Minolta 43 Service manual

MULTIFUNCTION

bizhub 43

TECHNICAL DOCUMENT

253 363 295 - B

KONICA MINOLTA

3000 359 745 - 02 - 2 -

- 3 - 3000 359 746 - 02

REFERENCE

DESCRIPTIVE NOTICE 3000 329 392 - 03

INSTALLATION GUIDE 3000 361 032 - 01

MAINTENANCE GUIDE 3000 329 394 - 03

ILLUSTRATED PART LIST 3000 361 031 - 01

PERSONNALISATION HFFV2 BIZHUB 43 3000 348 280 - 02

PRINTER TECHNICAL DOCUMENT 3000 329 397 - 01

3000 359 746 - 02 - 4 -

DOCUMENT EVOLUTION

Date Indice Action Author Requested by

20/09/10 A Initial creation C.C. A. Cruchant 18/10/10 B Evolution C.C. A. Cruchant

- 1 - DN 3000329392 - 03

DESCRIPTION

CONTENTS

1 GENERAL INFORMATION 2

1.1 PRESENTATION 2

1.2 G

2 CHARACTERISTICS 4

2.1 P

2.2 G

3 FUNCTIONING 10

3.1 M

3.2 HFFV2 LCD PANEL TOP EQUIPPED SUB ASSEMBLY 21

3.3 HFFV2 KEYPAD SUB ASSEMBLY 24

3.3.1 Keypad board 25

3.3.2 Keypad Mezzanine board 27

4 POWER SUPPLY 28 5 CRYSTALS 29 6RESET 29 7 STANDBY MODE 30

ENERAL DESCRIPTION 3

HYSICAL CHARACTERISTICS 4

ENERAL TECHNICAL CHARACTERISTICS 4

AINBOARD 11

DN 3000329392 - 03 - 2 -

1. GENERAL INFORMATION

1.1 P

RESENTATION

1 Sheet feeder scanner (ADF) 13 Paper tray 2 2 Adjustable paper guide 14 Toner cartridge access button 3 Automatic document feeder 15 Chip card reader 4 Original document output tray 16 Touch screen 5 Paper stop 17 Access handle for the flatbed scanner 6 Finger print reader 18 Power cord connection 7 Numerical keypad 19 LINE 1 socket- phone cord Connection 8 Master USB connector (USB key) 20 LINE 2 socket- phone cord Connection

(according to model)

9 - Printer output tray

- Access door to the toner cartridges 10 Paper stop 22 Slave USB connector (for PC) 11 Main paper tray 23 Duplex module 12 On/Off switch

21 LAN connector

- 3 - DN 3000329392 - 03

1.2 GENERAL DESCRIPTION

These terminals are part of a range of multifunction office equipment. The product consist of a colour scanner with a 600 dpi resolution and a black and white printer with

1200 dpi resolution. The documents to be processed are read by means of a sheet feeder scanner using CCD sensor

technology via the ADF (Automatic Document Feeder) or via the exposition window for bulky documents.

The control panel comprises:

• a 7-inch colour graphic display equipped with a touch screen that allows users to view the command or alert messages and control the terminal,

• a row of terminal function and command keys.

The keyboard part comprises:

• a numerical keyboard,

• a finger print reader that allows user authentication for restricted functions or secured printing (a row of LEDs that visually invite users to log in, with the finger print).

• a USB connector.

The chip card reader allow to validate consumables and to back up of user functions (directory content and user settings)

DN 3000329392 - 03 - 4 -

2. CHARACTERISTICS

2.1 P

Environment

• Operating :

- The machine should not be exposed to

- Power supply: 220-240 V - 50/60 Hz - 6 A.

- Power consumption, standby 25 W.

- Power consumption, printing 800 W

- Temperature: 10 °C to 32 °C.

- Temperature changes: ≤10 °C/hour.

- Humidity: 15 % to 85 % (RH non-con

- Humidity changes: ≤20 %/hour.

HYSICAL CHARACTERISTICS

direct sunlight.

(1300 W max).

densing).

•Storage: Multifunction :

- Temperature: -20 °C to 40 °C.

- Temperature changes: ≤10 °C/hour.

Consumables (toner cartridge) :

- Normal temperature: 0 to 40 °C.

- Humidity: 30 % to 85 % (RH non-con densing).

