Mitsubishi Electric MR-L650EN, MR-L710EN Operating Instructions Manual
Refrigerator-Freezers
OPERATING INSTRUCTIONS
SERIES MODEL
MR-L650EN
MR-L710EN
Please read this manual carefully and follow the information contained within. In particular, be sure to read the safety precautions before using this refrigerator.
Be sure to receive your copy of the warranty from the retailer and confirm that the purchase date and retailer name are written on the warranty.
Store this operating instruction manual and the warranty in a safe place.
This refrigerator was manufactured for refrigerating and freezing of foods in general households. For commercial use, please use a commercial refrigerator-freezer.
The principal plastic components indicate the material name to facilitate recycling.
It is strongly recommended to use only lukewarm water and a soft cloth when cleaning.
Cleaning agents can cause cracking to the plastic components of your refrigerator.
Cleaning Instruction - Important!
2
Function OverviewFunction Overview
Illustration of the MR-L710EN
This refrigerator is manufactured for refrigerating and freezing foods in general households. For industrial use,
please use a commercial refrigerator-freezer.
The photographs and illustrations contained in this manual are for the MR-L710EN. While the capacity and
dimensions of the MR-L710EN are different from the MR-L650EN the operation is the same.
The material names are indicated on the main plastic parts to facilitate recycling.
ContentsContents
Vitamin Factory
The vitamins in vegetables
are boosted by the LED.
ENERGY SAVING MODE
Use when you want to save power.
When the temperature inside
the refrigerator is stable, the
power-saving operation is
performed automatically.
For your safety, please be sure to
follow these instructions
4 - 5
From Installation to Operation
6 - 7
How to Use the Operation Panel
8 - 9
Refrigerator Compartment
1 0 - 1 1
Freezer Compartment
1 2
Rapid Cool
1 3
Rapid Freeze
1 4
Energy Saving Mode
1 5
Performing Temperature Adjustment
1 6
How to remove and clean accessories
1 7 - 1 8
Other lssues
1 9 - 2 2
Troubleshooting
2 3 - 2 4
Accessories
2 5
Page
3
Before use Operation Cleaning When in trouble
4
For your safety, please be sure to follow
these instructions
For your safety, please be sure to follow
these instructions
The types of danger that can result from improper
handling are explained in the sections below.
ٹ
The symbols illustrated below have
the following meanings.
Mishandling can lead to serious injury
or death.
Mishandling can lead to bodily injury or
loss of home and household contents.
Do not do
Do not get
wet
CAUTION
Always connect
an earth wire
Always unplug
electrical plug
from socket
Always follow
instructions
Do not install in an outdoor area
where water can get on it or
where there is a lot of moisture.
➡ Page 6
Due to insulation failure, it may cause
an electric shock or fire.
Remove dust from the electrical
plug.
Not doing so can cause a fire
from insulation failure.
Allow some space around the refrigerator.
If the refrigerant (gas) leaks, it can remain in
the area and there’s a risk that it may cause
a fire or explosion.
➡ Page 6
To be prepared for an earthquake, affix to
a strong wall or column.
Not doing so may cause injuries from
the refrigerator toppling over.
➡ Page 7
Attach ground wire and earth leakage breakers
when used in a humid or moist area.
It may cause electric shock and the following
ground connection may cause electric shock,
explosion and fire.
・
・
Water pipe/gas pipe.
Telephone ground lines and lightning rod.
(Please consult with the shop).
➡ Page 6
When installing your unit
About the electrical outlet and electrical plug
About the electrical outlet and electrical plug
Do not push the electrical plug with
the back of the refrigerator.
Do not damage the electrical cord.
If the plug is pressed by the refrigerator,
or if the cord is bent, bundled, or a
heavy object is placed on it, it can
cause an electric shock or a fire.
Using them can result in an electric shock or injury.
Do not use damaged cords or plugs or loose outlets.
Do not remove the electrical plug by pulling the cord.
The cord can become damaged and can cause
an electric shock or a fire.
Do not plug or unplug the electrical plug with wet hands.
It can cause an electric shock.
Using an extention cord or plugging in too many power cords
into the outlet can cause heat buildup or a fire.
➡ Page 6
Use a dedicated outlet for the power supply that meets
the rating specified on the rating label. (The rating label is
located on the door-liner of the refrigerator compartment.)
If it is plugged with the cord facing upward, extra pressure
gets exerted on it which can cause it to heat up or ignite.
Keep the electrical plug cord facing
downwards and insert the plug in fully.
If the power cord is damaged call Mitsubishi Electric
Service Centre for a technician to replace power cord.
The power cord should be designed for this model.
If the power cord is damaged.
WARNING
When replacing the interior refrigerator
light or when taking care of the unit,
pull out the electrical plug.
Not doing so can result in an electric shock
or injury.
