2001 No.159E
MITSUBISHI
Mitsubishi PLC
NEW PRODUCT RELEASE
Ethernet Interface module
QnA Series : AJ71QE71N-B5T,AJ71QE71N-B2,A1SJ71QE71N-B5T,A1SJ71QE71N-B2
A Series : AJ71E71N-B5T,AJ71E71N-B2,A1SJ71E71N-B5T,A1SJ71E71N-B2
Available soon!
[New Features]
(1) Increased range of connections to match the system configuration.
With the introduction of the 10BASE-T connection Ethernet interface module (hereinafter, Ethernet
module), the PLC and personal computer can now be connected with 10BASE5, 10BASE2, or 10BASE-T.
New product Old product
QnA
Series
A
Series
AJ71QE71N-B2 ! N/A N/A AJ71QE71 ! ! N/A
AJ71QE71N-B5T N/A ! ! AJ71QE71-B5 N/A ! N/A
A1SJ71QE71N-B2 ! N/A N/A A1SJ71QE71-B2 ! N/A N/A
A1SJ71QE71N-B5T N/A ! ! A1SJ71QE71-B5 N/A ! N/A
AJ71E71N-B2 ! N/A N/A
AJ71E71N-B5T N/A ! !
A1SJ71E71N-B2 ! N/A N/A A1SJ71E71-B2-S3 ! N/A N/A
A1SJ71E71N-B5T N/A ! ! A1SJ71E71-B5-S3 N/A ! N/A
Type
10BASE2 10BASE5 10BASE-T
(2) High-speed internal processing
With the Ethernet module's faster internal processing, the PLC responds much faster when exchanging
data with an external device.
The following table shows the minimum transmission delay time (reference value) on the PLC side when
using each communication function.
(This is based on the PLC CPU scan time of 10ms.)
Communication function Outline of communication process
Using read/write data in
the PLC CPU
Using fixed buffers
Using random access
buffers
UDP/IP communicationCommunication with binary
code dataReading of D0 to D99
TCP/IP communicationCommunication with binary
code dataCommunication of 1017 words of data
UDP/IP communicationCommunication with ASCII
code dataReading of 508 words of data
Interface (*1) Interface (*1)
*1. Indicates the communication interface for the corresponding unit. (!: Available)
Type
AJ71E71-S3 ! ! N/A
10BASE2 10BASE5 10BASE-T
QnA Series A Series
New
product
27 43 40 56
65 118 65 118
10 42 10 42
Old
product
New
product
Old
product
(Unit: ms)
2