Mitsubishi Electric GT1020, GOT1000, GT1030 Startup Manual
MITSUBISHI ELECTRIC
GOT1000
GT1020/GT1030 to FR-S500(E) Inverter
Start-up Guide
Art.-Nr.: xxxxxx
12 11 2008
Ver s i o n A
MITSUBISHI ELECTRIC
INDUSTRIAL AUTOMATION
b
About this Manual
The texts, illustrations, diagrams and examples in this manual are only intended as aids to help
explain the functioning, operation, use and programming of the GOT1000 terminals in combination with an FR-S500 Inverter.
If you have any questions regarding the installation and operation of the hardware described in
this manual, please do not hesitate to contact your sales office or one of your Mitsubishi distribution partners.
CAUTION:
Do not attempt to install, operate, maintain or inspect the grafical operator terminal or
the inverter until you have read through the correrponding instruction manual carefully and can use the equipment correctly. Do not use the inverter until you have a full
knowledge of the equipment, safety information and instructions.
You can also obtain information and answers to frequently asked questions from our Mitsubishi
website under www.mitsubishi-automation.com.
No part of this manual may be reproduced, copied, stored in any kind of information retrieval system or distributed without the prior express written consent of MITSUBISHI ELECTRIC.
MITSUBISHI ELECTRIC reserves the right to change the specifications of its products and/or
the contents of this manual at any time and without prior notice.
b
© Version A November 2008
Manual References:
Refer to the following manuals for more detailed explanations. For any further questions, please
contact your local Mitsubishi Product Provider.
● GOT1000 Series Connection Manual 3/3 (SH(NA)-080532ENG), Sections 37.1 to 37.6
● FR-S 500, Frequency Inverter, Instruction Manual Detailed (IB(NA)-0600027-C)
CAUTION:
This Start-up Guide includes a brief summary of the main specifications of the
GOT1000 graphic operation terminals and the FR-S500 series of inverters, which
should be sufficient to enable experienced users to install and configure the units.
For further information on the operation terminals and the inverters please refer to the
above mentioned manuals.
Please observe also the safety precautions given in the manuals mentioned above.
GOT1000 I
II
Table of Contents
Table of Contents
1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2 Hardware Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
3 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3.1 GOT and Inverter Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.2 GOT Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3.3 Programming Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4 GT Designer 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5 Inverter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6 Station Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6.1 Indirect Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
7 Confirm Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
GOT1000 III
Loading...