Page 1
PRODUCT INFORMATION GUIDE
Mission m71 Loudspeaker
The Mission m71 is a compact loudspeaker suitable for stand or shelf mounting.
Exhibiting a lively and highly detailed midband, the m71 matches this to an astonishing
low frequency performance seldom found in a compact enclosure. The m71 will find
favour with listeners who have limited space but are not prepared to sacrifice low
frequency dynamics or musical enjoyment.
The combination of good bass reproduction, detailed transparent midband and silkysmooth treble output is rare in small affordable speakers, making the m71 an outstanding
speaker for music reproduction or the front channels in a compact home theatre
installation.
Construction
Enclosure 15mm high density particle board
Baffle High rigidity 18mm MDF with high-impact ABS baffle moulding
Ports Anti-turbulence port tube with optional resistive loading
Grille Acoustically transparent
Damping Acoustic long-hair fibre
Electrical
L.F. Unit 130mm bonded woven glass composite cone with 25mm voice coil
HF unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, bi-wire multi-way binding posts
Specifications
Enclosure Type 2-Way Reflex Loaded
Frequency Response ± 3 dB 65Hz to 20kHz
Sensitivity SPL/m/2.83V 88 dB
Cross-Over Frequency 2.8 kHz
Effective Volume 8.75 Litres
Nominal Impedance 8 Ohm compatible (min. 4.2 Ohms)
Recommended amplifier power 25 - 75 W/Ch
Cabinet Dimensions (H x W x D) 296 x 170 x 275 (mm)
Finish Graphite Black and European Beech
Features Benefits
Unique IDG inverted driver geometry - smooth phase response throughout the cross-over region
Rigid, profiled MDF baffle - improved transient performance
High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
High dB/watt efficiency - equivalent to extra power for amplifier - greater dynamic range
Anti-turbulence port - clean, tight bass with optional resistive loading for room optimisation
Sheer Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
Laser trimmed pressure balanced dome - improved dynamics and reduced time smear
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Audiophile grade Polyester Capacitors increase detail transmission
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems
Page 2
Setting Up
• RUN IN for a minimum of 24 hours with music programme
• Place within 10 - 30cm from rear wall, smaller rooms need less distance
• Utilise optional resistive loading to optimise bass performance for wall-mount locations
• Stand mount on a rigid Mission stand for optimum results
• Ensure minimal toe-in is used, imaging will be impaired
• May be used with any competent budget electronics
Will clearly show improvements as source improves
Loading...