Miele G 6980, G 6985 Operating instructions

Download

Operating Instructions Dishwasher

To prevent accidents and machine damage, read these instructions be‐ fore installation or use.

en-US M.-Nr. 10 014 210HG05

Contents

IMPORTANT SAFETY INSTRUCTIONS................................................................. 5

Guide to the dishwasher .....................................................................................

Appliance overview................................................................................................ 14

Control panel.......................................................................................................... 15

Display functions.................................................................................................... 16

Caring for the environment.................................................................................

Disposal of packaging material.............................................................................. 17

Disposal of your old appliance .............................................................................. 17

Energy-saving dishwashing ................................................................................... 17

Before using for the first time.............................................................................

Opening the door................................................................................................... 18

Emergency door opener ................................................................................... 19

Closing the door .................................................................................................... 19

Basic settings......................................................................................................... 20

Before using the appliance for the first time, you require:..................................... 22

Dishwasher salt...................................................................................................... 22

Filling the salt reservoir..................................................................................... 23

Salt refill indicator ............................................................................................. 24

Rinse aid ................................................................................................................ 25

Adding rinse aid................................................................................................ 25

Rinse aid indicator ............................................................................................ 26

Loading the dishwasher ......................................................................................

Tips ........................................................................................................................ 27

Loading examples.................................................................................................. 29

Upper basket ......................................................................................................... 33

Adjusting the upper basket............................................................................... 35

Lower basket ......................................................................................................... 36

Grates and filters.................................................................................................... 39

Cutlery.................................................................................................................... 41

3D cutlery tray (depending on model)............................................................... 41

Operation ..............................................................................................................

Detergent ............................................................................................................... 42

Adding detergent .............................................................................................. 43

Turning on .............................................................................................................. 44

Selecting a program............................................................................................... 44

Starting a program................................................................................................. 45

Time display........................................................................................................... 45

TimeControl ........................................................................................................... 46

Energy management.............................................................................................. 46

Contents

At the end of the program...................................................................................... 47

Turning off .............................................................................................................. 48

Unloading the dishwasher ..................................................................................... 48

Interrupting a program........................................................................................... 49

Changing a program .............................................................................................. 49

Options..................................................................................................................

Options .................................................................................................................. 50

Delay Start with EcoStart....................................................................................... 52

Program overview................................................................................................

Settings menu ......................................................................................................

Opening the Settings menu ................................................................................... 57

Language ............................................................................................................

Time of day ............................................................................................................ 58

Water hardness...................................................................................................... 59

Rinse aid ................................................................................................................ 60

SensorWash........................................................................................................... 60

AutoOpen............................................................................................................... 60

Knock2Open .......................................................................................................... 61

BrilliantLight ........................................................................................................... 61

Optimize Standby .................................................................................................. 61

Check filters ........................................................................................................... 62

Changing the main menu....................................................................................... 62

Saving options ....................................................................................................... 63

Temperature........................................................................................................... 63

Brightness.............................................................................................................. 63

Volume ................................................................................................................... 63

Memory.................................................................................................................. 64

RemoteVision......................................................................................................... 64

Version info ............................................................................................................ 64

EcoStart ................................................................................................................. 65

Showroom program............................................................................................... 67

Factory default settings.......................................................................................... 67

Closing the Settings menu..................................................................................... 67

Cleaning and care................................................................................................

Cleaning the wash cabinet..................................................................................... 68

Cleaning the door and the door seal ..................................................................... 68

Cleaning the control panel..................................................................................... 68

Cleaning the indicator reflector panel.................................................................... 68

Cleaning the door front.......................................................................................... 69

Filter system........................................................................................................... 70

Contents

Cleaning the spray arms ........................................................................................ 72

Frequently Asked Questions...............................................................................

Technical problems................................................................................................ 73

Water intake fault................................................................................................... 76

Water drainage fault............................................................................................... 77

General problems................................................................................................... 78

Noises .................................................................................................................... 80

Poor cleaning results.............................................................................................. 81

Frequently asked questions................................................................................

Cleaning the drain pump and non-return valve ..................................................... 84

Customer service.................................................................................................

Repairs................................................................................................................... 85

Warranty................................................................................................................. 85

Optional accessories...........................................................................................

............................................................................................................................... 88

Installation Instructions.......................................................................................... 89

Electrical connection...........................................................................................

Water connection.................................................................................................

Connection to the water supply............................................................................. 92

Drainage................................................................................................................. 93

Sound emission testing.......................................................................................

IMPORTANT SAFETY INSTRUCTIONS

This dishwasher complies with current safety requirements. Inap‐

opriate use can, however, lead to personal injury and damage to

pr property.

To avoid the risk of accidents and damage to the dishwasher, please carefully before it is installed and used for the first time. They con‐ tain important information on its installation, safety, use and main‐ tenance.

Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner.

Miele cannot be held liable for damage caused by non-compli‐ ance with this information.

read the installation plan and the operating instructions

IMPORTANT SAFETY INSTRUCTIONS

Correct use

 This dishwashe

similar residential environments.

r is intended for use in domestic households and

 This dishwasher is not suitable for outdoor use.  It must only be used as specified in these operating instructions

for cleaning domestic dishware and cutlery. Any other usage is not supported by the manufacturer and could be dangerous.

