product information guide
m32 loudspeaker
The Mission m32 is a stand-mount loudspeaker ideally suited to the Mission Stancette stand. Similar to the m31 but
with a larger 165mm DiaDrive bass unit, the
performance. The curved profile to the 30mm thick front baffle optimises dispersion and provides a rigid frame for
the drive units in conjunction with the strongly braced 18mm MDF cabinet construction.
To match the outstanding performance of the new DiaDrive bass unit, a lightweight, Viotex fabric dome treble unit
handles high frequencies up to an ultrasonic 28kHz. The true analysis of this extended bandwidth can be found in
the sweetness, clarity and detail resolution that only comes from a drive unit that pushes distortion products beyond
the limits of audibility.
features benefits
DiaDrive Bass Unit Reveals the full energy of the music signal
Viotex fabric dome Treble Unit Fine detailing and extended bandwidth at HF
Curved baffle Adds strength and enhances dispersion
Anti-turbulence reflex port Low distortion bass extension
Long hair fibre damping Excellent balance between absorption and damping of
High quality crossover bass components Laminated Silicon Iron coils reduce level dependant
High quality crossover treble components Audiophile grade capacitors ensure HF clarity
Easy amplifier load Suits all types of amplification
Magnetically shielded Suitable for hi-fi stereo and AV use
IDG (Inverted Driver Geometry) Smooth phase response through the crossover region
m32 provides deeper bass extension and impressive midrange
internal cabinet energy
distortion
helps precision stereo imaging
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
construction
Enclosure 30 and 18mm MDF
Grille Acoustically transparent cloth
Damping Long hair fibre
electrical
L.F. Unit 165mm DiaDrive
H.F. Unit 25mm Viotex soft dome with FF cooling
Crossover Acoustic 2
nd
order
Terminals Gold plated Multi-way binding posts
specifications
Enclosure type 2-way reflex loaded
In-room Frequency Bandwidth -6dB at 48Hz and 28kHz
Frequency response ±3dB 52Hz — 20 kHz
Nominal Impedance
8 Ohms compatible (min. 4Ω)
Sensitivity SPL/m/2.83v 90dB
Recommended amplifier power 25 - 100W
Crossover frequency 2.8 kHz
Effective volume 12.4 litres
Cabinet dimensions (HxWxD) 320 x 200 x 325
(mm), 12.6 x 7.9 x 12.8 (inches)
Weight 7.0 Kg, 15.5 lbs. (per speaker cabinet)
Finish Graphite Black, Beech or Cherry
setting up
• RUN IN for at least 24 hours before serious listening.
• Use Mission Stance stands for optimum performance.
• Position within 20cm — 50cm of rear wall.
• Use good quality speaker cables.
Phone: +44 (0) 1480 423 700 Fax: +44 (0) 1480 423 701 Web: www.mission.co.uk
Mission, Symphonix Limited, Huntingdon, PE29 6EY, England
Product designs and specifications subject to change without notice E & OE
Copyright Symphonix Limited 2002
Loading...