Information in this document is subject to change without notice and does not represent a commitment on the part of
MiLAN Technology.
MiLAN Technology provides this document “as is,” without warranty of any kind, either expressed or implied, including,
but not limited to, the implied warranty of fitness or merchantability for a particular purpose. MiLAN Technology may
make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at
any time.
This document could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes may be incorporated in new editions of the publication.
The MiLAN Technology Five-Year Limited Warranty
MiLAN Technology warrants to the original consumer or purchaser that each of its products, and all components thereof,
will be free from defects in material and/or workmanship for a period of five years from the original factory shipment
date. Any warranty hereunder is extended to the original consumer or purchaser and is not assignable. MiLAN
Technology makes no express or implied warranties including, but not limited to, any implied warranty of
merchantability or fitness for a particular purpose, except as expressly set forth in this warranty. In no event shall MiLAN
Technology be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the
performance of the product delivered hereunder. MiLAN Technology will in no case cover damages arising out of the
product being used in a negligent fashion or manner.
Regulatory Approvals
•FCC Class A
•UL 1950
•CSA 22 No. 950
•EN60950
•CE, EN55022 Class A, EN55024
Canadian EMI Notice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/
EEC) issued by the commission of the European Community. Compliance with these directives implies conformity to the
following European Norms:
•EN55022 (CISPR 22) - Radio Frequency Interference
•EN61000-X - Electromagnetic Immunity
•EN60950 (IEC950) - Product Safety
Year 2000 Compliance
MiLAN Technology warrants that the MIL-4650 and MIL-4655 series are year 2000 compliant. See www.milan.com for
additional information on other products.
To Contact Technical Support
For prompt response when calling for technical support, have the following information ready: product serial number,
date of purchase, vendor or place of purchase.
Contact one of the following:
• In North America: call +1.408.744.2751 or email: support@milan.com
International: call +49.231.97.47.780 or email: intl-support@milan.com
Doc #:90000088 Rev. B
Table of Contents
Preface
About this Manual............................................................................................... P-1
This guide covers both the MIL-4650 and the MIL-4655
Master/Slave modules. These modules were designed to be
installed into MiLAN’s Media Conversion System.
The terms “Master/Slave module” and just “module” are used
throughout this document to describe these devices. This
manual assumes that you are familiar with the tasks of a
system administrator.
P.2Master/Slave Documentation
A LAN Products CD-ROM
Master module. Use the CD-ROM to access the following
manuals:
This document has certain notation conventions that make it
easier to follow instructions and examples.
Table P-1: Notation Conventions
ConventionsDescription
[return]Brackets indicate a key to be pressed ([tab]).
Courier bold
“+” signThe “+” sign is used to indicate holding down one key while pressing
ItalicsItalics designate variables and titles of other documents.
“Quick Reference”Quotes refer to important information or a specific name.
CAPSCaps indicates abbreviations, specific directory, or product markings
Courier boldface font indicates a system message, options, or
instructions to be implemented.
another (e.g., “press [shift]+[C]”).
P-2MIL-4650/MIL-4655 Master/Slave Modules
Chapter 1: Introduction
Chapter 1 gives a description of the MIL-4650 and MIL-4655
Master/Slave modules.
1.1Overview of the Master/Slave Modules
1.1.1 MIL-4650 Master Module
The MIL-4650 Master module is designed to provide two-way
communication between a host device and MiLAN’s media
conversion modules. Communication between these devices is
performed via the network or a serial (RS-232) link. The
module uses auto-negotiation to perform in either 10/100
Mbps.
Thumbscrews
I
N
T
R
O
D
U
C
T
I
O
N
MANAGEMENT
INTERCONNECT
10/
TP
100
ACT
SYS
HDX/ACT
MIL-
4650
10/100BASE-TX
TP
LINK
FDX
Figure 1-1. MIL-4650 Master Front Panel
1.1.2 MIL-4655 Slave Module
The MIL-4655 Slave module is designed to send commands to
and receive status from MiLAN’s media conversion modules.
Thumbscrews
SYS
MIL-
4655
INOUT
INOUT
RS-232
ON
1 2
Figure 1-2. MIL-4655 Slave Front Panel
MIL-4650/MIL-4655 Master/Slave Modules1-1
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.