Maximum storage time: 18 months

2.2 GENERAL TECHNICAL CHARACTERISTICS

General Dimensions (width x depth x height in mm., without

trays) Weight (kg) 36 Consumables Reference Paper (RP) Type Technostar

Reference Document (RD) Type ISO/IEC19752 Resolution Normal mode (200 x 100 DPI) ADF Scanner Type CCD Colour Colour analysis Yes Resolution in dpi 600

505x571x684

A4 - 80 g/m

- 5 - DN 3000329392 - 03

Grey scale 16 bits Colour scale 48 bits (3 x 16)/pixel Paper size

• Maximum width Letter

• Maximum length A4

Paper weight

60 to 105 g/m

Capacity of document loading tray 70 sheets Acquisition time for black and white document

• 600 x 100 DPI 43 ppm

• 600 x 200 DPI 43 ppm

• 600 x 300 DPI 24 ppm

Acquisition time for color document

• 600 x 100 DPI 39 ppm

• 600 x 200 DPI 22,4 ppm

• 600 x 300 DPI 11,8 ppm Effective scanner width in mm 206 Zoom in steps of 1% 25 % to 400 % Contrast adjustment Yes Brightness adjustment Yes Margin adjustment (left/right) Yes Duplex scan Yes Flatbed Scanner Type CCD Colour Colour analysis Yes Black & White resolution in dpi 600 x 600 Colour resolution in dpi 600 x 600 Grey scale 16 bits Colour scale 48 bits (3 x 16)/pixel Window size 220 mm x 300 mm Paper size

• Maximum width Letter

• Maximum length A4 Zoom in steps of 1% 25 % to 400 % Contrast adjustment Yes Brightness adjustment Yes Printer Type Laser Black&White Resolution in Dpi 1200 B&W printing speed 43 PPM (A4) / 45 PPM (Letter) Paper size in mm A4 (210 x 297) Capacity of the first input tray (in RP) 150 sheets Capacity of the second input tray (in RP) 550 sheets Capacity of the output tray (in RP) 500 sheets First page printed after 7,9 s

DN 3000329392 - 03 - 6 -

Printing area 4 mm margins

A4 : 208 x 289 mm

Letter : 208 x 271 mm Duplex unit Yes PaperSave in Printing Yes Optional paper tray (2 max) Option Consumables management By smart card Fonts list Can be printed by menu

"Report", "Fonts". Fax-Modem Type PSTN-Super G3 Maximum speed in bps (V34Fax) 33 600 V34Fax capabilities in bps 33 600 to 2 400

• Incrementation in bps 2 400 V17 capacity in bps 14 400, 12 000, 9 600, 7 200 V29 Fax capacity in bps 9 600, 7 200 V27ter capacity in bpsTypeType 4 800, 2 400 Automatic fall back Yes Data-Modem Type PSTN-V34 Maximum speed in bps (V34) 33 600 V90 capabilities No

• V90 increments No V34plus capabilities in bps 33 600 to 2 400

• V34plus increments in bps 2 400 V32bis capabilities in bps 14 400, 12 000, 9 600, 7 200 V32 capabilities in bps 9 600, 4 800 V22bis capabilities in bps 2 400 V22 capabilities in bps 1 200, 600 Automatic fall back Yes Fax communication Type PSTN, ITU T30, G3 Max speed 33 600bps (V34Fax) Coding scheme MH, MR, MMR,

JBIG(1st line only), JPEG (LAB,

4:1:1) ECM (Error Correction Mode) T30 ECM Sending type Memory Delayed sending Yes B&W Transmission speed (for RD) 2.5s Sending header adding Yes (programmable) Reception header adding Yes (programmable) Full duplex scan Yes Transmission speed adjustment Yes Reception speed adjustment Yes Transmission report with reduced 1st page Yes (programmable)

- 7 - DN 3000329392 - 03

Only one report for broadcast-list Yes (programmable) ECO PSTN sending No ECO period 0 On-hook dialling No Reception without paper Yes (programmable) Multiple copying of received Fax Yes (1 to 99 copies) Deposit (for subscriber's polling) No Multiple deposit (for several subscribers) No Polling No Fax TAD No Confidential TAD reception No Remote TAD polling No Confidential Mailbox No Confidentiality via password No Deposit in a mailbox No Sending into a mailbox No Reception into a mailbox No Mailbox reception report No Polling a mailbox No Remote broadcast demand No Remote broadcast performs No Remote broadcast reception report with reduced 1st page No