 This applianc

dren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

e is not intended for use by persons (including chil‐

Safety with children

IMPORTANT SAFETY INSTRUCTIONS

 Chil

constantly supervised.

 Chil

with the appliance. Keep small children away from the appliance at all times to avoid the risk of injury. There is the risk that children may lock themselves in the dishwasher.

 If

is active keep young children away from the area in which the door opens. Danger of injury in the unlikely event of a fault with the open‐ ing mechanism.

 Dange

etc. are disposed of safely and kept out of the reach of children.

 K

cause burning in the mouth, nose and throat if swallowed, or inhibit breathing. Keep children away from the dishwasher when the door is open. There could still be detergent residues in the cabinet. Seek medical attention immediately if your child has swallowed or inhaled detergent.

dren must be kept away from the appliance unless they are

dren should be supervised to ensure that they do not play

the automatic door opening mechanism (depending on model)

r of suffocation! Ensure that any plastic wrappings, bags,

eep children away from detergents. Dishwasher detergents can

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

 Installatio

formed by a Miele-authorized service technician. Work by unquali‐ fied persons could be dangerous and may void the warranty.

 Befor

age. Under no circumstances should you use a damaged dishwash‐ er. A damaged dishwasher could be dangerous.

 The ele

when continuity is complete between it and an effective grounding system. It is most important that this basic safety requirement is present and regularly tested and, where there is any doubt, the elec‐ trical system in the house should be checked by a qualified electri‐ cian. Miele cannot be held liable for the consequences of an inadequate grounding system (e.g. electric shock).

 Reliable

ed if it has been connected to the electrical supply.

 The dishwasher must on

via a suitable switched socket using a 3-pin plug with a grounding contact (it must not be hard-wired). The electrical socket must be easily accessible after the dishwasher is installed so that it can be disconnected from the electricity supply at any time.

n, repair, and maintenance work should only be per‐

e installation, check the dishwasher for visible signs of dam‐

ctrical safety of this appliance can only be guaranteed

and safe operation of this dishwasher can only be assur‐

ly be plugged into the electricity supply

 Ther

is a danger of overheating and fire risk if the dishwasher is pushed up against a plug.

 The dishwasher must no

radiant temperatures which are sometimes generated by a cooktop could damage the dishwasher. For the same reason, it should not be installed next to open fires or other appliances which give off heat, such as heaters, etc.

e must be no electrical sockets behind the dishwasher. There

t be installed under a cooktop. The high

IMPORTANT SAFETY INSTRUCTIONS

o avoid the risk of damage to the dishwasher, make sure that the

 T

connection data on the data plate (fuse rating, voltage, and frequen‐ cy) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt.

 Do not con

been fully installed and any adjustment has been made to the door springs.

 The dishwasher may on

nism is working correctly. Otherwise there could be a risk of danger while the automatic door opening mechanism (depending on model) is active. To check that the door opening mechanism is working correctly:

– The door springs must be adjusted equally on both sides. They

e correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open.

– The door locking pins automatically retract when the door opens

at the end of the dr

nect the dishwasher to the electrical supply until it has

ly be operated if the door opening mecha‐

ying phase.

 Do not connect the appliance to the electrical supply by a multi-

socket adapter or an extension lead. These do not guarantee the re‐ quired safety of the appliance (e.g. danger of overheating).

 This applianc

tionary location (e.g., on a ship).

e must not be installed and operated in a non-sta‐

 Do not insta

frost. Frozen hoses may burst or split. The reliability of the electronic module may be impaired at temperatures below freezing point.

 The wat

be between 7.25 - 145 psi.

 A d

damaged, turn off the electrical supply and contact Miele.

amaged appliance could be dangerous. If the dishwasher gets

ll the dishwasher in a room where there is a risk of

er pressure (flow pressure at the connection point) must

IMPORTANT SAFETY INSTRUCTIONS

 The manu

not repaired by a Miele-authorized service technician.

 Defective co

only. Only with these parts can the manufacturer guarantee the safe‐ ty of the appliance.

 During

must be disconnected from the electrical supply (turn it off and with‐ draw the plug from the socket).

 If

the connection cable is damaged, it must be replaced with a special cable of the same type (available from Miele) by a Miele-au‐ thorized service technician only.

facturer's warranty will be invalidated if the appliance is

mponents should be replaced by Miele original parts

installation, maintenance and repair work, the appliance

Proper installation

IMPORTANT SAFETY INSTRUCTIONS

 The dishwasher must be install

with the installation plan.

 Be car

gloves to avoid injury on any sharp metal components.

eful when installing the dishwasher. Wear protective

 The dishwasher must be corr

problem-free operation.

ed and connected in compliance

ectly aligned horizontally to ensure

 In order to ensure stability, built-under and integrated dishwash‐

ers must only be installed under a continuous counter which is se‐ cured to adjacent cabinetry.

 If you want to convert your freestanding dishwasher to a built-un‐

der ("U") model, you will need to order the appropriate conversion kit. If you remove the existing toe-kick, you must replace it with a Umodel plinth. This is necessary to avoid the risk of injury caused by protruding metal parts.

 The door spring

are correctly adjusted when the door remains stationary when left half open (approx. 45° opening angle). It is also important that the door cannot fall open. The appliance may only be used with correctly adjusted door springs.

s must be adjusted equally on both sides. They

IMPORTANT SAFETY INSTRUCTIONS

Proper use

 Do not use sol  Do not inh

contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or in‐ haled.

 A

void leaving the door open unnecessarily as someone could trip

over it and be injured by it.

 Do not sit or lea

washer to tip and be damaged, and you could get injured.

 Dishes can

cool until they are comfortable enough to handle before unloading.

 Only use det

washers. Do not use dishwashing liquid.

 Do not use co

cause damage, and there is a risk of a severe explosive chemical re‐ action (such as an explosive oxyhydrogen gas reaction).

vents in the dishwasher. Danger of explosion!

ale or ingest powder detergent. Dishwasher detergents

n on the opened door. This could cause the dish‐

be very hot at the end of a program. Allow them to

ergent and rinse aid formulated for domestic dish‐

mmercial or industrial detergents as these may

 Do not fill

This will cause serious damage to the reservoir.

 Inadver

washer detergent will damage the water softener. Make sure you have picked up the correct packet of dishwasher salt before filling the salt reservoir!

 Only use special coa

Do not use other salts such as cooking salt, agricultural grade or gritting salt. These may contain insoluble additives which can impair the functioning of the water softener.

the rinse aid reservoir with powder or liquid detergent.

tently filling the salt reservoir with powder or liquid dish‐

rse grained dishwasher salt for reactivation.

IMPORTANT SAFETY INSTRUCTIONS

 In an app

lery is cleaned and dried more efficiently if placed in the basket with the handles downwards. However, to avoid the risk of injury, place knives and forks with the handles upwards.

 Plastic it

such as disposable plastic containers or plastic cutlery should not be cleaned in the dishwasher. The high temperatures in the dish‐ washer may cause them to melt or lose shape.

you use the "FlexiTimer/Delay Start" option (depending on mod‐

 If

el), make sure that the dispenser is dry before adding detergent. Wipe dry if necessary. Detergent will clog if poured into a damp dis‐ penser and may not be thoroughly dispersed.

liance with a cutlery basket (depending on model), cut‐

ems which cannot withstand being washed in hot water,

 Please observe the information given in "Technical data" regard‐

ing the capacity of the dishwasher.

Accessories

 Use only ge

ries from other manufacturers are used, the warranty may become invalid.

nuine original Miele parts. If spare parts or accesso‐

Disposal of your old dishwasher

 Mak

tally shut themselves in. Remove or destroy the locking bracket of the door lock, and make appropriate arrangements for the disposal of the appliance.

SAVE THESE INSTRUCTIONS AND PASS THEM ON TO ANY FUTURE USER

e the door lock inoperative so that children cannot acciden‐

Guide to the dishwasher

Appliance overview

Upper spray arm (not visible)

Cutlery tray (depending on model)

Upper basket

Middle spray arm

Air intake for drying (depending on model)

Lower spray arm

Filter system

Data plate

Rinse aid reservoir

Dual compartment detergent dis‐ penser

TimeControl function

Reservoir for dishwasher salt

Control panel

Guide to the dishwasher

Button  (On/Off For turning the dishwasher on and off.

TimeControl function

For displaying the program time re‐ maining with the door shut.

Button  (Information For displaying additional information about the option

Arrow buttons  For scrolling through display options.

These operating instructions apply to several different dishwasher models with differ

ent heights. The specific dishwasher models are referred to as follows: Standard = 31 11/16" (80.5 cm) high dishwashers (integrated) and 33 1/4" (84.5 cm) high dishwashers (freestanding) XXL = 33 1/4" (84.5 cm) high dishwashers (integrated)

)

button)

in the display.

 (Back) b For navigating back to the previous menu or deleting values which have been

set previously.

OK bu For selecting the option shown in the display For confirming messages.

Display

See next page for more information.

 bu lay Start)

For selecting the "Delay Start" func‐ tion.

utton

tton

tton with indicator light (De‐

Guide to the dishwasher

Display functions

General information

The display is used to select or set the following:

– The program – Any options – The Delay Start function – The Settings  menu – The display of information The display can show the following: – The program name – The program stage – The current time of day – The estimated time left for the pro‐

am to run

– Any relevant fault messages and in‐

formation

To save energy, the dishwasher turns

er a few minutes if you do not

off aft press any buttons during this time. To switch the dishwasher back on again, press the  button.

The scroll bar  on the right of the dis‐ play indicat more text are available which can be displayed by touching the relevant ar‐ row button .

A dotted line will appear under the last option available.

The OK senso firm a message or setting and also to move to the next menu or another menu level.

A check  will appear beside the op‐ tion whic

To exit a sub-menu, touch the  sen‐ sor butt If you do not press any of the sensor buttons for several seconds, the display will return to the previous menu level. You may need to enter your settings again.

The Touch On metal sensor buttons re‐ act t

o pressure and not simply to touch.

The Settings electronic module of the dishwasher to changing requirements (see "Set‐ tings menu").

es that more options or

r button is used to con‐

h is currently selected.

on (Back).

 menu is to adapt the

Caring for the environment

Disposal of packaging material

The cardboard box and packaging pro‐

ect the appliance during shipping.

t These materials are biodegradable and recyclable. Please recycle.

Disposal of your old appliance

Old appliances may contain materials th

at can be recycled. Please contact your local recycling authority about the possibility of recycling these materials.

Please be sure that your old appliance

es not pose a danger to children

do while being stored for disposal.

Energy-saving dishwashing

This dishwasher is economical in the use of wat sults follow these tips:

– For most economical dishwashing,

mak overloading the dishwasher.

– Choose a program that best suits the

degr dishes being washed.

– Select the ECO pr

on model) for energy-saving dish‐ washing. This program is the most ef‐ ficient in terms of its combined ener‐ gy and water consumption at clean‐ ing normally soiled dishware.

– If your dishwasher is connected to a

hot wat

Saver program for washing a lightly to

moderately soiled load. Because the water is not heated in this program, dishware may still be slightly damper at the end of this program than it would be with other programs.

er and electricity. For best re‐

e full use of the baskets without

ee of soiling and the type of

ogram (depending

er supply, select the Energy

– Follow the detergent manufacturer's

ecommendations on detergent dos‐

age.

– When using powder or liquid deter‐

gent, you can use 1/3 less det baskets are only half full.

You can find additional tips on energysaving dishwashing in "Miele's guide t

o dishwashing".

ergent if

Before using for the first time

Opening the door

This dishwasher has a motorized door

ner which is activated by knocking

ope on the door front ("Knock2Open func‐ tion").

 Knock twice in quick succession on

the top third of the door front.

The door will open a little.  The

re are two dark grips inside the door at the top. Take hold of them and pull to release the door lock.

 W

ater in the dishwasher may be

hot. Danger of scalding! Only open the door during operation

if absolutely necessary and exercise extreme caution when doing so.

 K

eep the area around the door

free of obstructions.

At the end of programs with a drying phase (see "P door will open automatically a little in order to help the drying process. This function can be deactivated if pre‐ ferred (see "Settings menu - AutoOp‐ en").

rogram overview"), the

The door locking pin then retracts. If the door is opened during operation,

all functions are automatically interrupt‐ ed.

The number of knocks required for opening the door can be changed if wished (see "Settings - Knock2Open").

Emergency door opener

If the door will not open when knocked or if ther can be opened manually with the emer‐ gency door opener supplied with the dishwasher.

 P

 T

e is a power failure, the door

ush the emergency door opener into the gap between the dishwasher front and the neighboring unit door about 5 7/8" (15 cm) below the coun‐ ter .

urn the emergency door opener

clockwise  until it engages behind the dishwasher front.

Before using for the first time

 Then use it to pull the door open.

Closing the door

 P

ush the baskets in.

hen raise the door upwards until the

 T

catch engages.

The door will then close automatically.

 Danger of crushing injuries!

Do not put your hand inside the door as it is closing.

Before using for the first time

Basic settings

 Open the d  T

urn the dishwasher on using the 

sensor button.

The welcome screen will appear when the dishwasher is turned on for the first time.

Language

The display will change automatically to the scr

 Use the  arr

the language you want and also the country, if appropriate, and confirm your selection with OK.

To learn about the display, read the section with the same name.

A check  will appear ne guage that has been set.

oor.

een for setting the language.

ow buttons to select

xt to the lan‐

Time of day

The display will then change to the scr

een for setting the time.

The time of day needs to be set before the Delay start pr used. You can also show the current time of day in the display.

 Use the  arrow buttons to set the

hour and confirm with OK.

n set the minutes and confirm

 The

with OK.

Keeping the relevant sensor button pr

essed will increase or decrease the

time automatically.

ogram option can be

Before using for the first time

Water hardness

The display changes to the water hard‐ ness setting.

– The dishwasher must be program‐

med for the wat area.

– Your local water supplier can tell you

the wat

– Where the water hardness fluctuates

e.g. between 10 - 16 gr/gal (10 - 15 °d), to the higher value (16 gr/gal or 15 °d in this example).

It is useful to know your water hardness so that you can technician with this information in the event of any service calls.

Enter the water hardness below: ____________ gr/gal (°d) The dishwasher is programmed at the

fact gr/gal (1 °d).

er hardness level in your area.

always program the dishwasher

ory for a water hardness level of 1

er hardness in your

provide the service

The message Set-up successfully com-

pleted w

After confirming this message with OK, the pr may appear.

 Add salt and rinse aid if necessary

 Confirm the messages with OK.

The display will switch to the main menu.

The prompt to set the dishwasher up for first use will not appear agai you have run the first complete pro‐ gram.

ill then appear in the display.

ompts  and  Refill rinse aid

(see "Before using for the first time Dishwasher salt" and "Rinse aid").

n after

 Use the  arr

the hardness of your water supply and confirm with OK.

See "Settings menu - Water hardness" for mor

e information.

ow buttons to select

Before using for the first time

Before using the appliance for the first tim

– Approx. 2 lbs (1 kg) of dishwasher

salt – Domestic dishwasher detergent – Rinse aid formulated for domestic

dishwashers

Every dishwasher is tested at the fac‐ t

ory. There will be residual water in the appliance from this test. It is not an in‐ dication that it has been used previ‐ ously.

e, you require:

Dishwasher salt

In order to achieve good cleaning re‐ sults, the d with soft water. Hard water results in a build-up of calcium deposits on dish‐ ware and in the dishwasher. Water supplies with a hardness level higher than 4 gr/gal (4 °d) needs to be softened. This takes place automatical‐ ly in the integrated water softener. The water softener in the dishwasher is suit‐ able for a water hardness level of up to 73 gr/gal (70 °d).

ishwasher needs to operate

If the water in your area is very soft and constantly lower than 5 gr/gal (5 °d)

you do not have to add dish‐ washer salt. The prompt to add salt will be switched off automatically.

 Dishwasher det

stroy the water softener. Do not fill the salt container with

dishwasher det detergent).

 Use only special

dishwasher salt or other pure kitchen salt.

Other types of salt may contain in‐ soluble components which can dam‐ ag

e the water softener.

ergent will de‐

ergent (even liquid

, coarse-grained

The water softener requires dishwasher salt. Depending (< 22 gr/gal or 21 °d), dishwasher salt is not required if combination tablets are being used (see "Operation - Deter‐ gent").

on the water hardness level

Filling the salt reservoir

Important! Before filling the salt res‐

voir with dishwasher salt for the

er first time, you must fill it with approx. 2 qt (2 l) of water to enable the salt to dissolve.

Once the dishwasher has been used for the first time, ther ficient water in the reservoir.

e is always suf‐

Before using for the first time

 Remo

 Fi

ve the lower basket and un‐

screw the salt reservoir cap.

Water will run out of the reservoir when the ca

It should therefore only be removed

order to refill the salt reservoir.

ll the reservoir with approx. 2 qt (2 l)

of water (first use only).

p is removed.

 Place the funnel provided over the

salt reservoir and carefully fill with salt until the reservoir is full. The salt reservoir holds approx. 4 lbs (2 kg) of salt depending on the brand used.

an any excess salt from around

 Cle

the reservoir opening and then screw the cap on again firmly.

 Immediat

voir, run the the and without any dishware in the dish‐ washer to remove any traces of salt from the cabinet.

ely after filling the salt reser‐

Short pr

Express pr

ogram option selected

ogram with

Before using for the first time

Salt refill indicator

 Fi

ll the salt reservoir with dishwasher salt for reactivation when  Refill salt appears in the display (If it appears during a program, wait until the end of the program).

 Confirm with OK. The message will go out.

 Risk of corr

Immediately after filling the salt res‐ ervoir, run the Express program with the Short program option selected and without any dishware in the dishwasher to remove any traces of salt from the cabinet.

After the salt reservoir has been filled,

efill indicator may still appear in the

the r display if the salt concentration has not yet reached the correct level. If this is the case, confirm again with

The salt refill indicator will be turned off if you have pr er for a water hardness below 5 gr/gal (5 °d).

osion!

OK.

ogrammed the dishwash‐

If you only ever use Tab products in your dishwasher both refill indicators for salt and rinse aid if you wish (see "Settings menu Switching off the refill indicators").

If you switch to using detergent that does not contain salt or rinse aid, it is impor dishwasher salt and rinse aid and to switch the indicators back on.

tant to remember to add

, you can switch off

Before using for the first time

Rinse aid

Rinse aid is needed to prevent spotting

dishes and glassware. The rinse aid

on is filled in the reservoir and the set amount will be automatically dosed.

 Filli

detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the res‐ ervoir.

When using "Tab" detergents rinse aid is not needed.

ng the rinse aid reservoir with

Adding rinse aid

 P

ress the button on the lid of the rinse aid reservoir in the direction of the arrow until the flap springs open.

Before using for the first time

 Add rinse aid only until it is visible in

the opening.

The rinse aid reservoir holds approx.

3.7 o

z. (110 ml).

 Close the flap firmly so that it clicks

o place. Otherwise water can enter

int the rinse aid reservoir during a pro‐ gram.

Rinse aid indicator

When the  Refill rinse aid message ap‐ p

ears in the display, the reservoir con‐ tains sufficient rinse aid for 2 - 3 pro‐ grams only.

 Add rinse aid.  Confirm with OK.

The message will go out.

If you only ever use Tab products in your dishwasher refill indicators for salt and rinse aid if you wish (see "Settings menu - Turn‐ ing off the refill indicators").

, you can turn off both

 W

ipe up any spilled rinse aid. This prevents over-foaming occurring dur‐ ing the next program.

You can adjust the rinse aid dosage for best r Rinse aid").

esults (see "Settings menu -

Loading the dishwasher

Tips

Remove coarse food residues from the dishwar

There is no need to rinse items under runni

Dishware can be loaded anywhere in the baskets, but the following notes should be observed:

– Do not place dishes or cutlery inside

– Load the dishware so that water can

– Make sure that all items are securely

ng water!

 Do not wash it

ash, sand, wax, grease, or paint in the dishwasher. These will damage the dishwasher.

other pieces. They will cover each othe

acce

ss all surfaces. This ensures that

they get properly cleaned.

positioned.

ems soiled with

– Make sure that small items cannot

fall

through the holders in the bas‐ kets. Small items, e.g., lids, should there‐ fore be placed in the cutlery tray or cutlery basket (depending on model).

Some foods may contain natural dyes, e.g., mato sauce. Plastic items in the dishwasher may discolor if large quantities of these foodstuffs find their way into the dishwasher on the dishware. The stability of plastic items is not affected by this discolor‐ ation. Cleaning silver cutlery in the dish‐ washer may also cause plastic items to discolor.

carrots, tomatoes or to‐

– Hollow items such as cups, glasses,

pans, etc. must b basket.

– Tall, narrow, hollow items, e.g.,

champagne glasses, should be placed in the cen ensure better water coverage.

