Minolta 330 User Manual

+ Service ++ Service ++ Service ++ Service ++ Service ++ Service ++ Service ++ Servic e++ Service +

+

®

magicolor

330

Large-Capacity Input Feeder

Parts Manual

November 2000

1750049- 006A

Parts List Contents

1 Using the Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Optional Feeder I (PL20.1 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Optional Feeder II (PL21.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 Optional Feeder III ( PL22.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5 Optional Feeder IV (PL22.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1

2

1 Using the Parts List

1. The numbers shown in ea ch illustration co rres pond to the parts list numb er for that illustration.

2. Throughout th is manual, parts are identif ied by the prefix “PL”, followed by a number, a decimal point, and
another number. For example, PL3.12 means the part is item 12 of Parts List 3.

3. The capital letters “C”, “E”, “KL”, and “S” shown in an illustration stand for C-ring, E-ring, Clamp, and
Screw, respectively.

4. A shaded triangl ▼ in an illustration indicates the item is part of an assembly.

5. The notation “
through Y. For example, “1 (with 2~4)” means part 1 consists of pa rt 2, part 3, and part 4.

6. The symbol
stocked and readily available. Other parts may be stocked according to the needs of each individual OEM
client.

7. An asteri sk

8. The notation “
to one end of the wire harne s s and connector jack 2 is attached to the other end that is plugged into plug 2.

with X~Y

$ following a p art name in dicates th e par t is an FX Recommen ded Part and is constantly

*

following a part name indicates the page contains a note about this part.

J1<>J2 and P2

” following an part name indicates an ass embly tha t is made up of components X

” is attached to a wire har ness. It indicates that conn ector jack 1 is attached

3