Miele PT 7186 Vario Operating instructions
Commissioning,
Programme chart and Settings
PT 7186 Vario
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed, commissioned
and used for the first time.
en-GB
M.-Nr. 07 529 120
Contents
Commissioning the tumble dryer.....................................4
Programme overview..............................................11
Basic programmes ................................................11
Household .......................................................15
Small businesses ..................................................16
Bedding .........................................................18
Buildings maintenance .............................................18
Fire service ......................................................19
Professional cleaners...............................................20
Equestrian .......................................................20
Special programmes ...............................................21
Settings/Supervisor level menu .....................................23
Language J ......................................................25
Sort languages....................................................25
Language menu...................................................25
Supervisor level ..................................................26
Favourites .......................................................26
Anti-crease.......................................................26
Buzzer ..........................................................26
Time of day ......................................................27
Display contrast ...................................................27
Display brightness .................................................27
Demo programme .................................................27
Standby .........................................................28
Extended cool down ...............................................28
Save ............................................................28
Temperature unit ..................................................28
Drying levels .....................................................29
Cottons drying levels ............................................29
Minimum iron drying levels ........................................29
Automatic drying levels ..........................................29
Machine iron drying levels ........................................29
Clean out airways .................................................29
Clean the filter ....................................................30
Display res. moisture ...............................................30
Delay start .......................................................30
Controls .........................................................31
Logo............................................................32
2
Contents
Target groups ....................................................32
Special programmes ...............................................32
Settings which can only be changed during the commissioning process . . 35
Payment system...................................................35
Coin mechanism lock ..............................................35
Signal to pin 7 ....................................................35
T-max exceeded ..................................................36
Duration cool air...................................................36
Cool air free ......................................................36
Duration hot air ...................................................36
Supervisor level code ..............................................36
3
Commissioning the tumble dryer
Before using for the first time
Before commissioning the tumble dryer, ensure that it
,
is correctly installed and connected. Read the separate
Operating and installation instructions as well as this
booklet.
The commissioning process must be carried out in full to
determine the settings for daily operation.*
* Some settings can only be altered during the
commissioning process. After that, these can only be
changed by a Miele service technician.
Setting the language J
Settings
Language F
#eština
dansk
deutsch
english H
^ Turn the multi-function selector to highlight the language of
your choice.
^ Press the multi-function selector to confirm your choice of
language.
Use this language?
OK
H
^
Turn the multi-function selector to select OK, and confirm
Back A
H
by pressing the multi-function selector.
If you wish to select a different language:
^
Select and confirm back.
4
To set the time of day
The time may already have been set at the factory. If it has,
and is correct, you can skip this section. It is possible to alter
the time at any stage
Commissioning the tumble dryer
via the Settings menu.
Settings
Time of day
Confirm either 24 h or 12 h. If you confirm Time not
^
Back A
24 h clock...
12 h clock...
Time not displayed
displayed, the following step will be skipped.
9 :00
Set the time of day
^ Turn the multi-function selector to select the hour and press
it to confirm your selection.
^ Then set the minutes.
^ Pressing the multi-function selector again saves the time of
day in memory.
5
Commissioning the tumble dryer
Determining target groups
By selecting target groups, you are determining the
programme range of the tumble dryer. You can see which
programmes are assigned to each target group under
"Programme chart" later in this booklet.
Settings
Target groups
Use the multi-function selector to select and confirm none
^
one
or several of the target groups, as required.
A target group selected will be indicated with a tick:
–
§ Professional cleaners
~ Equestrian
~ Special programmes
Confirm selection
V
9.
– Mark the target group programmes that you wish to select
with a cross in the box
8 Household
8 Small businesses
8 Bedding
8 Buildings maintenance
8 Fire service
8 Professional cleaners
8 Equestrian
8 Special programmes
8.
The target group programmes selected will be added to the
basic programmes.
^
Only once you have made your selection
, select and
confirm Confirm selection.
,
6
Commissioning the tumble dryer
Each of these settings must now be
confirmed (and altered if required).
More details about the settings are
given at the end of this booklet.
Place a cross in the box
indicate your selection, or fill in the
gaps _____ as required.
Display contrast
Can be altered in 10 graduated steps.
Step _____ (1 to 10)
Display brightness
Can be altered in 10 graduated steps.
8 to
Payment system
Settings for coin operation.
8 No coin box
The additional settings (see below,
Additional settings "Coin box") are
skipped.
8 Programme operation
The tumble dryer is programme
controlled on payment.
8 Timed operation
The tumble dryer is time controlled
on payment.
Step _____ (1 to 10)
8 RS 232
When the tumble dryer is
coin-operated, serial interface RS
232 is activated.