Echo Protection Yes (programmable) Adding echo Protector Tone in V29 Yes (programmable) Rings number before answering Programmable (1 to 5) Dialling type DTMF Fax forwarding Yes Fax Memory forwarding (once) No Maximum received page width 216 mm Maximum received page length 1 m Internet access Type PSTN-V34 Maximum speed in bps (V34Fax) 33 600 Modem error correction mode V42, MNP4 Data compression V42bis, MNP5 Modem transmission rate adjustment Yes ISP subcriptions 1 ISP access protocol PPP

• ISP access security PAP & CHAP-MD5C Internet protocol TCP/IP DNS Queries Yes (2 DNS servers access) LAN Access Type Ethernet 10/100 base T Plug and Play configuration DHCP & BOOTP Internet protocol TCP/IP DNS 2 DNS servers access

DN 3000329392 - 03 - 8 -

WINS 2 servers access NetBIOS compatibility yes (2 names) SNTP compatibility Yes Embedded Web Server Yes Network scanner Scan To E-Mail Yes (SMTP) Scan To FTP Yes (FTP) Scan To Disk Yes (SMB) B&W Format PDF, TIFF, secured PDF (v1.1) Colour Format PDF, JPEG, secured PDF (v1.1) E-Mail and fax communication Compatibility ITU T37 Mail Protocol : sending SMTP Mail Protocol : polling POP3 Mail format MIME

• Charset US-ASCII

• Encoding 7 bits, base 64, quoted-printable Keyboard and Screen Keyboard 64 QWERTY 62 or 64 keys Screen Colour graphics

7 lines of 20 characters

8 icons LED two-colour green/orange Address List Capacity 500 Type Name/PSTN and

SMS number/E-mail Transmission list 32 Transmission list capacity 499 Alphabetical typing Yes Associated key No Directory import/export Email (CSV format) Directory server access yes (LDAP V3) Mass-storage USB KeyToPrint (stand-alone) JPEG (single, index), PDF (1.4),

Tiff, Txt KeyToDisplay JPEG ScanToKey B&W/Colour,

Tiff, JPEG, PDF Multicopy 1-99 Copier Copie Modes Fast/Text/Photo/Mixt ADF Scan Resolution (HxV) dpi 600x300 / 600x600 / 600x300 /

600x600 Output resolution (HxV) dpi 300x300 / 600x600 / 600x600 /

600x600

- 9 - DN 3000329392 - 03

Speed (multicopy) cpm 35 / 24 / 35 / 24 cpm First copy- time from multipages 6 / 16/ 15 / 16 s FB Scan Resolution (HxV) dpi 600x600 / 600x600 / 600x600 /

600x600 Output resolution (HxV) dpi 300x300 / 600x600 / 600x600 /

600x600 First copy- time (s) 6 / 18 / 18 / 18 s Zoom 25%-400% Automatic Duplex Mode (Recto/verso) Yes Manual Duplex Mode (Recto/verso) No Multicopy 1-99

DN 3000329392 - 03 - 10 -

3. FUNCTIONING

The equipment is a Group 3 multifunction fax functioning in accordance with the UIT-T T30 recommendation.

It consists of a black and white laser printer, a CCD (Charge Coupled Device) colour ADF scanner, a colour flatbed scanner, a front panel with a graphic colour screen equipped with a touchscreen and command keys (refer to the User Guide for a more complete description of the front panels).

It allows the following operations to be carried out:

• B&W Fax transmission and reception on the switched telephone network using the V34 protocol (max. 33.6 kbits/s) and the V17 protocol (max. 14.4 kbits/s),

• Internet e-mail transmission on the switched telephone network using the V34 protocol,

• B&W photocopying,

• Local printer via a USB interface PC connection,

• Network printer and scanner, via a local area network (LAN),

• E-mail transmission and reception on the local area network,

• Securised printer with data storage in hard disk,

• Pictures, pdf files printing from USB key. Direct scan on USB key.

Remark(s): The machine does not have any facilities for managing an external telephone answering

machine connected on the same line (with a stackable plug). It is preferable to use a dedicated phone line for multi-function use.

The machine’s electronics is made up of:

- CPU board with hard disk,

- front panel board,

- keyboard ,

- mezzanine board with finger print sensor,

- networking board in the scanner module,

- chip card reader board,

- two USB board.

For the printer part, refer to the printer section. The power supply is provided by a power supply board that is located in the printer part.

Remark(s): (for technicians).The LAN interface conform to the SELV (very low safety voltage)

safety level. The telephone line input conforms to the TRT3 safety level.

Before performing any intervention on the CPU board, disconnect the phone lead.

Before performing any intervention on the CPU electronic circuit board or the mezzanine board, it is also preferable to:

- 11 - DN 30003293 92 - 03

• Set the main switches to the OFF position,

• Disconnect all external interconnect leads (LAN, PTSN, USB),

• Disconnect the mains lead.

3.1 MAINBOARD

The CPU board is based on the ZORAN 4230 circuit which performs in particular the function of microprocessor.

The executable code is stored in the flash memory Z1101. This flash memory is divided in two zones: a zone reserved for the storage of the code and a zone

reserved for the storage of the documents. The code is loaded from this flash memory into DDR2-SDRAM, and the microprocessor executes its

instructions from the DDR2-SDRAM. Before printing, the documents to be printed are stored as bitmaps in DDR2-SDRAM. The DDR2-SDRAM is also used as the working memory for the ZORAN 4230.

DN 3000329392 - 03 - 12 -

Electronic architecture diagram :

ELECTRONIC SYNOPTIC

HFx Keyboard

HFFv2

MFP Back

LCD-TFT

Touch screen

Finger

Control

Panel-

Keypad

Timing

generator

PIC

L V D S

Chip Card

PRIMAX B3 Digital

2 CCFL

AFE 3-

CCD

TOSHIBA

TCD2914BFG

ADF

motor

channels

LM98714

CCFL

inverter

V D S

ADF motor

FB motor

sensor

PC HS

RX/TX

"CC" UART

7814

LVDS receiver

LVDS output

LVDS clock

CCFL-Power

(18V/24V)

Home / STSC / Cover / PSF sensors

(National semi.)

CCFL

Motors Drivers

L6258

Motors Drivers

L6219

L V D S

DS90CR218A DS90CV011A

PSU

LCD Ctrl

Motor DC/DC

supply (36v)

24V

System bus

Power-down

system

bus

GPIO

SPI

Scanner

GPIO

Main processor

Scanner

GPIO

USB

Device

SPI

DDR IF

system bus

(8 bits data)

UART

PRN IF

HS USB

Host

Power-down

E2prom

(25LC080)

SPI2

DDRII bus

System bus

Port3

USB2.0-Hub

Cy7C65620B

(quartz 24Mhz,

Ext_reset)

Port1

RTC

Eeprom

(on holder)

DDR2

SDRAM

Flash

(Main Reset)

UART

Tranceiver

WIFI module (option)

Port2

Battery+

Quartz

DDR2

SDRAM

module

Printer

USB Key

Jigen 45

keyboard

MFP Back

RJ45 (with

transformer)

RJ11

Line

Interface

Line

Interface

Ethernet

PHY

2nd modem line

AFE

HP driver

AFE SL

Modem Data

Pump

DP3V34

Modem Data

Pump

DP3V34

ETH

System bus

MAC

system bus (8 bits data)

USB2.0-SATA

Bridge

Oxu931S

(quartz 25Mhz,

Ext_Reset)

HDD

SATA

Architecture module :

- 13 - DN 30003293 92 - 03

DN 3000329392 - 03 - 14 -

Diagram of the Connector and Sensor Locations :

Power supply

cable

CCD cable

motor

ADF

motor

sensor

P7102

SATA

P4400 P4401

P7103

P5300

MAINBOARD UC

P2100

Extension

memory board

(OPTION)

P5120P5200

P1301

RJ45

P1202

P4340

P3270

P4302

P4000

P4100

Front panel USB

Smart card cable

Front panel cable

WIFI

USB Device

Ethernet

Mechanical

engine

cable

P6100

P1300 Mezz modem

Mezzanine modem

RJ11

P1420

Modem

List of connectors :

Connector Part

number

Number

Type Position

points

Smart card P1202 6 Male Straight Loudspeaker P1301 2 Male Straight PSTN P1420 4 External type, RJ11 Extension memory P2100 144 Male Right angled connector for

plug in board Front panel P3270 20 Male Straight LAN P4100 8 External type, RJ45 USB WIFI P4302 Male Straight USB Front panel P4340 5 Male Straight SATA Signal P4400 7 Male Straight SATA connector SATA Power P4401 4 Male Straight ADF Motor & sensor P5120 20 Male Straight FB Motor P5200 6 Male Straight CCD P5300 28 Male Straight Power supply P7103 5 Male Straight Power supply P7102 2 Male Straight Mezz modem P1300 26 Female Straight Engine Mechanical P6100 26 Female Straight

• P1202 : Smart Card interface

- 15 - DN 30003293 92 - 03

Pin Signal name Input /

Description

output

1 CCAP_DETECT I Smart card insertion detect 2 CCAP_RESET* O Smart card reset 3 CCAP_CLK O Smart card clock 4 GND - Ground 5 CCAP_VCC O Smart card power command 6 CCAP_DIO I/O Smart card data

• P1301 : Loudspeaker

Pin Signal name Input /

Description

output

1 HP+ O LF differential signal to loudspeaker 2 HP- O LF differential signal to loudspeaker

• P1420 : PSTN

Pin Signal name Input /

Description

output

1NC 2 R1F I/O L1 local feedback 3 L1 I/O PSTN signal 4 L2 I/O PSTN signal 5 R2F I/O L2 local feedback 6NC -

• P3270 : Interface with Front panel

Pin Signal name Input /

Description

output

1 Int_pic I PIC controller interrupt signal 2 GND - Ground 3 Spi_do O SPI serial line – data output 4 GND - Ground 5 Spi_di I SPI serial line – data input 6 Spi_pic_cs* O SPI serial line – PIC select 7 Spi_clk O SPI serial line – clock 8 Spi_fgpr* O SPI serial line – Finger print select

9 GND - Ground 10 GND - Ground 11 VCC - +5V Power supply 12 P24V - CCFL +24V Power supply 13 P3V3 - +3,3V Power supply

DN 3000329392 - 03 - 16 -

14 GND - Ground 15 GND - Ground 16 GND - Ground 17 Lvds_cko+ O LVDS (Twisted wires) video clock 18 Lvds_cko- O 19 Lvds_dso+ O LVDS (Twisted wires) video data 20 Lvds_dso- O LVDS (Twisted wires) video data

• P4100 : LAN

Pin Signal name Input /

Description

output

1 TX+ O Differential pair emitted on network

2 TX- O Differential pair emitted on network

3NC -

4 GND - Ground

5 GND - Ground

6NC -

7 RX+ I Differential pair received on network

8 RX- I Differential pair received on network

9 VDDA33 - LED Anode Power supply 10 ACTIVITY/PHYAD2 - ACTIVITY Yellow LED 11 LINK/PHYAD1 - LINK Green LED 12 VDDA33 - LED Anode Power supply

• P4302 : Interface with USB Wifi

Pin Signal name Input /

Description

output

1 USB_FRONT_HSH_V

O +5V Power supplied by the master

bus 2 USB_FRONT_HSH_M I/O Differential pair 3 USB_FRONT_HSH_P I/O Differential pair 4 GND - Ground 5 GND - Ground

• P4340 : Interface with USB Front panel

Pin Signal name Input /

output

1 USB_FRONT_HSH_V

O +5V Power supplied by the master

bus 2 USB_FRONT_HSH_M I/O Differential pair 3 USB_FRONT_HSH_P I/O Differential pair 4 GND - Ground 5 GND - Ground

Description

• P4400 : SATA DATA to HDD

- 17 - DN 30003293 92 - 03

Pin Signal name Input /

Description

output

1 GND - Ground 2 SATA_TX+ O SATA differential emitted data 3 SATA_TX- O SATA differential emitted data 4 GND - Ground 5 SATA_RX- I SATA differential received data 6 SATA_RX+ I SATA differential received data 7 GND - Ground

• P4401 : SATA Power supply to HDD

Pin Signal name Input /

Description

output

1 GND - Ground 2 VCC - +5V power supply 3 VCC - +5V power supply 4 GND - Ground

• P5120 : ADF motor and Sensor cable

Pin Signal name Input /

Description

output

1 ADF_OUT2A O ADF phase 2A motor drive 2 ADF_OUT1B O ADF phase 1B motor drive 3 ADF_OUT2B O ADF phase 2B motor drive 4 ADF_OUT1A O ADF phase 1A motor drive 5 ADF_DETMOT I Detection from the ADF motor type 6 GND - Ground 7 Zen Cube FAN O Zen Cube FAN motor drive 8NC -

9 Sensor_PW - Sensor +5V power supply 10 GND - Ground 11 STSC* I STSC sensor input 12 GND - Ground 13 Sensor_PW - Sensor +5V power supply 14 NC 15 OUVCAPOT I ADF OPEN COVER sensor input 16 GND - Ground 17 Sensor_PW - Sensor +5V power supply 18 NC 19 PSF* I PSF sensor input 20 GND - Ground

