Milton CAT TL943 User Manual

Specifications

®

Cat

TL943

Telehandler

Engine

Model Cat® 3054C DIT
Gross Power (Basic) 74 kW 99 hp
Net Power (Basic) 70.4 kW 94.5 hp

• Net Power shown is the power available at the flywheel
when equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight 11 814 kg 26,050 lb

Operating Specifications

Rated Load Capacity 4082 kg 9,000 lb
Maximum Lift Height 13.1 m 43 ft
Maximum Forward Reach 9.6 m 31.5 ft
Frame Leveling 10°
Top Travel Speed 28.3 kph 17.6 mph
Capacity at Max Height 3175 kg 7,000 lb
Capacity at Max Reach 544 kg 1,200 lb
Turning Radius over Tires 3.7 m 12 ft

Hydraulic System — Implement

Gear Pump Tandem
System Operating Pressure 276 bar 4,000 psi
Auxiliary Hydraulic Pressure 207 bar 3,000 psi
Auxiliary Hydraulic Flow 38 L/min 10 gal/min

at Boom Head

• Auxiliary Hydraulic Circuit used for all attachments equipped
with cylinders or other hydraulic components. Consists of valves,
controls and hydraulic lines.

Service Refill Capacities

Fuel Tank 144 L 38 gal
Hydraulic System 151.4 L 40 gal

Tires

Standard 13.00 x 24-12 PR
Optional 13.00 x 24 Foam Filled

13.00 x 24 Rock Lug

13.00 x 24 Solid

Transmission Speeds

Forward 4 speed
Reverse 3 speed

Boom Performance

Boom Up 11.8 Seconds
Boom Down 9.1 Seconds
Tele In 12.9 Seconds
Tele Out 14.7 Seconds
Drawbar Pull (Loaded) 100.65 kN 22,619 lb

Axles

• Trunnion mounted planetary 55 degree steer axles.

• Integral steer cylinder.

• High bias limited slip differential on front axle.

Brakes

• Service Brakes are inboard wet disc brakes on front and rear axles.

• Parking Brakes are spring-applied hydraulic release on front axle.
Light on dash indicates when brake is on.

Instruments

• Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water
temperature gauge. All gauges protected by clear acrylic cover.

Work Tools

Hydraulic Includes Includes
IT Coupler Auxiliary Electrics Auxiliary Electrics

Pallet Forks (2) 1524 mm, (2) 60 in, 2 in x 6 in
51 mm x 152 mm
(2) 1219 mm, (2) 48 in, 2.36 in x 4 in
60 mm x 102 mm

Cubing Forks (2) 1219 mm, (2) 48 in, 2 in x 2 in
51 mm x 51 mm

Standard Tilt
Carriage 1270 mm 50 in

Wide Tilt
Carriage 1829 mm 72 in

Standard Rotate
Carriage 1270 mm 50 in

Wide Rotate
Carriage 1829 mm 72 in

Swing Carriage 100°, 1829 mm, 4028 kg 100°, 72 in, 9,000 lb
Capacity, 2268 kg Swung Capacity, 5,000 lb Swung

Side Shift Carriage 1.22 m 48 in

TL943 Telehandler

A

C

E

B

D

F

20°

8.5 m (28 ft)

9.7 m (32 ft)

10.9 m (36 ft)

12.1 m (40 ft)

13.4 m (44 ft)

14.6 m (48 ft)

7.3 m (24 ft)

6.1 m (20 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

-2.4 m (-8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 m (-4 ft)

3.7 m

(12 ft)

16 ft

(4.9 m)

20 ft

(6.1 m)

24 ft

(7.3 m)

28 ft

(8.5 m)

32 ft

(9.7 m)

36 ft

(10.9 m)

2.4 m
(8 ft)

1.2 m
(4 ft)

0 m

(0 ft)

40°

50°

60°

69°

0°

10°

30°

-6°

544 kg (1,200 lb)

907 kg (2,000 lb)

1360 kg (3,000 lb)

1814 kg (4,000 lb)

2267 kg (5,000 lb)

3175 kg (7,000 lb)

4082 kg (9,000 lb)

-10

10

20

30

40

50

60

70

80

TL943

Dimensions

All dimensions are approximate.

95.5 in. (2.41 m)

2.42 m (95. 3 in)

Load Chart and Dimensions

2.4 3 m (95 .5 in )

94 in. (2.38 m)

16.4 in.

483 mm (19 in)

(416 mm)

128 in. (3.25 m)

3.35 m (132 in)

221.6 in. (6.33 m)

6.25 m (246 in)

TL943

14.6 m (48 ft)

13.4 m (44 ft)

12.1 m (40 ft)

10.9 m (36 ft)

9.7 m (32 ft)

8.5 m (28 ft)

60°

50°

40°

69°

F

E

D

C

B

7.3 m (24 ft)

30°

A

6.1 m (20 ft)

36 ft

20°

10°

0°

-6°

32 ft

(9.7 m)

28 ft

(8.5 m)

1360 kg (3,000 lb)

907 kg (2,000 lb)

544 kg (1,200 lb)

20 ft

24 ft

(6.1 m)

(7.3 m)

3175 kg (7,000 lb)

2267 kg (5,000 lb)

1814 kg (4,000 lb)

3.7 m

16 ft

(4.9 m)

(12 ft)

2.4 m
(8 ft)

4082 kg (9,000 lb)

80

TL943

70

60

50

40

30

20

10

-10

1.2 m

0 m

(4 ft)

(0 ft)

4.9 m (16 ft)

3.7 m (12 ft)

2.4 m (8 ft)

1.2 m (4 ft)

0 m (0 ft)

-1.2 m (-4 ft)

-2.4 m (-8 ft)

(10.9 m)

For more complete information on Cat products, dealer services, and industry solut iions, visit us on the web at
www.cat .com

© 2010 Caterpillar
Printed in U.S.A.
All rights reserved.

CAT, CATERPILL AR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of C aterpillar and may not be used without permission.

IMPORTANT

Rated lift capacities shown are with machine
equipped with carriage and pallet forks. The
machine must be level on a firm surface with
undamaged, properly inflated tires. Machine
specifications and stability are based on rated
lift capacities at specific boom angles and
boom lengths. (If specifications are critical, the
proposed application should be discussed with
your dealer.)

DO NOT exceed rated lift capacity loads, as
unstable and dangerous machine conditions
will result.

-10

10

20

30

40

60

50

80

70

TL943

DO NOT tip the machine forward to determine
the allowable load.

Use only JLG approved attachments with
proper material handler model/attachment
load capacity charts displayed in the
operator’s cab. OSHA requires all rough
terrain forklift operators be trained
according to OSHA 29 CFR 1910.178 (1).

Due to continuous product improvements,
machine specifications and/or equipment
changes may be made without prior
notification. This machine meets or exceeds
ANSI/ITSDF B56.6-2005 as originally
manufactured for intended applications.

AEHQ584 0-05 (03-2010)