PRODUCT INFORMATION GUIDE
Mission m70 Loudspeaker
The Mission m70 is a bookshelf loudspeaker suitable for wall, shelf or stand mounting.
With a performance that belies its miniature size the m70 will prove immediately attractive
to listeners who have limited space but who require the bass performance and musical
enjoyment that typify Mission’s m70 series.
Easy to drive, the m70 is suitable for all types of amplification from separate hi-fi
amplifiers through to mini systems. Following the Mission tradition in bookshelf speakers,
the m70 exhibits a natural warmth and full bass with striking midrange detail that suits all
types of music.
Construction
Enclosure 15mm MDF
Baffle High density particle board with high-impact ABS baffle moulding
Ports Twin flared port tubes integral with the front baffle
Grille Acoustically transparent
Damping Acoustic long-hair fibre
Electrical
L.F. Unit 110mm bonded woven glass composite cone with 25mm voice coil
HF unit 21mm Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated multi-way binding posts
Specifications
Enclosure Type 2-Way Reflex Loaded
Frequency Response ± 3 dB 68Hz to 20kHz
Sensitivity SPL/m/2.83V 87 dB
Cross-Over Frequency 2.8 kHz
Effective Volume 4.5 Litres
Nominal Impedance 8 Ohm compatible (min. 4.2 Ohms)
Recommended amplifier power 15 - 75 W/Ch
Cabinet Dimensions (H x W x D) 245 x 150 x 230 (mm)
Finish Graphite Black, European Beech and Satin Silver
Features Benefits
Unique IDG inverted driver geometry - smooth phase response throughout the cross-over region
High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
Easy amplifier load - suits all classes of amplification
Twin reflex ports - low distortion bass extension
Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems
Setting Up
• RUN IN for a minimum of 24 hours with music programme
• Place within 10 - 30cm from rear wall, smaller rooms need less distance
• Stand mount on a rigid Mission stand for optimum results
• Ensure minimal toe-in is used, imaging will be impaired
• May be used with any competent budget electronics
Will clearly show improvements as source improves
Loading...