About using your refrigerator
Do not damage the refrigerant circuit (piping)
of the refrigerator; do not drive in screws.
Because a flammable refrigerant (gas) is used,
there is the danger of igniting or explosion.
Do not use electrical products inside
the refrigerator unit.
If the refrigerant (gas) is leaking inside the unit,
there is a risk that a spark from the electrical product’s
contact can be a source for ignition or explosion.
Do not store volatile products that can easily ignite.
Benzine, cosmetics and hair styling products can
be the cause for igniting fires and explosion.
Do not store pharmaceuticals or scientific test material.
Anything that needs strict supervision must not
be stored in a home-use refrigerator.
Do not place items on top of the refrigerator.
Items may drop from opening and
closing the door and can cause injury.
Do not hang on the door or door handle and do
not stand on the compartment drawer-type doors.
The refrigerator can topple over causing injury.
Do not forcefully place items on the
glass shelf.
The glass can break and may cause injury.
Do not put your hands in the mechanical part of the
automatic ice-maker (the upper part of the ice storage box).
Doing so will cause injury.
Do not use flammable sprays nearby.
A spark from the electrical contact can ignite and cause a fire.
Do not do
Always follow
instructions
Always follow
instructions
Do not get wet
Always connect
an earth wire
Do not do
Always follow
instructions
WARNING
CAUTION
This appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they
do not play with the appliance.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Always unplug electrical
plug from socket
5
Before use Operation Cleaning When in trouble
CAUTION
WARNING
When something abnormal or unusual
occurs, turn off immediately and consult with
“the store where you purchased the unit” or
with a “Mitsubishi Electric repair counter.”
Do not use in a shed or a garage.
If small animals damage the wiring,
it can cause an electric shock or a fire.
Do not put any vessels, jars, etc. that
contain water on top of the refrigerator.
If water gets onto electrical parts, it will cause
an electric shock or a fire.
If you sense a gas leakage, do not touch the refrigerator.
Open the window and ventilate the room.
About using your refrigerator
About Malfunctions / Long Term Care
Do not take apart, repair or convert.
Do not continue to use with damaged parts.
This can cause injury, an electric shock or
a fire.
If the refrigerant circuit (piping) is
damaged, do not touch the refrigerator,
open the window and ventilate the room.
If you will not be using the refrigerator for a long
period of time, after pulling out the electrical
plug, open the door and let the interior dry out.
If it is not dried adequately, the cooling unit may
corrode causing the refrigerant (gas) to leak which
can then cause the danger of ignition or explosion.
If it continues to run in an abnormal state,
it can cause an electrical shock or a fire.
If something abnormal occurs (such as a
burning smell), pull out the electrical plug
and stop the refrigerator from running.
It is dangerous if the child gets shut inside.
If there is a possible danger of a child
getting trapped inside while the refrigerator
is not in use, please pull off the door seal.
Always follow
instructions
Do not do
Install on a strong level floor and adjust
the adjustable legs to fix firmly.
The refrigerator may move and cause injury.
➡ Page 6〜7
When carrying, use the handles made for
carrying.
If other parts are held while carrying,
it can cause injury.
Be careful not to damage the floor
or injure yourself when moving
the refrigerator.
Lay a protective sheet on the floor
and move the refrigerator slowly.
➡ Page 21
Installing and Transporting
About using your refrigerator
If insufficiently attached, it may fall out
and may cause injury.
Make sure that glass shelves or
pockets are attached properly.
Always follow
instructions
Do not do
Do not charge with any refrigerant other
than our specification.
It may cause rupture, explosion, fire, etc.
when using, repairing, disposal, etc.
Do not do
Do not get wet
Do not wash with water or spill liquid
food items on the unit.
If water and food liquids get on the unit, it can cause an
electric shock or a fire. If that happens, dry off immediately.
A spark from the electrical contact can cause
an explosion or a fire.
The door or furniture may be damaged and
cause any injury.
When the doors are opened or closed,
beware not to hit any furniture.
When the refrigerant circuit is damaged,
please consult the store in which the unit
was purchased.
Always follow
instructions
Always unplug
electrical plug
from socket
When Recycling
If it is neglected and refrigerant (gas) leaks, ignition or
an explosion may be caused due to heat from a fire.
When disposing of the unit, transfer it to the
store that you purchased it or to the municipality.
Do not force food items into the refrigerator.
Do not use force to pull out shelves.
Food items may fall out, causing injury.
Do not store bottles in the freezer
compartment.
If the center freezes and bottles crack,
it will cause injury.
Do not place your hands or feet
under the refrigerator.
You can get injured from something
such as the steel plate.
Do not eat food that has a bad smell
or is discoloured.
Doing so may cause food poisoning or other
illnesses.
Observe the following when opening and
closing the doors.
!"#$"%$&"$'(%"$)"*+$,("&-(".$$),"/-(%
another person is touching the refrigerator.
