 230V or 240V districts respectively. (3) The refrigerant quantity to be charged includes the refrigerant in 7 m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, (When it is 7 to 15 m, add 20 g refrigerant per meter.)

(4) When the unit is operated in cooling or dehumidification mode at the outside air temperature of 1ºC and less, there is a possibility that water leakage

occurs at the indoor unit.

Notes (1) The data are measured at the following conditions.

Item

Model

SRK50A SRC50CA

Cooling capacity

(1)

W 4500

Power source 1 Phase, 220/230/240V, 50 Hz

Cooling input kW 1.79 Running current (Cooling) A 8.4/8.0/7.7 Inrush current A 39/41/42 COP (In cooling) 2.51

Noise level

Sound level

Hi : 44 Lo : 37 51

Power level Hi : 58 Lo : 51 65

Exterior dimensions mm

298 × 798 × 203 640 × 850 × 290

Height × Width × Depth

Color Noble white Stucco white Net weight kg 10 44 Refrigerant equipment

– RM5523GNE4 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 1.7

Starting method – Line starting Heat exchanger Louver fins & grooved tubing Refrigerant control Capillary tubes

Refrigerant

(3)

kg R22 1.45 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 23 35

Air flow (at High) CMM 11 39 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment

–

Dome mounted protector (for compressor)

Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.5m

–

Gas line : 0.43m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 3 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation data

(1)

Refrigerant

piping

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C ISO-T1, JIS C9612

1-20

(2) The operation data are applied to the 220V, 230V or 240V districts respectively. (3) The refrigerant quantity to be charged includes the refrigerant in 7 m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, (When it is 7 to 15 m, add 20 g refrigerant per meter.)

(4) When the unit is operated in cooling or dehumidification mode at the outside air temperature of 1ºC and less, there is a possibility that water leakage

occurs at the indoor unit.

Notes (1) The data are measured at the following conditions.

Model SRK56A (Indoor unit)

SRC56CA (Outdoor unit)

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27°C19°C35°C24°C ISO-T1, JIS C9612

Item

Model

SRK56A SRC56CA

Cooling capacity

(1)

W 5000

Power source 1 Phase, 220/230/240V, 50 Hz

Cooling input kW 2.08 Running current (Cooling) A 9.7/9.3/8.7 Inrush current A 44/46/48 COP (In cooling) 2.40

Noise level

Sound level

Hi : 45 Lo : 38 54

Power level Hi : 59 Lo : 52 68

Exterior dimensions mm

298 × 798 × 203 640 × 850 × 290

Height × Width × Depth

Color Noble white Stucco white Net weight kg 10 44 Refrigerant equipment

– RM5526GNE4 (Rotary type) × 1

Compressor types & Q’ty

Motor kW – 1.9

Starting method – Line starting Heat exchanger Louver fins & grooved tubing Refrigerant control Capillary tubes

Refrigerant

(3)

kg R22 1.45 Refrigerant oil R 0.7 (BARREL FREEZE 32SAM) Air handling equipment

Tangential fan × 1 Propeller fan × 1

Fan type & Q’ty

Motor W 23 35

Air flow (at High) CMM 11 39 Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Wireless-Remote controller –

Operation switch Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow),

–

ECONO (Orange), HI POWER (Green)

Safety equipment

–

Dome mounted protector (for compressor) Internal thermostat (for fan motor)

O.D mm (in) Liquid line: φ6.35 (1/4") Gas line: φ12.7 (1/2") Connecting method Flare connecting Attached length of piping Liquid line: 0.5m

–

Gas line : 0.43m

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 3 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 3 cores (Including earth cable)

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Connection wiring

Operation data

(1)

Refrigerant

piping

1-21

1.2 SELECTION DATA

1.2.1 Specifications

Model SRK25GZ-L1 (Indoor unit)

SRC25GZ-L1 (Outdoor unit)

Item

Model

SRK25GZ-L1 SRC25GZ-L1

Cooling capacity

(1)

W 2500 [900~2900]

Heating capacity

(1)

W 3400 [900~4000]

Power source 1 Phase, 220/240V, 50Hz

Cooling input kW 0.96 [0.31~1.22] Running current (Cooling) A 4.8 Heating input kW 1.17 [0.28~1.35] Running current (Heating) A 5.8 Inrush current A 5.8 COP (In cooling) 2.60 Noise level dB (A) Cooling: 38 Heating: 39 Cooling: 46 Heating: 46

Exterior dimensions

Height × Width × Depth mm

250 × 750 × 178 540 × 645 × 245

Color Ivory white Polar white Net weight kg 7.5 28 Refrigerant equipment

Compressor type & Q’ty

– RM5465GA1 (Rotary type) × 1

Motor kW – 0.75

Starting method – Line starting Heat exchanger Louver fins & bare tubing Refrigerant control Capillary tubes Refrigerant

(4)

kg R22 0.64 (Pre-Charged up to the piping length of 5m) Refrigerant oil R 0.35 (BARREL FREEZE 32SAM) Deice control MC control

Air handling equipment

Fan type & Q’ty

Tangential fan × 1 Propeller fan × 1

Motor W 18 20

(Cooling) 7.0 21

Air flow (at High)

(Heating)

CMM

7.5 21

Air filter, Q’ty Polypropylene net (washable) × 2–

Shock & vibration absorber – Cushion rubber (for compressor) Electric heater –– Operation control

Operation switch

Wireless-Remote controller –

Room temperature control MC. Thermostat – Pilot lamp RUN (Green), TIMER (Yellow)

Safety equipment

O.D mm (in) Liquid line: φ6.35 (1/4″) Gas line: φ9.52 (3/8″) Connecting method Flare connecting Attached length of piping Liquid line: 0.4 m

Gas line : 0.35 m

–

Insulation Necessary (Both sides) Drain hose Connectable Power source cord 2.5 m (3 cores with Earth)

Size × Core number 1.5 mm2 × 4 cores (Including earth cable)

Connection wiring

Connecting method Terminal block (Screw fixing type) Accessories (included) Mounting kit Optional parts –

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature

Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC JIS C9612, ISO-T1

Heating 20ºC – 7ºC 6ºC JIS C9612, ISO-T1

(2) The values for performance and power consumption shown in brackes [~] indicate the range from minimum to maximum. (3) The operation data are applied to the 220/240V districts respectively. (4) Limitation of Voltage application Minimum: 198V Maximum: 264V (5) The refrigerant quantity to be charged includes the refrigerant in 5 m connecting piping.

(Purging is not required even in the short piping.) If the piping length is longer, (When it is 5 to 15 m, add 20 g refrigerant per meter.)

Operation data

(1)

Refrigerant

piping

Compressor: Overheat protection, heating overload protection (High pressure control), overcurrent protection, serial signal error protection, indoor fan motor error protection

+ 47 hidden pages

Mitsubishi SRC208HENF-L, SRK288HENF-L, SRC328HENF-L2, SRK408HENF-L3, SRC408HENF-L3 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual