The essentials of imaging
www.minoltaeuro
p
e.com
User Manual
EP1030/EP1030F
EP1030/EP1030F
Thank you for choosing Minolta.
This operator's manual explains how to operate the copier and replenish
its supplies. It also gives some troubleshooting tips as well as general
precautions to be observed when operating the copier.
Toensurethebestperformanceand effectiveuse ofyour copier,read this
manualcarefullyuntilyoufamiliarizeyourself thoroughlywith itsoperation
and features. After you have read through the manual, keep it for ready
reference.
Please use this manual as a quick and handy reference tool for
immediately clarifying any questions which may arise.
Description of Icons
CAUTION
Warning for dangerous situations
NOTE
Important informations for handling the copier
1, 2, ... COURSE OF ACTION
Sequence for a course of action
USEFUL TIP
Additional remarks
Rev. 1.x/22.05.02 Table of Contents 1 EP1030/1030F
1 Table of Contents
O Chapter 1 through 3 contain the basic information for making
copies. Be sure to read these chapters before attempting to use
your copier
1 Safety Notes
1.1 Installing the Copier........................2
1.1.1 InstallationSite......................................2
1.1.2 PowerSource.......................................2
1.1.3 SpaceRequirements .................................3
1.2 PrecautionsforUse........................4
1.2.1 OperatingEnvironment................................4
1.2.2 UsingtheCopierProperly..............................4
1.2.3 Moving ............................................5
1.2.4 CareofCopierSupplies...............................5
2 Before Making Copies
2.1 CopierPartsandtheirOperation.............8
OutsidetheCopier................................8
InsidetheCopier..................................9
Semi-automaticDocumentHandler(SDH).............10
2.2 ControlPanelanditsOperation.............11
2.2.1 Control Panel . . . ...................................11
2.2.2 ServiceIndicators...................................11
2.3 TurningON/OFFandInitialMode............12
2.3.1 TurningONandOFF................................12
2.3.2 WhentheCopierisTurnedON.........................12
2.3.3 InitalMode ........................................12
2.4 Convenient Functions . . ...................13
Clear/Stop......................................13
AutoReset .....................................13
AutoPowerOff..................................13
EP1030/1030F Table of Contents 2 Rev. 1.x/22.05.02
3 Making Copies
3.1 MakingCopies...........................16
3.2 PositioningtheOriginal...................18
3.2.1 PositioningontheGlass .............................18
PaperOriginals ................................. 18
TransparentOriginals.............................19
3.2.2 UsingtheSemi-automaticDocumentHandler(SDH)....... 19
GuidelinesforOriginals........................... 19
PositioningtheOriginal ...........................20
3.3 SettingtheNumberofCopies..............21
SettingtheNumberofCopies...................... 21
3.4 SettingImageDensity.....................22
AutoExposureMode.............................22
ManualExposureMode...........................23
3.5 ManualBypassCopying...................24
GuidelinesforMultiBypassPaper...................24
MakingaSingleCopy ............................24
3.6 HintsforAdvancedCopying...............25
Two-SidedCopying..............................25
CompositeCopying..............................26
4 Special Functions
4.1 TonerReplenisher........................28
TonerReplenisherFunction........................ 28
4.2 DrumDehumidifier.......................30
Drum Dehumidifier Function ....................... 30
4.3 User’sChoice ...........................31
User’sChoiceItem...............................31
Rev. 1.x/22.05.02 Table of Contents 3 EP1030/1030F
User's Choice Function and Explanation of S ettings . . . . . 31
U-1AutoResetMode............................. 31
MakingUser'sChoiceSelections.................... 32
4.4 Default Manual Exposure Level Adjustment . . .34
4.5 Default Auto Exposure Level Adjustment . . . . .36
4.6 TotalCountFunction......................38
TotalCount.....................................38
IUCount.......................................38
