product information guide
m71i loudspeaker
You might think that Mission’s m71 is a hard act to follow. Winner of a What Hi-Fi? Best Loudspeaker under £150
award, and awarded the prestigious Diapason D’Or in France, m71 had to be the budget speaker to beat. Yet
Mission have taken the m71 and simply made it better.
For Mission’s new m71
Cabinet bracing has been revised to improve panel stiffness and reduce coloration, whilst crossover redesign has
resulted in improved bass performance, increased midrange dynamics and smoother treble detail.
The Mission m71i is a compact loudspeaker suitable for stand or shelf mounting. Exhibiting a lively and highly
detailed mid-band, the m71i matches this to an astonishing low frequency performance seldom found in a
compact enclosure.
The m71i will find favour with listeners who have limited space but are not prepared to sacrifice low frequency
dynamics or musical enjoyment.
The combination of good bass reproduction, detailed transparent mid-band and silky-smooth treble output is
rare in small affordable speakers, making the m71i an outstanding speaker for music reproduction of the front
channels in a compact home theatre installation.
features benefits
Unique IDG inverted driver geometry Smooth phase response throughout the cross-over
Rigid, profiled MDF baffle Improved transient performance.
High Impact ABS moulded baffle Excellent HF dispersion and low diffraction to improve
High dB/watt efficiency Equivalent to extra power for amplifier — greater
Ant–turbulence port Clean, tight bass with optional resistive loading for
Sheer Micro-Fibre soft dome HF unit Ensures excellent high and low level resolution.
Neodymium HF unit magnet Improved microdynamics and reduced signal induced
Laser trimmed pressure balanced dome Improved dynamics and reduced time smear.
High-quality crossover components Silicon Steel inductors reduce level dependent
Bonded woven glass composite LF cone Stiff and light ensuring good sensitivity with superb LF
Pressure balanced, ventilated spider Improved dynamics and reduced time smear.
Magnetically shielded Suitable for all AV systems.
construction
Enclosure 15mm high density particle board and high rigidity MDF
Baffle High rigidity 18mm MDF with high-impact ABS baffle
Ports Anti-turbulence port tube with optional resistive loading
Grille Acoustically transparent
Damping Acoustic long-hair fibre
i
the ‘i’ stands for ‘improved’. Improved cabinet, improved crossover, improved performance.
region.
stereo imaging and create precise images in space.
dynamic range.
room optimisation.
demagnetisation effects.
distortion.
Audiophile grade Polyester Capacitors increase detail
transmission.
response.
bracing
moulding
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
electrical
Y
L.F. Unit 130mm bonded woven glass composite cone with
H.F. Unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, bi-wire multi-way binding posts
specifications
Enclosure type 2-Way Reflex Loaded
Frequency response ±3dB 65Hz to 20kHz
Nominal Impedance 8 Ohm compatible (min. 4.2 Ohms)
Sensitivity SPL/m/2.83v 88dB
Recommended amplifier power 25 — 75 W/Ch
Crossover frequency 2.8kHz
Effective volume 8.75 Litres
Cabinet dimensions (HxWxD) 296 x 170 x 275 (mm)
Weight
Finish Graphite Black and European Beech
25mm voice coil
setting up
• RUN IN for at minimum of 24 hours with music programme.
• Place within 10cm — 30cm from rear wall, smaller rooms need less distance.
• Utilise optional resistive loading to optimise bass performance for wall-mount locations.
• Stand mount on a rigid Mission stand for optimum results.
• Ensure minimal toe-in is used, imaging will be impaired.
• May be used with any competent budget electronics. Will clearly show improvements as
source improves.
Note: The recommended amplifier power rating is for undistorted power. Loudspeakers will be damaged by
amplifiers overdriven into distortion, no matter what the power rating of the amplifier. For larger rooms or high
listening levels it is safer to choose an amplifier with a power output near the maximum rating of the loudspeaker.
PE29 6E
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
Loading...