– Concave items such as mugs or

bowls should be placed at an angle so that the wat

– The spray arms must not be blocked

ems which are too tall or hang

by it through the baskets. If in doubt, test for free movement by manually rotat‐ ing the spray arms.

e inverted in the

ter of the basket to

er can run off.

Loading the dishwasher

Items not recommended for dish‐ washing

– Wooden cutlery, cutting boards and

dishwar

– Craft items, antiques, valuable vases,

and decor

– Plastic items which are not heat-re‐

sistan dishwasher may cause them to melt or lose shape.

– Copper, brass, tin and aluminum

– Colors painted over a glaze may fade

aft

– Delicate glassware and glassware

con occur over time.

Please note: Silverware

silver polish may still be damp or spot‐

ted at the end of a program, where wa‐ ter has not run off smoothly. It may need to be rubbed dry with a soft cloth.

e or items with wooden parts

ative glassware

t: the high temperatures in the

ems may discolor or become matt.

er a number of washes.

taining lead crystal: clouding may

previously cleaned with a

Glass care

– Clouding may occur on glasses after

equent washing. If delicate glass‐ ware is washed in the dishwasher, ensure that only very low tempera‐ tures are used (see program chart), or a special glass-care program is used (depending on model). This will re‐ duce the risk of clouding.

– Purchase glassware which is dish‐

washer

– Use detergents with glass protective

additives (e.g., Miele CareCollection tabs).

– Visit "http://www.mieleglass‐

car english" for more information on glass care.

-safe (e.g., Riedel glassware).

e.com/international/en/glasscare/

Silver which has been in contact with foods contai These include egg yolk, onions, mayon‐ naise, mustard, fish, and marinades.

ning sulphur can discolor.

 Aluminum components (e.g.,

ange hood grease filters) must not

r be cleaned with a commercial or in‐ dustrial cleaning agent.

These may damage the material.

Tip: When pur and cutlery, make sure they are dish‐ washer-safe.

chasing new dishware

Loading the dishwasher

Loading examples

Loading for 10 standard place settings with cutlery tray

Upper basket

Cutlery tray (depending on model)

Lower basket

Loading the dishwasher

Loading for 16 standard place settings with cutlery tray

Upper basket Lower basket

Cutlery tray (depending on model)

Loading the dishwasher

Loading for 10 standard place settings with cutlery basket

Upper basket

Cutlery basket

Lower basket

Loading the dishwasher

Loading for 13 standard place settings with cutlery basket

Upper basket

Cutlery basket

Lower basket

Loading the dishwasher

Upper basket

 F

or safety reasons, do not oper‐ ate the dishwasher without the upper and lower baskets in place (except when running the Tall items program, if available).

 Use the upper bask

weight and delicate items such as cups, saucers, glasses, dessert bowls, etc. Shallow pans or casserole dishes can also be placed in the upper basket.

et for small, light‐

Adjustable cup rack (depending on model)

ise the rack to make room for tall

 Ra

items.

Glasses can be arranged along the po‐ siti

oning rail of the cup rack to give them some support during the pro‐ gram.

ower the cup rack and lean the

 L

glasses against it, or double stack smaller pieces.

Hinged spikes

The rows of spikes can be lowered to mak

e more room for larger items such

as casserole dishes.

 L

ong items such as soup ladles, mix‐ ing spoons, and long knives should be placed lying down across the front of the upper basket.

 P

ress the yellow lever downwards 

and then lower the spikes .

Loading the dishwasher

XXL cup rack (depending on model)

The cup rack can be set at two different widths so that it can also acc large cups.

 P

ull the cup rack upwards and click it back into position at the required width.

Glassware rack

This rail is designed to hold glasses with long

stems securely.

ommodate

 Y

ou can also move one of the side in‐ serts of the cutlery tray to make more room for tall glasses.

Adjusting the height

You can set the glassware rack at two differ

ent heights.

ull the rail upwards and click it back

 P

into position at the required height.

Use the low setting for small glasses and tumblers.

 L

ower the rail and lean tall glasses

against it.

Use the high setting for tall glasses and glasse

s with stems.

Loading the dishwasher

Adjusting the upper basket

In order to gain more space for taller it

ems the upper basket can be adjusted on three levels with 3/4" (2 cm) be‐ tween each level.

The upper basket can also be set at an angle with one side high and the other side low

. Make sure, however, that the basket can slide smoothly in and out of the cabinet.

ull the upper basket out.

 P

Dishwashers with cutlery basket

(see data p

Upper

bask

adjust‐

ment

Upper 7 7/8"

late for model number)

Plate 

Upper basket Lower

Stand‐

in inches (cm)

XXL

9 7/16"

(20)

(24)

basket

12 3/16"

(31) 13

3/4" (35*)

Middle 8

11/16"

10 1/4"

(26)

11 7/16"

(29)

(22)

Lower 9 7/16"

(24)

11" (28) 10 5/8"

(27)

Dishwashers with cutlery tray

(see data p

Upper

bask

adjust‐

ment

late for model number)

Plate 

Upper basket Lower

Stand‐

in inches (cm)

XXL

bask

To raise the upper basket:

 Lift the bask

et until it clicks into

place.

To lower the upper basket:

 P

ull upwards on the levers at either

side of the upper basket.

 Adjust the basket to the desired

height and then push the levers se‐ curely back down into position.

