product information guide
m7c1i centre channel loudspeaker
For Mission’s new m70i series the ‘i’ stands for ‘improved’. Improved cabinet, improved crossover, improved
performance. Cabinet bracing has been revised to improve panel stiffness and reduce coloration, whilst crossover
redesign has resulted in improved bass performance, increased midrange dynamics and smoother treble detail.
The Mission m7c1i centre channel loudspeaker is designed specifically to match any of the m70i series
loudspeakers in home theatre installations to provide the centre ‘dialogue’ channel.
With slim styling and versatility of placement the m7c1 will grace any TV monitor or can be simply wall mounted
near the screen.
The m7c1 is fully shielded to ensure freedom from electromagnetic interference with TV and video monitors and
its smooth impedance characteristics make it an easy load, especially with AV receivers. Two low frequency
units add weight to the performance blending seamlessly with the sheer micro-fibre dome tweeter for
outstanding coherence and pin-point accuracy. The smoothly contoured baffle ensures good spatial dispersion,
minimising ‘hot seat’ effects, and the combination of wide bandwidth and superior dynamic range maximises
coherent reproduction of vital dialogue detail.
features benefits
High Impact ABS moulded baffle Excellent HF dispersion and low diffraction to improve
stereo imaging and create precise images in space.
High dB/watt efficiency Equivalent to extra power for amplifier — greater
dynamic range.
Sheer Micro-Fibre soft dome HF unit Ensures excellent high and low level resolution.
Neodymium HF unit magnet Improved microdynamics and reduced signal induced
demagnetisation effects.
Laser trimmed pressure balanced dome Improved dynamics and reduced time smear.
High-quality crossover components Silicon Steel inductors reduce level dependent
distortion.
Audiophile grade Polyester Capacitors increase detail
transmission.
Bonded woven glass composite LF cone Stiff and light ensuring good sensitivity with superb LF
response.
Pressure balanced, ventilated spider Improved dynamics and reduced time smear.
Magnetically shielded Suitable for all AV systems.
construction
Enclosure Mineral filled polypropylene
Baffle High Impact ABS
Ports Twin tuned port-tubes
Grille Acoustically transparent
Damping Acoustic long-hair fibre
electrical
L.F. Units Twin 110mm bonded woven glass composite cone with
H.F. Unit 25mm sheer Micro-Fibre soft dome with FF cooling.
Cross-Over Acoustic Second Order.
Terminals Gold-plated, multi-way binding posts.
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
25mm voice coil.
specifications
Enclosure type 2-Way Reflex Loaded
Frequency response ±3dB 75Hz to 20kHz
Nominal Impedance 8 Ohm compatible (min. 6.4 Ohms)
Sensitivity SPL/m/2.83v 87dB
Recommended amplifier power 25 — 100W
Crossover frequency 2.8kHz
Effective volume 5 Litres
Cabinet dimensions (HxWxD) 135 x 500 x 125 (mm)
Weight
Finish Charcoal and Satin Silver
setting up
• RUN IN for a minimum of 24 hours with music programme.
• Place on or under a TV monitor or wall mount near a screen.
• Maybe used with any competent budget electronics. Will clearly show improvements as
source improves.
Note: The recommended amplifier power rating is for undistorted power. Loudspeakers will be damaged by
amplifiers overdriven into distortion, no matter what the power rating of the amplifier. For larger rooms or high
listening levels it is safer to choose an amplifier with a power output near the maximum rating of the loudspeaker.
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
Loading...