PRODUCT INFORMATION GUIDE
Mission m74 Loudspeaker
A large, two-way floor standing loudspeaker, the Mission m74 loudspeaker has a wide
frequency response with ultra-high efficiency and extensive power handling. The rigidly
braced cabinet produces amazingly extended, powerful bass with minimal cabinet
coloration while the curved, profiled front baffle offers outstanding imaging and
perspective. The sheer micro-fibre dome treble unit provides smooth well-integrated upper
midrange and treble and the whole speaker produces a performance of remarkable ease
and depth.
A tremendous value-for-money all round performer, the Mission m74 is ideal for both
music and home theatre installations.
Construction
Enclosure 19mm high density particle board
Baffle High rigidity 22mm MDF with high-impact ABS baffle moulding
Ports Anti-turbulence port tube with optional resistive loading
Grille Acoustically transparent
Damping Acoustic long-hair fibre
Electrical
L.F. Unit Twin 160mm bonded woven glass composite cones with 25mm
voice coils
HF unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, bi-wire multi-way binding posts
Specifications
Enclosure Type 2-Way Reflex Loaded
Frequency Response ± 3 dB 44Hz to 20kHz
Sensitivity SPL/m/2.83V 91 dB
Cross-Over Frequency 2.9 kHz
Effective Volume 40.5 Litres
Nominal Impedance 8 Ohm compatible (min. 4.8 Ohms)
Recommended amplifier power 25 - 150 W/Ch
Cabinet Dimensions (H x W x D) 950 x 200 x 325 (mm)
Finish Graphite Black and European Beech
Features Benefits
Unique IDG inverted driver geometry - smooth phase response throughout the cross-over region
Rigid, profiled MDF baffle - improved transient performance
High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
High dB/watt efficiency - equivalent to extra power for amplifier - greater dynamic range
Anti-turbulence port - clean, tight bass with optional resistive loading for room optimisation
Sheer Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
Laser trimmed pressure balanced dome - improved dynamics and reduced time smear
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Audiophile grade Polyester Capacitors increase detail transmission
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems
Setting Up
• RUN IN for a minimum of 24 hours with music programme
• Place 30 - 50cm from rear wall, smaller rooms need less distance
• Utilise optional resistive loading to optimise bass performance for wall-mount locations
• Ensure minimal toe-in is used, imaging will be impaired
• May be used with any competent budget electronics
Will clearly show improvements as source improves
PRELIMINARY INFORMATION
Loading...