Depending on the setting of the upper bask

et, the following plate dimensions

can be accommodated.

Upper 7 7/8"

(15)

7 1/2"

(19)

12 3/16"

(31) 13

3/4" (35*)

Middle 6

11/16"

8 1/4"

(21)

11 7/16"

(29)

(17)

Lower 7 1/2"

(19)

* When tilted, plates of up to 13 3/4" (35 cm) can be accomm ket").

9 1/16"

(23)

odated (see "Lower bas‐

10 5/8"

(27)

Depending on the setting of the upper

et, a variety of plate dimensions

bask can be accommodated.

Loading the dishwasher

Lower basket

or larger and heavier items such as

 F

plates, serving platters, saucepans, bowls, etc. Glasses, cups and small items such as saucers can also be placed in the lower basket. Do not place thin, deli‐ cate glassware in the lower basket.

Removable MultiComfort insert

The rear section of the lower basket is used for washing cu pots and pans.

You can remove the MultiComfort insert t

o make more room for larger items

such as casserole dishes.

Removing the insert

ull the yellow handle forwards and

 P

remove the insert.

Refitting the insert

ps, glasses, plates,

 Place

When tilted, plates up to 13 3/4" (35 cm) in diamet

large platters and dishes in the

center of the lower basket.

er can be accommodated.

 Fi

t the insert into the lower basket

with the hooks under the long crosspiece .

 P

ress down on the insert until it clicks

into position .

Loading the dishwasher

Glass rack

 The

glass rack can be raised to make

more room for tall items.

 S

tem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.

You can set the glass rack at two differ‐ ent heights.

 Slide the gl

height until the catches click into place at the top.

ass rack to the desired

Glassware rack

This rail is designed to hold glasses with long

 Lower the rail and lean tall glasses

against it.

stems securely.

Loading the dishwasher

Hinged spikes

The spikes at the front are used for washing dessert bowls, and saucers.

The spikes can be lowered to make mor pans and dishes.

 P

plates, soup bowls, platters,

e room for large items, e.g. pots,

ress the yellow lever downwards ,

and then lower the spikes .

Bottle holder

The bottle holder can be used to wash na

rrow items, e.g., milk and baby bot‐

tles.

 If the bottle holder is not needed, lift

it up  and fold the sides down , as ill

ustrated.

Loading the dishwasher

Grates and filters

You can also wash Miele grates and

e range hood filters.

Miel  Select the Grates & Filters pr

optimum dishwashing results.

 P

rotruding parts can damage the

dishwasher. Load the dishwasher in such a way

that no side of the basket.

 Heav

damage the coating of the basket struts.

Load grates and filters carefully.

corners protrude over the

y and sharp wash loads can

ogram for

 Only place dishwasher safe

ele grates and filters in the dish‐

Mi washer.

Grates

 Rust d

Wash only grates that are undam‐ ag

ed and not rusty.

 Place

sition.

 L

oad the grate in the bottom basket. To do so, remove the MultiComfort insert and fold over the front row of spikes.

amages the dishwasher.

the upper basket in the top po‐

Loading the dishwasher

Filters

You can wash two range hood filters in the upper b basket at once. If you only want to wash two filters, put them in the upper basket.

asket and two in the bottom

Lower basket

Upper basket

 Be car

filters. At the end of the program, the filters may still contain hot water.

eful when unloading the

Cutlery

3D cutlery tray (depending on model)

 Arr

ange the cutlery in the tray as

shown.

To make unloading much easier, cutlery

ld be grouped in zones, one for

shou knives, one for forks, one for spoons, etc.

Spoon heads should be placed in con‐ tact with at least one of the serr tainers on the base of the cutlery tray to ensure that water runs off them freely.

The upper spray arm must not be

ed by items which are too big.

block

The side sections of the tray can be moved int tall items of dishware in the upper bas‐ ket.

o the middle to accommodate

ated re‐

Loading the dishwasher

If spoon handles do not fit between the hol

ders, lay them the other way round.

You can use the yellow slide to adjust the height of the middle section of the cutler

y tray to make more room for large items of cutlery, such as serving spoons and ladles.

Operation

Detergent

 O

nly use detergents formulated

for domestic dishwashers.

Refer to the manufacturer's packaging as t

o whether Tab products are suitable for the water hardness level in your area. Please note that the cleaning and dry‐ ing results of Tab detergents can vary greatly.

For optimum cleaning and drying re‐ sults, use Miel and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ ries."

e dishwasher detergent

Detergent dosage

 F

ollow the dosage recommended by

the manufacturer on the packaging.

 Unl

ess directed otherwise, use one detergent tab or add 1 1/4 - 2 table‐ spoons (20 - 30 ml) detergent to compartment II, depending on the level of soiling. With very heavy soil‐ ing you can also add a small amount of detergent to compartment l.

abs may not dissolve completely

 T

when the Express program (if availa‐ ble) is used.

Use only the recommended amount

ergent. Continued use of too

of det much detergent may cause machine damage.

 Dishwasher det

cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing.

Avoid inhaling or swallowing dish‐ washer det away from detergent. Keep deter‐ gent out of the reach of children. Keep children away from the dish‐ washer when the door is open. There could still be detergent residues in the dishwasher. Only add detergent just before starting the program and lock the door with the child safety lock (depending on model).

ergent. Keep children

ergents can

Adding detergent

 P

ress the opening catch on the de‐ tergent dispenser. The flap will spring open.