4.6.1 Counter Display . ...................................38
CheckingTotalCopies/IUCount.....................38
5 Error Messages and Indicators
5.1 IdentifyingandCorrectingProblems.........40
5.2 PC-Display ..............................41
ReplenishingPaper...............................41
RemovingaPaperMisfeed.........................42
5.3 A AddTonerIndicator.....................43
ReplacingtheTonerCartridge......................43
Toner Replenishing...............................45
5.4 B ImagingUnitIndicator...................46
HandlingCautionsforImagingUnit ..................46
RemovingtheImagingUnit.........................47
Installing the Imaging Unit..........................48
5.5 E-Display................................53
ResettingtheCopier..............................53
Before Calling Your Service Representative. . ..........53
5.6 J-Display................................55
Paper Misfeed...................................55
5.6.1 RemovingaPaperMisfeed............................56
J2/J3-Copier....................................56
J8 - Semi-automatic Document Handler (SDH) . . . ......58
5.7 C-Display................................60
ResettingtheCopier..............................60
Before Calling Your Service Representative. . ..........60
EP1030/1030F Table of Contents 4 Rev. 1.x/22.05.02
6 Troubleshooting
6.1 WhenThisTypeofCopyisProduced........62
6.2 CopierDoesNotWorkProperly.............64
7 Miscellaneous
7.1 CopierSpecifications.....................64
7.2 DailyMaintenance........................66
7.2.1 Cleaning: Before cleaning, always make sure the
Main Switch for the copier has been turned off. ........... 66
OuterCover.................................... 66
ControlPanel................................... 66
OriginalCoverPad...............................66
OriginalGlass...................................67
InsideofFrontDoor.............................. 67
SDHPad ...................................... 67
7.3 PaperSize ..............................68
7.4 Index...................................74
Rev. 1.x/22.05.02 Table of Contents 5 EP1030/1030F
EP1030/1030F Table of Contents 6 Rev. 1.x/22.05.02
1 Safety Notes
O Thischapter explainsabout theoperating environment, conditions
and restrictions.
1 Safety Notes
1.1 Installing the Copier .......................2
1.1.1 InstallationSite ..................................... 2
1.1.2 PowerSource ...................................... 2
1.1.3 Space Requirements .................................3
1.2 Precautions for Use .......................4
1.2.1 OperatingEnvironment...............................4
Chapter 1
1.2.2 Using the Copier Properly . ............................ 4
1.2.3 Moving............................................5
1.2.4 CareofCopierSupplies...............................5
Rev. 1.x/22.05.02 1 EP1030/EP1030F
1.1 Installing the Copier
1.1 Installing the Copier
1.1.1 Installation Site
To ensure utmostsafety and prevent possible malfunctionsof the copier,
install it in a location which meets the following requirements.
A place away from a curtain or the like that may catch fire and burn
easily.
An area where there is no possibility of being splashed with water or
other types of liquid.
An area free from direct sunlight.
A place out of the direct air stream of an air conditioner, heater, or
ventilator.
A well-ventilated place.
A dry place.
A dust-free location.
An area not subject to undue vibration.
A stable and level location.
A place where ammonia or other organic gas is not generated.
Aplacewhichdoes notput theoperator inthe directstreamofexhaust
from the copier.
A place which is not near any kind of heating device.
1.1.2 Power Source
The power source voltage requirements are as follows.
Use a power source with little voltage fluctuation.
Voltage Fluctuation: Within ±10%
Frequency Fluctuation: Within ±0.3%
EP1030/EP1030F 2 Rev. 1.x/22.05.02
1.1 Installing the Copier
1.1.3 Space Requirements
To ensure easy copier operation, supply replacements and service
maintenance, adhere to the recommended space requirements detailed
below.
* Be sureto allow a clearanceof150mm (6 inch)or more at the backof
the copier as there is a ventilation duct.