8 IK6
When the tumble dryer is
coin-operated, serial interface RS
232 is activated for IK6.
Additional settings "Coin box"
–
Coin mechanism lock
Time in which settings can be altered
without losing coins.
8 Off
8 Immediately after programme start
8 _____ Minute(s) after programme
start
(pto)
7
Commissioning the tumble dryer
Signal to pin 7
–
Setting the feedback signal for the
coin box.
8 Programme finish
8 Release the start button
8 Programme start and finish
T-max exceeded
–
Setting a security time margin to
prevent the coin box being tampered
with.
8 _____ minutes
Duration cool air
–
This determines the maximum
programme duration in control
options WS shortcut keys, ex/int time.
8 _____ minutes
– Cool air free
To start the programme without
payment.
8 On
8 Off
–
Duration hot air
Supervisor level code
The Settings/Supervisor level menu can
be locked with a code to prevent it
being accessed by unauthorised
personnel (the Language J setting can
still be altered).
Select the option you want.
^
8 Code not required
Only some of the settings can be
changed (temporary Language
setting, Anti-crease, Buzzer, Time of
day, Contrast, Brightness, Standby,
Extended cool down, Memory and
Temperature unit).
These settings can be changed by
any user.
8 Code required
A code must be entered in order to
change the settings. All settings (see
Settings menu) can be changed.
Select this option if you only want
users to be able to change settings
via a code.
This determines the maximum
programme duration in control
options WS shortcut keys, ex/int time.
8 _____ minutes
8
Commissioning the tumble dryer
To repeat the commissioning process
If you are not certain that all of the settings are correct, you
will need to repeat the commissioning process.
Set up successful
i
OK
H
Select Back and confirm your selection.
^
To finish the commissioning process
1. Confirm
–
If you are sure that all of the settings are correct.
Set up successful
i
OK
H
^ Confirm with OK.
Back A
H
Back A
H
1 Cottons
2 Minimum iron Settings F ...
3 Woollens handcare
4 Smoothing 10:00
Programme selection ...
The entry menu will appear (example).
9
Commissioning the tumble dryer
2. Start a cool air programme
–
To complete the commissioning process, a programme cycle
using cool air (Cool air or Timed drying cool air) needs to be
started.
If the power to the tumble dryer is switched off before the
first programme is started (e.g. by pressing the K button),
the commissioning process can be repeated. The
commissioning process is only completed once the first
programme cycle (at least 20 minutes) has finished.
Select a cool air programme and confirm your selection.
^
The menu for the cool air programme appears.
^ Press the flashing Start button.
After this programme has finished, the tumble dryer is ready
for use.
10
Programme overview
Basic programmes
(Factory default)
Cottons max. 8 kg
Extra dry, Normal+, Normal
Fabric type
Note
Low temperature Select for fabrics with the r symbol.
Hand iron r, Hand iron rr, Machine iron
Fabric type – Cotton or linen fabrics,
Note – To prevent laundry from drying out, it should be rolled up
Low temperature Select for fabrics with the r symbol.
Minimum iron max. 4 kg
Normal+, Normal, Hand iron r
Fabric type
Low temperature Select for fabrics with the r symbol.
Single and multi-layered cotton fabrics such as:
–
Towelling, T-shirts, underwear, bed linen and baby clothes.
–
Workwear, jackets, cotton blankets, aprons, face flannels,
–
tea towels, bed linen, towels, table linen that can be
washed hot, overalls.
Select Extra dry for multi-layered and very thick fabrics.
–
Do not use Extra dry for loopknit fabrics (e.g. T-shirts,
–
underwear, baby clothes), as they have a tendency to
shrink.
– table linen, bed linen, starched laundry.
until you are ready for ironing.
–
Minimum iron items made of cotton, synthetic or blended
fabrics,
–
Work clothing, overalls, pullovers, dresses, trousers, table
linen
*
*
*
Weight of dry laundry
11
Programme overview
Delicates max. 4 kg
Normal+, Normal, Hand iron r
Fabric type
Delicate items made of cotton, synthetic or blended fabrics,
–
Thin pullovers, dresses, trousers, overalls, table cloths, shirts,
–
blouses.
Lingerie and appliquéd fabrics.
–
Note
Low creasing.
–
Towelling max. 8 kg
Normal+
Fabric type
Large quantities of single-layer and multi-layer towelling items.
–
Towels, dressing gowns, face flannels, towelling bedding.
–
Denim max. 4 kg
Normal, Hand iron r
Fabric type – Denim garments, e.g. jeans, jackets, skirts, shirts.
Shirts max. 4 kg
Normal, Hand iron r
Fabric type – Shirts and blouses.
*
Weight of dry laundry
*
*
*
*
12
Loading...