Mission M-72-I Brochure

product information guide

m72i loudspeaker

For Mission’s new m70i series the ‘i’ stands for ‘improved’. Improved cabinet, improved crossover, improved
performance. Cabinet bracing has been revised to improve panel stiffness and reduce coloration, whilst crossover
redesign has resulted in improved bass performance, increased midrange dynamics and smoother treble detail.

The Mission m72i is a stand-mount loudspeaker with powerful bass, dynamically detailed midrange and clean,
crisp treble performance. Similar to the m71i but with a larger bass unit, greater efficiency and deeper bass
extension the Mission m72i is an outstandingly impressive loudspeaker, easy to drive and tolerant of a wide
range of amplifiers.

With its blend of small size and high power handling the m72i is ideal for music and compact home theatre
installations, where it can be partnered with the matching m7c1 centre channel, m7ds surround speakers and
m7as subwoofer.

features benefits

Unique IDG inverted driver geometry Smooth phase response throughout the cross-over

region.
Rigid, profiled MDF baffle Improved transient performance.
High Impact ABS moulded baffle Excellent HF dispersion and low diffraction to improve

stereo imaging and create precise images in space.
High dB/watt efficiency Equivalent to extra power amplifier — greater dynamic

range.
Anti-turbulence port Clean, tight bass with optional resistive loading for

room optimisation.
Sheer Micro-Fibre soft dome HF unit Ensures excellent high and low level resolution.
Neodymium HF unit magnet Improved microdynamics and reduced signal induced

demagnetisation effects.
High-quality crossover components Silicon steel inductors reduce level dependant

distortion.

Audiophile grade Polyester Capacitors increase detail

transmission.
Bonded woven glass composite LF cone Stiff and light ensuring good sensitivity with superb LF

response.
Pressure balanced, ventilated spider Improved dynamics and reduced time smear.
Magnetically shielded Suitable for all AV systems.

construction

Enclosure 19mm high density particle board with high rigidity MDF

Baffle High rigidity 22mm MDF with high-impact ABS baffle

Ports Anti-turbulence port tube with optional resistive

Grille Acoustically transparent.
Damping Acoustic long-hair fibre.

Phone: [phone] Fax: [phone] Web: www.mission.co.uk

Mission, Symphonix Limited, Huntingdon, PE29 6EY, England

Product designs and specifications subject to change without notice E & OE

Copyright Symphonix Limited 2002

bracing.

moulding.

loading.

Y

electrical

L.F. Unit 160mm bonded woven glass composite cone with

H.F. Unit 25mm sheer Micro-Fibre soft dome with FF cooling.
Cross-Over Acoustic Second Order.
Terminals Gold-plated, bi-wire multi-way binding posts.

specifications

Enclosure type 2-Way Reflex Loaded
Frequency response ±3dB 56Hz to 20kHz
Nominal Impedance 8 Ohm compatible (min. 4.0 Ohms)
Sensitivity SPL/m/2.83v 89dB
Recommended amplifier power 25-100 W/Ch
Crossover frequency 2.8kHz
Effective volume 12.5 Litres
Cabinet dimensions (HxWxD) 335 x 200 x 305 (mm)
Weight
Finish Graphite Black and European Beech

25mm voice coil.

setting up

• RUN IN for at least 24 hours with music programme before serious listening.

• Position within 10cm — 30cm of rear wall, smaller rooms need less distance.

• Utilise optional resistive loading to optimise bass performance for wall mount locations.

• Stand mount on a rigid Mission stand for optimum results.

• Ensure minimal toe-in is used, imaging will be impaired.

• May be used with any competent budget electronics. Will clearly show improvement

when source is improved.

Note: The recommended amplifier power rating is for undistorted power. Loudspeakers will be damaged by
amplifiers overdriven into distortion, no matter what the power rating of the amplifier. For larger rooms or high
listening levels it is safer to choose an amplifier with a power output near the maximum rating of the loudspeaker.

PE29 6E

Phone: [phone] Fax: [phone] Web: www.mission.co.uk

Mission, Symphonix Limited, Huntingdon, PE29 6EY, England

Product designs and specifications subject to change without notice E & OE

Copyright Symphonix Limited 2002