EP1030F (with Semi-automatic Document Handler)
Unit: mm (inch)
867 (34 1/4)
660 (26)
101 (4)
559 (22)
207
(8 1/4)
Chapter 1
804 (31 3/4)
304 (12) 500 (19 3/4)
87°
694 (27 1/4)
357 (14)
281 (11)
49 (2)
237
(9 1/4)
EP 1030 (with Original Cover)
Unit: mm (inch)
867 (34 1/4)
660 (26)
101 (4)
559 (22)
207
(8 1/4)
237
(9 1/4)
849 (33 1/2)
304 (12) 545 (21 1/2)
105°
647 (25 1/2)
303 (12)
281 (11)
94(3 3/4)
Rev. 1.x/22.05.02 3 EP1030/EP1030F
1.2 Precautions for Use
1.2 Precautions for Use
1.2.1 Operating Environment
The operating environmental requirements for the copier are as follows.
Temperature:
10°C to30°C(50°F to 86°F) witha fluctuation of 10°C(50°F) per hour.
Humidity:
15% to 85% with a fluctuation of 20% per hour.
1.2.2 Using the Copier Properly
To ensure the optimumperformance of the copier,followthe precautions
listed below.
NEVER place a heavy object on the copier or subject the copier to
shocks.
NEVER open any doors, or turn OFF the copier while the copier is
making copies.
NEVER bring any magnetized object or use flammable sprays near
the copier.
ALWAYS insert the power plug all the way into the outlet.
ALWAYS make sure that the outlet is visible, clear of the copier or
copier cabinet.
ALWAYS provide good ventilation when making a large number of
continuous copies.
NOTE
Locate the Copier in a Well Ventilated Room
A negligible amountof ozone isgenerated duringnormal operation of this
copier.An unpleasant odormay, however,be created in poorlyventilated
roomsduringextensive copieroperations.Fora comfortable,healthy,and
safe operating environment, it is recommended that the room be well
ventilated.
REMARQUE
Placer le copieur dans une pièce largement ventilée
Une quantitéd'ozone négligable est dégagée pendantle fonctionnement
du copieur quandcelui-ciest utilisé normalement. Cependant, une odeur
désagréable peut être ressentie dans les pièces dont l'aération est
insuffisante et lorsque une utilisation prolongée du copieur est effectuée.
Pouravoir lacertitude detravailler dansunenvironnementréunissant des
conditions de confort, santé et de sécurité, il est préférable de bien aérer
la pièce ou se trouve le copieur.
EP1030/EP1030F 4 Rev. 1.x/22.05.02
1.2 Precautions for Use
1.2.3 Moving
If you need to transport the copier over a l ong distance, consult your
Technical Representative.
1.2.4 Care of Copier Supplies
Use the following precautions when handling the copier supplies (toner,
paper, etc.)
Store the paper, toner, and other supplies in a place free from direct
sunlight and away from any heating apparatus. Keep them in a dry,
clean environment.
Storepaper,whichhas beenremoved fromitswrapperbutnot loaded
into the drawer, in a sealed plastic bag in a cool, dark place.
Keep supplies out of the reach of children.
If your hands become soiled with toner, wash them with soap and
water immediately.
Chapter 1
Rev. 1.x/22.05.02 5 EP1030/EP1030F
1.2 Precautions for Use
EP1030/EP1030F 6 Rev. 1.x/22.05.02
2 Before Making Copies
O This chapter gives you a brief description of the system and
preliminary information about the different parts of the system.
2 Before Making Copies
2.1 CopierPartsandtheirOperation.............8
OutsidetheCopier................................ 8
InsidetheCopier................................. 9
Semi-automaticDocumentHandler(SDH) ............ 10
2.2 ControlPanelanditsOperation ............11
2.2.1 ControlPanel......................................11
2.2.2 ServiceIndicators .................................. 11
2.3 TurningON/OFFandInitialMode ...........12
2.3.1 TurningONandOFF................................ 12
Chapter 2
2.3.2 WhentheCopierisTurnedON........................ 12
2.3.3 InitalMode........................................ 12
2.4 ConvenientFunctions.....................13
Clear/Stop..................................... 13
AutoReset.....................................13
AutoPowerOff.................................. 13
Rev. 1.x/22.05.02 7 EP1030/EP1030F
2.1 Copier Parts and their Operation
2.1 Copier Parts and their Operation
Outside the Copier
2
1
3
4
5
7
6
Pos. Specification Description
1 Copy Tray Holds the copies fed out of the copier.
2 Main Switch Use to turn on and off the copier.
(See page 12.)
