MiLAN E-MCC-1600, E-MCC-MM Install Manual

Installing Optional Management Module in
E-MCC-1600 Chassis

E-MCC-MM

CAUTION: Wear a grounding device and observe electrostatic
discharge precautions when installing Management Module in the 16­Slot Media Conversion Center. Failure to observe this caution could
result in damage to, and subsequent failure of, Management Module.

To install the Management Module in the E-MCC-1600 chassis:

1. Locate Management Module installation slot on back of E-MCC-

1600.

2. Remove Management Module protective plate from installation
slot by removing two screws that secure plate to back of E­MCC-1600.

3. Carefully slide Management Module into installation slot,
aligning Management Module with installation guides:

NOTE: Ensure that the Management Module is firmly seated
against the backplane.

4. Carefully rotate panel fastener screws (PROVIDED WITH
MANAGEMENT MODULE) clockwise to secure.

33052.A

Installing Optional Management Module in
E-MCC-1600 Chassis

E-MCC-MM

CAUTION: Wear a grounding device and observe electrostatic
discharge precautions when installing Management Module in the 16­Slot Media Conversion Center. Failure to observe this caution could
result in damage to, and subsequent failure of, Management Module.

To install the Management Module in the E-MCC-1600 chassis:

1. Locate Management Module installation slot on back of E-MCC-

1600.

2. Remove Management Module protective plate from installation
slot by removing two screws that secure plate to back of E­MCC-1600.

3. Carefully slide Management Module into installation slot,
aligning Management Module with installation guides:

NOTE: Ensure that the Management Module is firmly seated
against the backplane.

4. Carefully rotate panel fastener screws (PROVIDED WITH
MANAGEMENT MODULE) clockwise to secure.

33052.A

I
O

I
O

I
O

I
O