!"#$"%$&"'0&"1$0)"23%4(),"$%"&-("&$'"(.4(
of a drawer type door while closing it.
!"
Do not open or close the doors with excessive
force. (Food may fall out and cause injury.)
!"5("*6)(20+"%$&"&$"&)6'"1$0)"23%4(),"$)
any other part of your body.
!"5("*6)(20+"%$&"-3&"6"'6)&"$2"1$0)"7$.18
!"#$"%$&"&)6'"1$0)"2((&"/3&-"&-(
bottom drawer. (Danger of your
toes caught by the drawer.)
Not doing this may cause injury.
Do not touch foods or containers
in the freezer compartment
with wet hands.
Doing so can cause freezer burn.
503+&90'"2)$,&":61"*60,("3%;0)1"/-(%")(:$<3%48
Please take care when removing ice
from the ice box.
CAUTION
Always follow
instructions
Always follow
instructions
6
From Installation to OperationFrom Installation to Operation
Use a dedicated outlet
Use a dedicated outlet for the power supply that meets the rating specified on the
rating label. (The rating label is located on the door-liner of the refrigerator compartment.)
The refrigerator will not be damaged even if the power
is supplied soon after installation. It takes a while for the
refrigerator to cool, therefore supply power as soon as possible.
Electrical Connections
Make sure this unit is properly grounded.
The refrigerator should always be plugged into its dedicated electrical outlet.
This will provide the best performance and prevent electrical circuits
from being overloaded and causing a fire. Make sure that the electrical outlet
provides the proper voltage. Extension cords are not recommended.
If your refrigerator is installed in a high humidity location, not only ground
connection but also installation of the earth leakage breaker is recommended.
If the power cord is damaged, purchase a new cord from MITSUBISHI ELECTRIC
SERVICE CENTRE. Make sure that the power cord is designed for this model.
If the power cord is damaged, call our MITSUBISHI ELECTRIC SERVICE CENTRE
for the replacement, in order to avoid a hazard.
The outside of the refrigerator and the
rotating partition get hot.
Cooling takes time after turning
on the refrigerator.
Connect the power supply
*Connect power supply soon after installing the refrigerator
2
WARNING
Using outlets that do not meet the specified rating or plugging in
too many leads into a single socket can cause heat buildup or fire.
Rotating
partition
!"#$%&"'(&%)"&*+",+-,%.+,$&/,"*$0"-'))1"2//)+3"4+-/,+"0&/,%(.
non-cooled food or ice cream.
!"5/"(/&"/6+("&*+"3//,0"7/,+"&*$("(+2+00$,18"$(3"2)/0+
them as soon as possible.
In summer it may take more than 24 hours before the first
batch of ice is made.
Heat radiation causes
the temperature to rise to
about 50
o
C to 60oC when
operation is first started,
and during the summer. The
rotating partition may get hot
when heated by the heater.
#*+("7$9%(."%2+"-/,"&*+"-%,0&"&%7+
A gap of
at least 10 cm
A gap of
at least 6 cm
Dedicated
outlet that meets
the specified rating.
A gap of
at least 3 cm
Turn on the power of the
refrigerator as soon as
possible.
The refrigerator will not be
damaged even if you turn on
the power immediately after
the installation.
Install the refrigerator in:
A place with good ventilation that is not
exposed to direct sunlight of hot air
To prevent a diminishing in cooling
performance and to reduce power costs.
A place with low humidity
To prevent rusting, electric shock and fire.
A strong and level place
To prevent vibration and noise, and ajar
or tilting doors.
If the refrigerator supports sink easily into the floor
material, lay a strong plate or board underneath.
(To prevent deformation or discoloration
due to the weight or heat.)
A place away from other devices
To prevent noise or video interference
with devices such as televisions.
A place with at least 3 cm of
space beside the left and right of
the refrigerator, 10 cm of space from
the top and 6 cm from the back.
To allow heat to dissipate from the sides,
top and the back of the refrigerator.
Installation
1
WARNING
5/"(/&"/40&,'2&"&*+",+-,%.+,$&/,":+(&0
or the space around the refrigerator.
If refrigerant leaks, it may accumulate
and catch fire or explode.
Corrosion control treatment may be
required for the refrigerant circuit (pipe)
due to generation of corrosive gases.
Contact the retail store where you
purchased the refrigerator.
Use in hot spring areas
How to remove the energy label
Remove the energy label carefully. A glue residue may remain, particularly if
the label has been in place for a long period of time.
Apply either Eucalyptus or Tea Tree oil directly on any residue.
5/"(/&"$))/;"&*+"/%)"&/",'("/,"3,%6"/(&/"6)$0&%2"6$,&0"$0"%&"7$1"2$'0+"&*+"6)$0&%2
to degrade and potentially crack over time.