DN 3000329392 - 03 - 18 -

• P5200 : Flat Bed motor cable

Pin Signal name Input /

Description

output

1 FB_OUT2B O Flat Bed phase 2B motor drive

2 FB_OUT2A O Flat Bed phase 2A motor drive

3 FB_OUT1B O Flat Bed phase 1B motor drive

4 FB_OUT1A O Flat Bed phase 1A motor drive

5 FB_DETMOT I Flat Bed motor type detection

6 GND - Ground

• P5300 : Interface with CCD Module

Pin Signal name Input /

Description

output

1 CCFL_PWR - +18V / +24V CCFL power supply

2 P12VP - +12V Power supply

3 INV_GND - Ground

4 AGND - Ground

5 P3V3 - +3,3V Power supply

6 VCC - +5V Power supply

7 HOME I “Home” sensor input

8 RESET_CCD O Reset CCD module

9 SH_R O Sample Hold request 10 DGND - Ground 11 DGND - Ground 12 SPI_SDIO I/O SPI serial line – Data 13 SPI_SCLK O SPI serial line - Clock 14 SPI_SEN O SPI serial line - Enable 15 DGND - Ground 16 DGND - Ground 17 LVDS_TXOUT0m I LVDS signal 18 LVDS_TXOUT0p I LVDS signal 19 LVDS_TXOUT1m I LVDS signal 20 LVDS_TXOUT1p I LVDS signal 21 LVDS_TXOUT2m I LVDS signal 22 LVDS_TXOUT2p I LVDS signal 23 LVDS_FRAMEm I LVDS signal 24 LVDS_FRAMEp I LVDS signal 25 DGND - Ground 26 DGND - Ground 27 LVDS_CLOCKp O LVDS signal – clock output 28 LVDS_CLOCKm O LVDS signal – clock output

• P7102 : Power supply connector

- 19 - DN 30003293 92 - 03

Pin Signal name Input /

Description

output

1 GND - Ground

2 P24V - +24V Power supply

• P7103 : Power supply connector

Pin Signal name Input /

Description

output

1 GND - Ground

2 P3V3 - +3V3 Power supply

3 GND - Ground

4 P24V - +24V Power supply

5-Not used

• P1300 : Mezzanine 2nd line modem

Pin Signal name Input /

Description

output

1 P3V3 - +3V3 power supply

2 CS_MEZZ* O Chip select

3 WR* O Write enable

4 RD* O Read enable

5 Reset_Mezz* O Reset

6 IT_Mezz I Interruption

7 GND - Ground

8 Data7 I/O Data bus

9 Data6 I/O Data bus 10 Data5 I/O Data bus 11 Data4 I/O Data bus 12 Data3 I/O Data bus 13 Data2 I/O Data bus 14 Data1 I/O Data bus 15 Data0 I/O Data bus 16 GND - Ground 17 BA<0> O Adresse 0 18 BA<1> O Adresse 1 19 BA<2> O Adresse 2 20 BA<3> O Adresse 3 21 BA<4> O Adresse 4 22 GND - Ground 23 IMD_Therm I

DN 3000329392 - 03 - 20 -

24 GND - Ground 25 SPK_MEZZ O Speaker mezzanine 26 GND - Ground

• P6100 : Printer interface

Pin Signal name Input /

Description

output

1 HFF_VDATA<1> I/O Data bus

2 GND - Ground

3 HFF_VDATA<0> I/O Data bus

4 GND - Ground

5 HFF_VMREF I +3.3V

6 HFF_SLP* O Sleep Command

7 - - No connect

8 GND - Ground

9 HFF_BD* I Beam Detect 10 GND - Ground 11 HFF_PPRDY* I Printer Power Ready 12 HFF_RDY* I Printer Ready 13 HFF_TOP I Top Page Detection 14 HFF_SBSY I Status Busy 15 HFF_STA* I Status from printer 16 - - No connect 17 GND - Ground 18 HFF_CBSY* O Command Busy 19 HFF_START* O Print Start 20 HFF_CPRDY* O Controler Power Ready 21 HFF_CMD* O Command from UC 22 HFF_CCLK* O Serial Clock 23 HFF_PRFD* O Prefeed Signal

24 25 26

GND - Ground

- - No connect

GND - Ground

- 21 - DN 30003293 92 - 03

3.2 HFFV2 LCD PANEL TOP EQUIPPED SUB ASSEMBLY

The “HFFv2 LCD PANEL TOP EQUIPPED” is a Front panel Sub assembly, done to be managed and tested independently.

