PRODUCT INFORMATION GUIDE
Mission m72 Loudspeaker
The Mission m72 is a stand-mount loudspeaker with powerful bass, dynamically detailed
midrange and clean, crisp treble performance. Similar to the m71 but with a larger bass
unit, greater efficiency and deeper bass extension the Mission m72 is an outstandingly
impressive loudspeaker, easy to drive and tolerant of a wide range of amplifiers.
With its blend of small size and high power handling the m72 is ideal for music and
compact home theatre installations, where it can be partnered with the matching m7c1
centre channel and m7ds surround speakers and m7as subwoofer.
Construction
Enclosure 19mm high density particle board
Baffle High rigidity 22mm MDF with high-impact ABS baffle moulding
Ports Anti-turbulence port tube with optional resistive loading
Grille Acoustically transparent
Damping Acoustic long-hair fibre
Electrical
L.F. Unit 160mm bonded woven glass composite cone with 25mm voice coil
HF unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, bi-wire multi-way binding posts
Specifications
Enclosure Type 2-Way Reflex Loaded
Frequency Response ± 3 dB 56Hz to 20kHz
Sensitivity SPL/m/2.83V 89 dB
Cross-Over Frequency 2.8 kHz
Effective Volume 12.5 Litres
Nominal Impedance 8 Ohm compatible (min. 4.0 Ohms)
Recommended amplifier power 25 - 100 W/Ch
Cabinet Dimensions (H x W x D) 335 x 200 x 305 (mm)
Finish Graphite Black and European Beech
Features Benefits
Unique IDG inverted driver geometry - smooth phase response throughout the cross-over region
Rigid, profiled MDF baffle - improved transient performance
High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
High dB/watt efficiency - equivalent to extra power for amplifier - greater dynamic range
Anti-turbulence port - clean, tight bass with optional resistive loading for room optimisation
Sheer Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
Laser trimmed pressure balanced dome - improved dynamics and reduced time smear
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Audiophile grade Polyester Capacitors increase detail transmission
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems
Setting Up
• RUN IN for a minimum of 24 hours with music programme
• Place within 10 - 30cm from rear wall, smaller rooms need less distance
• Utilise optional resistive loading to optimise bass performance for wall-mount locations
• Stand mount on a rigid Mission stand for optimum results
• Ensure minimal toe-in is used, imaging will be impaired
• May be used with any competent budget electronics
Will clearly show improvements as source improves
Loading...