Mission M-7-C-1 Brochure

PRODUCT INFORMATION GUIDE

Mission m7c1 Centre channel Loudspeaker

The Mission m7c1 centre channel loudspeaker is designed specifically to match any of the
m70 series loudspeakers in home theatre installations to provide the centre "dialogue"

channel. With its slim styling and versatility of placement the m7c1 will grace any TV monitor
or can be simply wall-mounted near a screen.
The m7c1 is fully shielded to ensure freedom from electromagnetic interference with TV and
video monitors and its smooth impedance characteristics make it an easy load, especially
with AV receivers. Two low frequency units add weight to the performance blending
seamlessly with the sheer micro-fibre dome tweeter for outstanding coherence and pin-point
accuracy. The smoothly contoured baffle ensures good spatial dispersion, minimising "hot
seat" effects, and the combination of wide bandwidth and superior dynamic range maximises
coherent reproduction of vital dialogue detail.

Construction

Enclosure Mineral filled polypropylene

Baffle High-impact ABS
Ports Twin tuned port-tubes
Grille Acoustically transparent
Damping Acoustic long-hair fibre

Electrical

L.F. Units Twin 110mm bonded woven glass composite cone with 25mm voice

coil
HF unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, multi-way binding posts

Specifications

Enclosure Type 2-Way Reflex Loaded

Frequency Response ± 3 dB 75Hz to 20kHz
Sensitivity SPL/m/2.83V 87 dB
Cross-Over Frequency 2.8 kHz
Effective Volume 5 Litres
Nominal Impedance 8 Ohm compatible (min. 6.4 Ohms)
Recommended amplifier power 25 - 100W
Cabinet Dimensions (H x W x D) 135 x 500 x 125 (mm)
Finish Graphite Black and Satin Silver

Features Benefits

High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
High dB/watt efficiency - equivalent to extra power for amplifier - greater dynamic range
Sheer Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
Laser trimmed pressure balanced dome - improved dynamics and reduced time smear
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Audiophile grade Polyester Capacitors increase detail transmission
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems

Setting Up

• RUN IN for a minimum of 24 hours with music programme

• Place on or under a TV monitor or wall mount near a screen.

• May be used with any competent budget electronics

Will clearly show improvements as source improves

PRELIMINARY INFORMATION