The “HFFv2 LCD PANEL TOP EQUIPPED” is done from:

• The HFxV2 Front panel board

• A 7 inch LCD panel with integrated touch screen

• 2 plastic covers

• HFFv2 Front panel keys

DESCRIPTION

The front panel board manages the following functions:

• Keypad and LEDs for Front panel touch,

• Video conversion to drive an Analog 7 inch LCD panel,

• Touch Screen function,

• LCD panel inverter,

• Finger print, which is putted in a mezzanine.

The Front panel board integrates a PIC controller (with integrated flash), to manage the following functions:

• Touch screen management,

• Keypad from Front panel board and Keypad board,

• Leds from Front panel and drive the shift register for Finger print on Keypad board,

• Drive the LCD panel inverter . The PIC controller is driven from the Mainboard UC through an SPI serial line. Diagram of the Connector Locations

Inverter for LCD

panel

P302

Touch screen

from LCD panel

P301

To LCD panel

P101

To Mainboard

To Keypad

module

DN 3000329392 - 03 - 22 -

List of connectors :

Connector Part

number

Number

Sexe Position

points

Mainboard P1 20 Male Straight

Keypad P4 22 Male Straight

LCD panel video P101 26 Female Right angled

LCD panel’s Touch

P301 4 Female Right angled

screen

LCD panel Inverter P302 2 Male Right angled

• P1 : Interface with Mainboard

Pin Signal name Input /

Description

output

1 Int_pic O PIC controller interrupt signal 2 GND - Ground 3 Spi_di I SPI serial line – data input 4 GND - Ground 5 Spi_do O SPI serial line – data output 6 Spi_pic_cs* I SPI serial line – PIC select 7 Spi_clk I SPI serial line – clock 8 Spi_fgpr* O SPI serial line – Finger print select 9 GND - Ground

10 GND - Ground 11 VCC - +5V Power supply 12 P24V - CCFL +24V Power supply 13 P3V3 - +3,3V Power supply 14 GND - Ground 15 GND - Ground 16 GND - Ground 17 Lvds_cko+ I LVDS (Twisted wires) video clock 18 Lvds_cko- I 19 Lvds_dso+ I LVDS (Twisted wires) video data 20 Lvds_dso- I LVDS (Twisted wires) video data

This is an external connector for the module Front panel

• P4 : Keypad interface from Front Panel

Pin Signal name Input /

Description

output

1 GND - Ground 2 Spi_do O SPI serial line – data output 3 Spi_di I SPI serial line – data input 4 Spi_clk O SPI serial line – clock 5 Spi_fgpr* O SPI serial line – Finger print select 6 fs_intr* I Finger print interrupt

- 23 - DN 30003293 92 - 03

7 GND - Ground 8 GND - Ground 9 Key_L2 O Drive Keypad line 2

10 Key_L3 O Drive Keypad line 3 11 Key_C1 O Drive Keypad column 1 12 Key_C2 O Drive Keypad column 2 13 Key_C3 O Drive Keypad column 3 14 Key_C4 O Drive Keypad column 4 15 Key_C5 O Drive Keypad column 5 16 Key_C6 O Drive Keypad column 6 17 Led_CLK O Clock for shift register – driving blue leds 18 GND - Ground 19 P3V3 - +3,3V Power supply 20 VCC - +5V Power supply 21 Led_data O Data for shift register – driving blue leds 22 Led_oe O Output enable for shift register – driving

blue leds

This is an external connector for the module Front panel

• P101 : 7 inch LCD panel video interface

Pin Signal name Input /

Description

output

1 GND - Ground for logic circuit 2 VCC - +5V power supply 3 VGL O Negative power for scan driver 4 VGH O Positive power for scan driver 5 STVR O Vertical start pulse 6 STVL O Vertical start pulse 7 CKV O Shift clock input for scan driver 8 UDC O UP/DOWN scan control input 9 OEV O Output enable input for scan driver