3 Control Panel Use to make various copy job settings and
start a copy cycle.(See page 11.)
4 Front Door Open only for the following:
Replenish toner (See page 43.)
Remove a paper misfeed (See page 56.)
5 Manual Bypass Tray Single sheet of plain paper, thick paper,
transparencies and other special materials
can be placed here. (See page 24.)
6 Right Door Open to clear a paper misfeed.
7 Drawer Holds up to 250 sheets of copy paper.
EP1030/EP1030F 8 Rev. 1.x/22.05.02
Inside the Copier
2.1 Copier Parts and their Operation
3
2
1
Pos. Specification Description
1 Imaging Unit Lock
Release Button
Use when removing the imaging unit.
(See page 47.)
2 Fusing Unit Cover Hold onto this cover when lifting the Upper
Unit of the Fusing Unit.
3 Lock Release Lever Turn clockwise to swing up the Upper Unit of
the copier to clear a paper misfeed.
Chapter 2
Rev. 1.x/22.05.02 9 EP1030/EP1030F
2.1 Copier Parts and their Operation
Semi-automatic Document Handler (SDH)
3
2
4
5
6
1
Pos. Specification Description
1 Document Guide
Adjust to the size of the original.
Plates
2 Misfeed Removal
Open to clear a paper misfeed.
Guide
3 Document Exit Tray Receives originals that are automatically
ejected after copying.
4 Document Feed Tray Load the originals face down on this tray.
(See page 20.)
5 Document Feed Tray
Extender
6 Misfeed Removal
Can be pulled out when using large size
originals.
Turn to remove an original misfeed.
Knob
NOTE
EP1030 has an original cover.
EP1030F has an SDH for original handling.
EP1030/EP1030F 10 Rev. 1.x/22.05.02
2.2 Control Panel and its Operation
2.2 Control Panel and its Operation
2.2.1 Control Panel
123
45
Pos. Specification Description
1 Display Panel Alphanumeric display indicating the number
of copies and other information.
(See page 21.)
Chapter 2
2 Clear/Stop Key Returns the copy setting to one (1). Stops
3 Start Key Starts the copying operation
4 Copy Quantity Keys Used to set the number of copies to be
5 Exposure Control
Keys
2.2.2 Service Indicators
Pos. Specification Description
1 Add Toner Indicator A
the copying operation.
made. The number in the display panel will
increase by one each time the one (1) key is
pressedandincreasebyteneachtimethe
ten (10) key is pressed. (See page 21.)
46:
Controls the density of the copy image.
5:
For selecting the Auto Exposure/Manual
Exposure Mode. (See page 22.)
Indicates that toner is running out.
(See page 43.)
2 Imaging Unit
Indicator
Rev. 1.x/22.05.02 11 EP1030/EP1030F
B
Indicates when the imaging unit needs
replacement. (See page 46.)
2.3 Turning ON/OFF and Initial Mode
2.3 Turning ON/OFF and Initial Mode
2.3.1 Turning ON and OFF
1
If thecopier hasnot beenusedin thepast30 minutes,the Auto PowerOff
function turns the copier off. (See page 13.)
2.3.2 When the Copier is Turned ON
The LED in the start key will remain off while the copier makes
preparations for copying. After approximately 10 seconds, theLEDinthe
start key will come on and copying can be started. At this time, if an
original is placed in the Semi-automatic Document Handler (SDH), the
copier will be set into SDH mode copying.
Turning Copier ON. Press the
Main Switch to the e (ON)
position.
Turning Copier OFF. Press the
Main Switch to the d (OFF)
position.
