Mission M-7-C-2 Brochure

product information guide

m7c2 centre channel loudspeaker

Carefully timbre matched to the m70 series acoustic characteristics, the m7c2 provides excellent clarity and
dynamics in home theatre installations for centre channel dialogue and effects.

The m7c2
and easy-drive characteristics make it suitable for all AV amplifiers. Twin 13cm low frequency units integrate
seamlessly with the sheer micro-fibre dome tweeter for wide bandwidth and highly natural vocal performance and
detail. The profiled front baffle ensures good spatial dispersion, minimising "hot seat" effects, and the high power
handling and efficient sensitivity maximises dynamic range.

features benefits

High Impact moulded baffle Excellent HF dispersion and low diffraction to improve

High dB/watt efficiency Equivalent to extra power for amplifier — greater

Sheer Micro-Fibre soft dome HF unit Ensures excellent high and low level resolution.
Neodymium HF unit magnet Improved microdynamics and reduced signal induced

Laser trimmed pressure balanced dome Improved dynamics and reduced time smear.
High-quality crossover components Silicon Steel inductors reduce level dependent

Bonded woven glass composite LF cone Stiff and light ensuring good sensitivity with superb LF

Pressure balanced, ventilated spider Improved dynamics and reduced time smear.
Magnetically shielded Suitable for all AV systems.

construction

Enclosure 15mm high density particle board
Baffle High rigidity MDF and high impact mould
Ports Twin tuned port-tubes
Grille Acoustically transparent
Damping Acoustic long-hair fibre

electrical

L.F. Units Twin 130mm bonded woven glass composite cone with

H.F. Unit 25mm sheer Micro-Fibre soft dome with FF cooling.
Cross-Over Acoustic Second Order.
Terminals Gold-plated, bi-wire multi-way binding posts.

is fully shielded to allow it to be placed in close proximity to TV and video monitors, and its high sensitivity

stereo imaging and create precise images in space.

dynamic range.

demagnetisation effects.

distortion.
Audiophile grade Polyester Capacitors increase detail
transmission.

response.

25mm voice coil.

Phone: [phone] Fax: [phone] Web: www.mission.co.uk

Mission, Symphonix Limited, Huntingdon, PE29 6EY, England

Product designs and specifications subject to change without notice E & OE

Copyright Symphonix Limited 2002

specifications

Enclosure type 2-Way Reflex Loaded
Frequency response ±3dB 70Hz to 20kHz
Nominal Impedance 8 Ohm compatible (min. 5.6 Ohms)
Sensitivity SPL/m/2.83v 89dB
Recommended amplifier power 25 — 125W
Crossover frequency 2.8kHz
Effective volume 9 Litres
Cabinet dimensions (HxWxD) 155 x 510 x 212 (mm)
Weight
Finish Graphiye Black and Satin Silver

setting up

• RUN IN for a minimum of 24 hours with music programme.

• Place on or under a TV monitor or wall mount near a screen.

• Maybe used with any competent budget electronics. Will clearly show improvements as

source improves.

Note: The recommended amplifier power rating is for undistorted power. Loudspeakers will be damaged by
amplifiers overdriven into distortion, no matter what the power rating of the amplifier. For larger rooms or high
listening levels it is safer to choose an amplifier with a power output near the maximum rating of the loudspeaker.

Phone: [phone] Fax: [phone] Web: www.mission.co.uk

Mission, Symphonix Limited, Huntingdon, PE29 6EY, England

Product designs and specifications subject to change without notice E & OE

Copyright Symphonix Limited 2002