10 VCOM - Common electrode driving signal 11 VCOM - Common electrode driving signal 12 LRC O LEFT/RIGHT scan control input 13 MOD O Analog signal rotate input 14 OEH O Output enable input for data driver 15 STHL O Start pulse for horizontal scan line 16 STHR O Start pulse for horizontal scan line 17 CPH3 O Sampling and shifting clock pulse for data

driver

18 CPH2 O Sampling and shifting clock pulse for data

driver

19 CHP1 O Sampling and shifting clock pulse for data

driver

20 VCC - +5V Supply voltage of logic control circuit

DN 3000329392 - 03 - 24 -

21 GND - Ground for logic circuit 22 VR O Alternated video signal input (Red) 23 VG O Alternated video signal input (Green) 24 VB O Alternated video signal input (Blue) 25 AVDD - +5V Supply voltage for analog circuit 26 GND - Ground for analog circuit

P301 : Touch screen interface for LCD panel

Pin Signal name Input /

Description

output

1 X- I Touch screen horizontal feedback 2 Y- I Touch screen vertical feedback 3 X+ I/O Touch screen horizontal drive & feedback 4 Y+ I/O Touch screen vertical drive & feedback

• P302 : LCD panel inverter

Pin Signal name Input /

Description

output

1 HV O High Voltage drive 2 LV - Inverter ground and feedback (High Voltage)

BE CAREFUL : The Inverter generates AC High Voltage. To handle with care.

Attention - The “HFFv2 LCD PANEL TOP EQUIPPED” integrates a touch screen panel, that

need to be calibrated. The calibration data are stored in the Mainboard Eeprom. In case of replacement from the Front panel Sub assembly, the touch screen panel calibration have to be performed

3.3 HFFV2 KEYPAD SUB ASSEMBLY

The “HFFV2 Keypad W/FP Reader Equipped” is a Keypad sub-assembly, done to be managed and tested independently.

The “HFFV2 Keypad W/FP Reader Equipped” is done from:

• The HFxv2 Keypad board

• The HFxv2 Keypad Mezzanine board

• One plastic cover and 2 light guides

• HFFv2 Keypad ASM

• One metal part

- 25 - DN 30003293 92 - 03

3.3.1 KEYPAD BOARD The Keypad board manages the following functions:

- 12 Digital Keypad touches,

- LEDs for Finger print sensor light guide,

- Connector to Keypad Mezzanine PCBA.

Diagram of the Connector Locations

P301

To Keypad

mezzanine board

To Front panel

module

P320

List of connectors :

Connector Part

number

Number

Type Position

points

Keypad mezzanine P301 20 Male Straight

Front panel P320 22 Female Right angled

• P301 : Mezzanine Keypad interface

Pin Signal name Input / output Description

1 GND - Ground 2 GND - Ground 3NC 4 P3V3 - +3,3V power supply 5 P3V3 - +3,3V power supply 6 GND - Ground 7 GND - Ground 8 FS_SCS* O Finger sensor serial line - Chip select 9 FS_SCLK O Finger sensor serial line - Clock

10 FS_MISO I Finger sensor serial line - Data In 11 FS_MOSI O Finger sensor serial line - Data Out 12 GND - Ground 13 FS_INTR* I Finger sensor serial line - Interrupt 14 GND - Ground 15 GND - Ground 16 P3V3 - +3,3V power supply

DN 3000329392 - 03 - 26 -

17 P3V3 - +3,3V power supply 18 NC 19 GND - Ground 20 GND - Ground

• P320 : Front panel interface from Keypad

Pin Signal name Input /

Description

output

1 GND - Ground 2 FS_MISO O SPI serial line – data output 3 FS_MOSI I SPI serial line – data input 4 FS_SCK I SPI serial line – clock 5 FS_SCS* I SPI serial line – Finger print select 6 FS_INTR* I Finger print interrupt 7 GND - Ground 8 Key_L2 I Drive Keypad line 2 9 Key_L3 I Drive Keypad line 3

10 Key_C1 I Drive Keypad column 1 11 Key_C2 I Drive Keypad column 2 12 Key_C3 I Drive Keypad column 3 13 Key_C4 I Drive Keypad column 4 14 Key_C5 I Drive Keypad column 5 15 Key_C6 I Drive Keypad column 6 16 GND - Ground 17 LED_CLK I Clock for shift register – driving blue leds 18 LED_DATA I Data for shift register – driving blue leds 19 LED_OE I Output enable for shift register – driving

blue leds 20 GND - Ground 21 P3V3 - +3,3V power supply 22 VCC - +5V Power supply

This is an external connector for the module Front panel

+ 202 hidden pages