Milton CAT W430 User Manual

W430

ROAD WIDENER

SIMPLE. PROVEN. POWERFUL.

WEILER W430 ROAD WIDENER

A SIMPLE DESIGN BASED ON THE PROVEN W730 AND W530,

HELPS PAVE THE WAY TO SUCCESS.

HIGH-TEMPERATURE-RESISTANT BELT COUPLED WITH A POWERFUL DRIVE ENSURES TOP MATERIAL HANDLING.

le-speed h

An independent v
wide conveyor belt at speeds ranging from 0 to 400 fpm. Discharge speed is controlled by the conveyor speed knob, and discharge direction is
controlled by a switch, both conveniently located on the operator’s station.

The large-capacity receiving hopper has a 9-foot, 4-inch opening with an optional h
styles. The chain-driven belt provides a positive drive and keeps the belt tracking straight in line.

This heavy-duty, self-propelled road widener is designed to handle a variety of widening applications and materials. It is capable of widening
up to 8 feet with a working depth from 12 inches above grade to 12 inches below grade.

ariab

ydraulic, dual end-drive system–complete with two high-torque direct-drive motors–powers the 24-inch

ydraulic push beam that pro

vides flexibility for multiple truck

SLIDING CONTROL CONSOLE ENHANCES
OPERATOR EASE OF USE

Operators have convenient right or left-side access to all
machine controls needed for pa
tilt for operator-comfort.

ving. The control panel can

STANDARD CHAIN DRIVEN CONVEYOR

Positive chain drive ensures that your belt will stay in
position and not slip even under the heaviest loads.

HEAVY DUTY TOOLS

The W430 has the same heavy duty tools as its larger

t, giving it the tallest tools in its class. The blades

counter
are mounted behind the front tire allowing for a large spoil
pile and surge capacity.

-par

ADJUSTABLE PUSH BEAM MAKES IT EASIER
TO UNLOAD A VARIETY OF TRUCKS

The W430 has a standard manually adjustable push beam
and optional hydraulic controls that are operated from the
operators station to extend the push beam up to 14 inches.

HIGHEST HORSEPOWER IN ITS CLASS
ALLOWS FOR HIGHER PRODUCTIVITY

With its Cat C3.4 Tier III 83 horse power engine the
W430 has plenty of power to push trucks as well as
provide a transport speed of 11 mph.

OPTIONAL REAR STEER PROVIDES
MAXIMUM MANEUVERABILITY

The optional rear
allow for corrections while operating or loading it on a truck.
It also boasts an 8’ inside turning radius.

-wheel steering axle has manual controls to

WEILER W430 ROAD WIDENER SPECIFICATIONS

W

eight 18,500 Lbs.

Opt. Rear Weight 1715 Lbs. each

Engine Cat 83 hp Tier III

Height 95"

Length 228"

Transport Width 120"

Wheel Base 117"

Inside Turning Radius 13' Std. 8' w/opt rear steer

Hydraulic Drive Front Wheel Hydrostatic

2-speed motor

2-speed gearbox

Steering 2-wheel std.

4-wheel opt.

Transport Speed 11 MPH

Working Speeds 0-650 fpm

0-274 fpm

0-135 fpm

Tires 2-425/65R22.5 front

2-11R22.5 rear

Fuel Tank Capacity 64 Gal

Hydraulic Oil Capacity 52 Gal

Conveyor Belt Drive Chain drive on both ends

Conveyor Belt Speed 0-400 fpm

Working Depth 12" Above and below grade

Strike Off Tools 25" Tall

Std 1', 2', 3'

Optional 6' and 2-3' telescoping tool

Lights

Standard flashing lights
and brake lights

Weiler reserves the right to make changes in engineering, design, and specif ications, and to make improvements at any time without notice or obligation.

eiler is a premier w

W

815 Newbold Drive

Kno

Phone: [phone]

Fax: [phone]

www.weilerproducts.com

hole product contract manuf

TOOLS CARRIED ON THE SIDE AND STILL
MAINTAINS A 10 FOOT SHIPPING WIDTH

The tools are stored simply by pivoting them beside the
machine and in most tool configurations, the shipping
width is within 10 feet.

OPTIONAL FEATURES

• Additional Operator’s seat

• 9 KW Generator

• LED Strobe

• Weight kits

• Wash-down system

• Opposite side mount and hydraulics

• Work lights

• Rear steer

• Broom

• Remote strike-off controls

• 2’ - 3’ telescoping or adjustable tool
telescoping tool

- 7’

• 4’

Weiler

x 289

. Bo

.O

P

xville, IA 50138

acturing provider and prototype development resource center.