Allow the oil to sit for approximately 1-2 minutes, or until the glue residue has softened.
#%6+"/--";%&*"$"3$76"2)/&*<
If any residue remains, repeat the above process.
Rinse with clear water.
5,1"&*/,/'.*)1<
●
●
●
●
●
●
●
●
7
Before use Operation Cleaning When in trouble
Prepare for earthquakes.
Strong belts
WARNING
Thread 2 strong belts through the hand-holds on the top rear
of the refrigerator and anchor them to a strong location, such
as wall or post.
The refrigerator may tip
over and cause injury.
The operation noise gets
louder immediately after
installation.
Immediately after instillation, when:
the weather is hot, the doors are
frequently opened or closed, or
any similar situation; the operation
noise will get louder because the
refrigerator will switch to high-speed
operation to cool with high power.
Although R600a refrigerants are combustible, the refrigerant
circuit is hermetically sealed and normally leaks will not occur.
WARNING
Should the refrigerant circuit be damaged:
1. Do not use flames or electrical appliances nearby.
2. Open the windows to fully ventilate the room.
Then, contact the retail store where you purchased the refrigerator.
Do not damage the refrigerant
circuit (pipes) or drive screws into it.
Preventing ajar doors
Adjusting a tilted door or unevenness Installing the support cover
While the freezer door is open
Insert the support cover horizontally
and fully, until it makes contact with
the rear side.
Support cover
The support cover is stored inside
the refrigerator compartment
at shipment.
4
Adjustment and anchoring
Turn the adjustable supports until they touch the floor and
the front casters are raised from the floor.
3
Adjust the supports to
make the refrigerator
level.
If the front of the
refrigerator is slightly
raised, the doors are
easier to close.
Readjust the adjustable supports as
shown in the figures below.
The right door tilts down
Raise the right side
Right Left
The left door tilts down
The support covers are designed for the
left and right adjustable supports respectively.
Raise the left side
If the installation
location is not level or
the supports sink after
a few days due to the
weight of the food,
the doors may appear
tilted.
Readjust the supports.
Adjustable
support
Flat-blade
screwdriver
Caster
Insert the blade of the screwdriver
Turn the adjustable supports
in the arrow direction until
they touch the floor.
Support cover
(To prevent vibration, noise, movement, and ajar doors)
Bottom front of refrigerator
If the supports are not
adjusted properly, the
refrigerator may move
and cause injury.
CAUTION
Support cover
Adjustable
support
If the door is still tilted after adjustment of the supports
When installing the refrigerator in
the corner of a room, one of the
rear supports may sink, causing the
refrigerator to tilt. If this happens,
use a caster support or strong board
for adjustment. (Normally, use a
board with a thickness of about 2 to 3 mm.)
Rear support
Caster support
or strong board
8
How to Use the Operation PanelHow to Use the Operation Panel
Touching will cause the operable icons to light up.
To save power, all displays other than are usually turned off (it turns
off if there is no operation after 30 seconds).
When operating, be sure to touch the buttons with your fingers.
Touch to go to
compartment selection;
Touch to go to temperature
settings.
Detail Setting
Example: When setting the
refrigerator compartment to "COLD"
When ENERGY SAVING is set, and the
refrigerator is running efficiently,
ECO icon mark will light up. Page 15
ECO icon mark
Child Safety Lock Page 19
If you touch the operation panel, icons will be displayed.
You can select the setting that you prefer.
Touch an icon to display its setting details.
Rapid Cool
To cool a large amount of food quickly in refrigerator compartment.
Energy Saving Mode
To save power.
Rapid Freeze
To freeze a large amount of food quickly in freezer compartment.
When turning ON or OFF settings,
touch one of these.
Before use Operation Cleaning When in trouble
9
In the following cases, the display may not change even when you touch it.
Wipe the moisture and dirt off your fingers.
Perform operations with your hands. After you have touched an icon, confirm that the display has changed before touching again.
The response may vary, depending on the surrounding temperature, humidity, the health condition of the person who operates it,
and the operating condition of neighboring electric appliances.
The operation
panel or your
fingers are wet
or dirty.
The interval between
touches is too short.
(Pressing repeatedly
may cause a
misdetection)
You are wearing gloves or
have sticking plaster on your
finger.
To Cancel the Setting
Touch
3
The text above the
icon will disappear.
[OFF MODE]
will light up.
Touch the icon
to cancel
2
Touch
1
Operation Example (When Setting RAPID COOL)
In and , touching
returns the display to the previous state.
Detail Setting
Pages 16
When you keep the door of the refrigerator open,
touch for about 1 second. (until the buzzer
sounds once)
1
Touch
Operable icons light
up.
It lights up for 5
seconds after
setting.
The text above the
touched icon lights up.
Touch the icon to set
Here touch .
2
3
Confirm the setting details
then touch .
Loading...