30” All Gas Range
HR 1124 G/LP
30” Dual Fuel Range
HR 1724 DF G/LP
HR 1924 DF G/LP
Shown: HR 1724 DF under DAR 1220
Please note: This information is subject to change
Specication Sheet TRS 03192018
8mieleusa.com
30” All Gas and Dual Fuel Range
SPECIFICATIONS
Overall Unit Dimensions 29
Oven Door Clearance 25” (635 mm)
Niche
Minimum Cabinet Niche Opening 30” (762 mm) W x 35
Gas
Gas Line Connection 1/2” NPT
Operational Altitudes
High Altitude
Electrical
Electrical Requirements
Power Cord
NEMA 5-15p, 5’ 11” (1.8m) NEMA 14-30p, 5’ 11” (1.8m)
Plumbing
Plumbing Requirements
Plumbed Hose Connection
Shipping HR 1124 HR 1724 DF HR 1924 DF
Shipping Weight 337.3 lbs (153 kg) 385.1 lbs (174.7 kg)
Shipping Dimensions 7
Installation Accessories HR 1124 HR 1724 DF HR 1924 DF
12” Backguard RBGAG1230 RBGDF1230
20” Backguard RBGAG2030 RBGDF2030
40” Backsplash RBS30 RBS30
Support
Call Miele (800) 999-1360
Miele Website
20/20 Link
15
/16” (760 mm) W x 351/2” — 37” (902 — 940 mm) H x 261/2” (678 mm) D [Depth to control panel]
1
/2” (902 mm) H
Miele Natural Gas and LP Ranges will function up to 9,800 ft. in altitude without adjustment. If an installation
exceeds these elevations, please contact rangejetkit@mieleusa.com.
HR 1124 HR 1724 DF HR 1924 DF
120V, 60Hz, 15A 120/208-240V, 60Hz, 30A
HR 1124 HR 1724 DF HR 1924 DF
An Inline water lter, like activated carbon, is required to
reduce mineral deposits. Do not connect to a Reverse
Osmosis (RO) water system. Connect to a cold water
-
supply only. Must be connected to a shut-off valve. The
water shut-off valve must be accessible after installation.
The water pressure must be between 14.5 and 145 psi
(1 and 10 bars). If the pressure is higher, install a pressure
reducing valve.
Supplied hose: flexible braided 4’11” (1.5 m) with
-
compression fitting for connection to a shut off valve.The
total hose length must not exceed 24.5 ft. (7.5 m).
7
/16” (950 mm) W x 52” (1,294 mm) H x 311/2” (800 mm) D
8www.mieleusa.com
82020technologies.com
3
/8” O.D.
HR 1124 DF
Item 25112451USA
HR 1124 DF LP
Item 25112452USA
HR 1724 DF
Item 25172451USA
HR 1724 DF LP
Item 25172452USA
HR 1924 DF
Item 25192451USA
HR 1924 DF LP
Item 25192452USA
Page 2 of 4
PRODUCT DIMENSIONS
30” All Gas and Dual Fuel Range
(x) = Toe-kick height adjustment 5” - 6 1/2” (127 mm - 165.1 mm)
E = Electrical connection
G = Gas connection
W = Water connection (HR 1924 Only)
SIDE VIEW BULLNOSE DETAILS
(x) = Toe-kick height adjustment 5” - 6 1/2” (127 mm - 165.1 mm)
Page 3 of 4
All Gas & DF 30” Range BTU Output
HR1x24 Burners
30” All Gas and Dual Fuel Range
Gas Burners:
Total BTU Output 71,000 BTU (G/LP)
Oven Burners (HR1124 Only)
Oven Top
Burners
Oven Bottom
Burner
(1) 12,500 BTU (G/LP);
(3) 19,500 BTU (G/LP)
22,000 BTU (G);
20,150 BTU (LP)
25,500 BTU (G)
23,200 BTU (LP)
W = Water connection (HR 1924 DF only), G = Gas connection
Note:
Please observe safe distances to rear
combustible surfaces of 12” (305 mm)
clearances. For zero clearance
installation, Miele Backguards will
satisfy the required distance to
combustible surfaces. The Miele
Backguard is available in 12” (305 mm)
or 20” (508 mm) heights.
Specication Sheet TRS 3192018
Page 4 of 4
Loading...