Mitsubishi A, A6PHPE-220VD, A6PHPE-240AU, AGPHPE-115U, A6PHPE-240UK User Manual
...
INTRODUCTION
Thank you for your purchase of Mitsubishi General-Purpose Programmable Controller MELSEC-A.
Prior
to
use, please read this User's Manual carefully to fully understand the functions and perfor-
mances of the
A
series programmable controller and also to use it correctly.
Please
forward this User's Manual to the end user.
CONTENTS
.
1
.
GENERAL DESCRIPTION
..............................................
1-1 -1-2
2
.
NOMENCLATURE AND HANDLING
.....................................
2-1 -2-4
2.1 Keyboard and Display
....................................................
-2-1
2.1.1 Display panel viewing angle adjustment
..................................
2-2
2.1.2
Use
of the floppy disk (FD)
..........................................
2-2
2.1.3
Use
of the memory card
.............................................
2-2
2.2 Connectors and Interface Sockets
............................................
2-4
3
.
SPECIFICATIONS
.....................................................
3-1 -3-5
3.1 General Specifications
.....................................................
3-1
3.2 Performance Specifications.
................................................
3.2
3.3 Hardware Information
.....................................................
3.3
3.3.1 Keyboard specifications
.............................................
3-3
3.3.2 Plasma display specifications
..........................................
3-3
3.3.3 Floppy disk drive (FDD) specifications
..................................
3-4
3.3.4 RS-232C interface specifications
.......................................
3-4
3.3.5 RS-232C connector pin-outs
.........................................
-3-4
3.3.6 RS-422 interface specifications
........................................
3-4
3.3.7 RS-422 cable specifications
...........................................
3.5
3.3.8 Power fuse specifications
.............................................
3-5
4
.
HARDWARE SELF-CHECK
..................................................
4-1
4.1 A6PHP Hardware Check Procedure
..........................................
4-1
......................................................
APPENDICES
.AP P-1
-
APP-3
APPENDIX 1
General
Use
..................................................
.AP P-1
APPENDIX 2
External Dimensions
...........................................
.AP P.3
1.
GENERAL DESCRIPTION
1.
GENERAL DESCRIPTION
The AGPHPE handy graphic programmer (referred to
as
"AGPHP")
is
a
peripheral unit for use with MELSEC-A and
K
series
PCs.
It
is
based on a 16-bit microprocessor and features many useful functions
as
well
as
ease
of operation. This Manual describes the AGPHP
hardware.
For
operating instructions, consult the relevant operating
manual for the system being used.
AGPHP features:
1)
Light weight and portable.
2)
The plasma display (referred to
as
"PDP'')
is
clear under a bright
3) The PDP screen allows easy program writing and correcting.
4)
A built-in 3.5-inch floppy disk drive (referred to
as
"FDD") for
program storage.
5) The operating systems for A and
K
series programmable control-
lers are stored on separate disks allowing
great
flexibility.
6)
The RS-232C port allows the printing out of ladder and list
diagrams
as
well
as
cross reference lists,
etc.
7)
By
connecting the PHP to a ROM writer (AGWU) using the
RS-
422 cable, programs and comments can be stored onto ROM.
8)
The PHP system can be booted in approximately five seconds by
inserting the memory card into the built-in memory card interface.
light without flickering and distorting.
Table 1.1 shows all the components included in the AGPHP-SET.
J
Description
-
1
AGPHPE
Main unit
Option
Quantity
Name
ACOSWU (0.3m length, forconnection with AGWU)
0
1
SWlGP-GPPK (for MELSEC-K series start-up)
0
-
AC30R2 (3m length, for connection with printer)
RS-232C cable
0
-
SW3GP-GPPA-1
Floppy disk'
SW3GP-GPPA-2
~
0
1 each
(for MELSEC-A series start-up)
1
SWCLGPPU (for user, already formatted)
Ill0
I
GO-FDC
(for cleaning)
0
1 AGPHP Operating Manual (for SW3GP-GPPA)
0
1
AGPHP Operating Manual (for SW3GP-GPPK)
0
-
Manual
Table
1
.I
AGPHP
Components
[REMARKS]
*The system
disks
can
be
used
with the
GPP.
1-1
1.
GENERAL
DESCRIPTION
Model
Cable
Voltage
(5016OHz
*2Hd
Dostination
W.
Germany
Sweden
Norway
(200-24OV)
1;
%
VD cable
Austria
A6PHPE-220VD
A6PHPE-240UK
AU cable
(200-240V)
1;
%
Australia
A6PHPE-240AU
UL cable
(100-12OV)
:
;;%
United
States
AGPHPE-115UL
UK cable
(200-24OV)
z
i;
%
Great Britain
AGPHPE-115UL
~~
Taiwan
UL cable
(100-12OV)
:
1;
%
AGPHPE-115UL
VD cable
(200-24OV)
1;
%
A6PHPE-220VD
UL cable
(100-120V)
:
;g%
Korea
Table
1.2
Types
of
AGPHPE
AU cable
*--.--
U L cable
UK cable
e-
VD cable
Note:
The length
of
each cable
is
2.5m.
r-
L
1-2
2.
NOMENCLATURE AND HANDLING
2.
NOMENCLATURE AND HANDLING
2.1
Keyboard and Display
4
Note: FDD refers to
Floppy
Disk Drive.
The key switch enables
and
disables
program writing from the AGPHP
. . .
.Permits write from
AGPHP to PC.
Loading...