NOTE
2.3.3 Inital Mode
The copy mode will be displayed on the control panel when the Main
Switch is turned on. This is called the initial mode. This is the mode that
forms the basis for all control operations.
Number of Copies: 1
Copy Density: Auto Exposure
EP1030/EP1030F 12 Rev. 1.x/22.05.02
2.4 Convenient Functions
Clear/Stop Key
Pressing the Clear/Stop Key returns the copy quantity to its initial
setting (1).
USEFUL TIP
While using the Semi-automatic Document Handler (SDH mode),the
copy quantity setting remains at "1".
The density does not return to its initial setting when the Clear/Stop
Keyispressed.
Auto Reset
One minute after the last copy has been made or any key has been
operated, this function will clear all settings and restore the initial mode
automatically.
2.4 Convenient Functions
Chapter 2
USEFUL TIP
The timing for this function can be set within a range from 30 seconds to
four minutes. This setting can also be disabled.
Refer to "User's Choice" on page 31.
Auto Power Off
In order to save energy, the copier will be automatically turned off after a
presetperiod of timehas passedsince thelast copywasmade. Theinitial
setting for this period of time is 30 minutes.
USEFUL TIP
The timing for this function can be set within a range from 10 to 120
minutes. This setting can also be disabled. Please ask your service
technician for details.
Rev. 1.x/22.05.02 13 EP1030/EP1030F
2.4 Convenient Functions
EP1030/EP1030F 14 Rev. 1.x/22.05.02
3MakingCopies
O Thischapter explainshow to makecopies. By reading thischapter
you will be able to understand the operation of the copier and fully
utilize its many functions.
3 Making Copies
3.1 MakingCopies...........................16
3.2 PositioningtheOriginal...................18
3.2.1 PositioningontheGlass .............................18
PaperOriginals ................................. 18
TransparentOriginals.............................19
3.2.2 UsingtheSemi-automaticDocumentHandler(SDH)....... 19
GuidelinesforOriginals........................... 19
Chapter 3
PositioningtheOriginal ...........................20
3.3 SettingtheNumberofCopies..............21
SettingtheNumberofCopies...................... 21
3.4 SettingImageDensity.....................22
AutoExposureMode.............................22
ManualExposureMode...........................23
3.5 ManualBypassCopying...................24
GuidelinesforMultiBypassPaper...................24
MakingaSingleCopy ............................24
3.6 HintsforAdvancedCopying...............25
Two-SidedCopying..............................25
CompositeCopying..............................26
Rev. 1.x/22.05.02 15 EP1030/EP1030F
3.1 Making Copies
3.1 Making Copies
The basic copy made is one that is the same size (100%) as the original.
In this procedure, the copyispositioned (Step 1),thenumber of copies is
set(Step 3),the StartKeyis pressed(Step 4)and acopy ismade thathas
the same size of paper as the original.
* (In the initial mode, auto exposure has already been selected.)
The section shown by the arrow shows how and when to make
adjustments to the image density of the copy.
1
2
Position the original.
Open the cover and place the
original face down on the glass.
(See page 18.)
[Onlyfor unitsequipped withthe
Semi-automatic Document
Handler (SDH)]
Place the original in the SDH.
(See page 19.)
3
EP1030/EP1030F 16 Rev. 1.x/22.05.02
To change image density
Use the Exposure Control Keys
46 to adjust image density.
(See page 22.)
3.1 Making Copies
4
5
Set the number of copies to be
made.
Use the Copy Quantity keys to
set the number of copies to be
made. (See page 21.)
* If theoriginalhas beenplacedin
the Semi-automatic Document
Handler (SDH), the display will
automatically show the
number "1".
* To clear a wrong setting, press
the Clear/Stop Key and then
make the setting once again.
Press the Start Key.
Press the start key and copying
will begin.
* Press the Clear/Stop Key to
interrupt continuous
copying.Copying will
automatically stop.
Chapter 3
Rev. 1.x/22.05.02 17 EP1030/EP1030F
Loading...