Milton CAT Z45-25J RT User Manual

-5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft

-1.52 m 0 m 1.52 m 3.05 m 4.57 m 6.10 m 7.62 m

55 ft

16.76 m

50 ft

15.24 m

45 ft

13.72 m

40 ft

12.19 m

35 ft

10.67 m

30 ft

9.14 m

25 ft

7.62 m

20 ft

6.10 m

15 ft

4.57 m

10 ft

3.05 m

5 ft

1.52 m

0 ft

0 m

SELF-PROPELLED ARTICULATING BOOMS

-5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft

-1.52 m 0 m 1.52 m 3.05 m 4.57 m 6.10 m 7.62 m

55 ft

16.76 m

50 ft

15.24 m

45 ft

13.72 m

40 ft

12.19 m

35 ft

10.67 m

30 ft

9.14 m

25 ft

7.62 m

20 ft

6.10 m

15 ft

4.57 m

10 ft

3.05 m

5 ft

1.52 m

0 ft

0 m

ZTM-45/25 RT & ZTM-45/25J RT

Specifications

G

MODELS ZTM-45/25 RT ZTM-45/25J RT

MEASUREMENTS US Metric US Metric

Working height maximum* 51 ft 11 in 16.00 m 52 ft 2 in 16.07 m
Platform height maximum 45 ft 11 in 14.00 m 46 ft 2 in 14.07 m
Horizontal reach maximum 25 ft 7.62 m 25 ft 1 in 7.65 m
Up and over clearance maximum 23 ft 6 in 7.16 m 23 ft 6 in 7.16 m

A

Platform length 2 ft 6 in .76 m 2 ft 6 in .76 m

B

Platform width 6 ft 1.83 m 6 ft 1.83 m

C

Height - stowed 6 ft 11 in 2.11 m 6 ft 11 in 2.11 m

D

Length - stowed 18 ft 3 in 5.56 m 22 ft 5 in 6.83 m

E

Width 7 ft 6 in 2.29 m 7 ft 6 in 2.29 m

F

Wheelbase 6 ft 8 in 2.03 m 6 ft 8 in 2.03 m

G

Ground clearance - center 1 ft 3.5 in .39 m 1 ft 3.5 in .39 m

PRODUCTIVITY

Lift capacity 500 lbs 227 kg 500 lbs 227 kg
Platform rotation 180° 160°
Vertical Jib rotation — 135°
Turntable rotation 355° non-continuous 355° non-continuous
Turntable tailswing zero zero
Drive speed - stowed 5.0 mph 8.0 km/h 5.0 mph 8.0 km/h
Drive speed - raised ** 0.68 mph 1.1 km/h 0.61 mph 1.0 km/h
Gradeability - 2WD - stowed*** 30% 30%
Gradeability - 4WD - stowed*** 45% 45%
Turning radius - inside 5 ft 6 in 1.70 m 5 ft 6 in 1.70 m
Turning radius - outside 14 ft 9 in 4.50 m 14 ft 9 in 4.50 m
Controls 12 V DC proportional 12 V DC proportional
Tires 355/55 D625 355/55 D625

POWER

Power source Ford DSG-423 4 cylinder gas/LPG 75 hp (56 kW)
Deutz diesel D2011L03i 3 cylinder diesel 48 hp (35.8 kW)
Perkins diesel 404-D22 4 cylinder diesel 51 hp (38 kW)

Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 24 gal 90.8 L 24 gal 90.8 L
Fuel tank capacity 17 gal 64.4 L 17 gal 64.4 L

WEIGHT****

2WD 13,675 lbs 6,203 kg 14,300 lbs 6,486 kg
4WD 13,875 lbs 6,294 kg 14,500 lbs 6,577 kg

STANDARDS COMPLIANCE

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.

www.genieindustries.com

RANGE OF MOTION ZTM-45/25 RT

A

E

E

D

C

F

B

D

C

G

F

A

B

RANGE OF MOTION ZTM-45/25J RT

ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10

Features

EASILY CONFIGURED TO MEET

YOUR NEEDS

PLATFORM OPTIONS

• Steel 6 ft (1.83 m) (standard)

• Steel 4 or 5 ft (1.22 or 1.52 m)

• Steel 6 ft (1.83 m) tri-entry**

JIB OPTIONS

• Non-jib

• 5 ft (1.52 m) jib boom

POWER OPTIONS

• Ford gas/LPG 75 hp (56 kW)

• Deutz diesel 48 hp (35.8 kW)

• Perkins diesel 51 hp (38 kW)

DRIVE OPTIONS

• 2WD

• 4WD

AXLE OPTIONS

• Active oscillation (standard on 4WD)

• Non-oscillating

TIRE OPTIONS

• Rough terrain air-filled (standard)

• Rough terrain foam-filled

• Rough terrain non-marking
(air or foam-filled)

• High flotation

• Sealant treated air-filled

* Reduces platform capacity to 440 lbs
** Not available on CE machines

SELF-PROPELLED ARTICULATING BOOMS

ZTM-45/25 RT & ZTM-45/25J RT

STANDARD FEATURES

MEASUREMENTS

Z™-45/25 RT

• 51 ft 11 in (16.00 m) working height

• 25 ft (7.62 m) horizontal reach

• 23 ft 6 in (7.16 m) up and over
clearance

• Up to 500 lb (227 kg) lift capacity

Z™-45/25J RT

• 52 ft 2 in (16.07 m) working height

• 25 ft 1 in (7.65 m) horizontal reach

• 23 ft 6 in (7.16 m) up and over clearance

• Up to 500 lb (227 kg) lift capacity

PRODUCTIVITY

• Self-leveling platform

• Hydraulic platform rotation

• Fully proportional controls

• Drive enable

• AC power cord to platform

• Horn

• Hour meter

• Tilt alarm

• Descent alarm

• 355° non-continuous turntable rotation

• Positive traction drive

• Two speed wheel motors

POWER

• All engines are emissions compliant

• 12 V DC auxiliary power

• Engine protection package

• Deutz intake air heater

• Swing out engine tray

OPTIONS & ACCESSORIES

PRODUCTIVITY

• Platform swing gate

• Half mesh platform inserts with swing gate

• Platform top auxiliary rail

• Air line to platform

• Thumb rocker steer

• Fire resistant hydraulic oil

• Biodegradable hydraulic oil

• Standard aircraft protection package*

• Deluxe aircraft protection package*

• Basic hostile environment kit

• Tool tray

• Fluorescent tube caddy

• Pipe cradle (pair)

• Alarm package

• Panel cradle package

• Platform work lights

• Front driving lights

• Lockable platform control box cover

• Tow package

POWER

• Engine gauge package

• AC generator packages (110V/60Hz,
3000W or 220V/50Hz, 2500W

• Cold Weather Packages

• Arctic Packages

• Diesel scrubber/spark arrestor muffler

• Diesel spark arrestor muffler

• LPG tank 33.5 lb (15.19 kg) capacity

• Additional LPG tank with carrier

• Retained key selector switch

Genie United States

18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730

Telephone
Toll Free in USA/Canada [phone]
Fax [phone]

Effective Date: July, 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual
for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to
our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex
Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex® is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie® is a
Registered Trademark of Genie Industries, Inc. in the U.S.A. and many other countries. Genie is a Terex Company. © 2008 Terex Corporation.

Z45RT 3.5K 0708M. Part No. 109362

[phone]

Genie Europe

Millennium House
Brunel Drive
Newark NG24 2DE
UK

Telephone
Fax [phone]

Email: [e-mail]

[phone]

Distributed By:

www.genieindustries.com