The flap is always open at the end of a pr

ogram.

Operation

 Add the required amount of detergent

and close the flap.

e sure that the detergent packag‐

 Mak

ing is properly closed after use to avoid it getting damp and becoming lumpy.

Dispensing aid

Compartment I holds a maximum of 2 t

easpoons (10 ml),

Compartment II holds a maximum of

3.5 tablespoons (50 ml) of detergent. The marks in compartment II indicate

evels of approximately 1 ¼ and 2

the l tablespoons (20 and 30 ml) respective‐ ly. The marks indicate the approximate fill level in ml when the door is open in a horizontal position.

Operation

Turning on

urn on the water supply if it is turned

 T

off.

 Open the door  Mak

e sure the spray arms are not ob‐

structed.

 Turn the dishwasher on using the 

sensor button.

The program menu of the last selected

ogram will appear in the display.

Selecting a program

Choose your program according to the type of load and the d

The different programs and their uses

e described in the Program Over‐

ar view chapter.

 Use the  arr

desired program and confirm with the

OK button.

The display will switch to the program menu.

Tap the  sensor butt more information about the program currently selected.

You can now select Options for your pr

ogram (see "Options").

To select a different program, tap the  sensor butt menu.

on to return to the main

egree of soiling.

ow buttons to set the

on to call up

Operation

Starting a program

tart the program by closing the door

 S

within four seconds of the last press of a sensor button.

The TimeControl function indicator light comes o been started.

If you do not close the door within four seconds, the message Press OK

to start will appear in the display

The program cannot be started until you ing the OK button and close the door within four seconds.

If you open the door, the message

Dishes can be added will appear in the

isplay. As long as this message is showing, dishware can be added without com‐ promising wash results.

 W

hot. Danger of scalding from water in

the cabinet.

Make sure you open the door very

car

A program should only be canceled

erwise important program stages

could be omitted.

n to show that a program has

confirm the message by press‐

ater in the dishwasher may be

efully.

the first few minutes, if at all. Oth‐

Time display

The estimated duration of the program

ed appears in hours and minutes

select in the display before the program be‐ gins. During the program, the time left until the end of the program is dis‐ played.

Each program stage is indicated by a symbol:

Pre-wash / Soak



Main wash



Interim rinse



Final rinse



Drying



Finish



The program duration displayed may var

y with the same program. It is influ‐ enced by, among other things, the wa‐ ter temperature at each intake, the re‐ activation process, the type of deter‐ gent, the amount of dishware, and the amount of soiling.

When a program is selected for the first time, the display shows an aver time for a cold water intake.

The times shown in the program over‐ view r

efer to standard test loads and

temperatures. Each time a program is run, the elec‐

onic module calculates the program duration required according to the tem‐ perature of the water taken into the dishwasher and the amount of dish‐ ware.

age

Operation

TimeControl

The TimeControl function lets you know how much lo run with the door shut.

All four indicator lights under the coun‐

er will come on when the program

t starts. They will go out one after the other from left to right in 20-minute in‐ tervals an hour before the end of the program to let you know how long the program still has left to run.

– 4 indicator lights:

rogram start / Time remaining ex‐

ceeds 60 minutes

– 3 indicator lights:

ime remaining 60-41 minutes

– 2 indicator lights:

ime remaining 40-21 minutes

– 1 indicator light:

ime remaining 20-1 minute

– All indicators off:

e program has finished

nger the program has to

Energy management

To save energy, the dishwasher will switch off aut ter the last time a button has been pressed or after the end of the program (see "Settings menu - Optimize stand‐ by").

 P

ress the  sensor button to turn the

dishwasher back on.

The dishwasher will not turn off while a pr

ogram is running, during the delay

start period, or if there is a fault.

omatically 10 minutes af‐

Operation

At the end of the program

At the end of a program, the TimeCon‐

ol function will go out with the door

tr shut. The buzzer might also be sounding.

The program has finished when End ap‐ pears in the display and the door has opened slightly (if applicable).

The drying fan may continue to run for a few minut gram.

You can now empty the dishwasher.

es at the end of the pro‐

 I

f you have deactivated the auto‐ matic door opening function (see "Settings menu - AutoOpen"), but would still like to open the door at the end of the program, make sure that you open the door fully.

Otherwise steam from the dishwash‐ er could damage the edge of the co

unter because the fan is no longer

running.

Operation

Turning off

At the end of a program:

 Open the door  The dishwasher can be turned off at

any time using the  sensor butt

Turning the dishwasher off during a pro‐

am stops the program.

gr Turning the dishwasher off during the

delay star ess.

If the dishwasher is not going to be used for a longer period of time, e.g., while should be closed.

t time will also stop the proc‐

on vacation, the water supply

on.

Unloading the dishwasher

Dishes tend to break and chip more

ly when they are hot. Allow the

easi dishes to cool until they are comforta‐ ble enough to handle before unloading them.

The dishes will cool much faster if you open the door when the pr ended.

First unload the lower basket, then the upper b tray (depending on model). This will prevent water drops from the upper basket and cutlery tray from fall‐ ing onto the dishes in the lower basket.

asket, and finally the cutlery

ogram has

Operation

Interrupting a program

The program will be interrupted as soon as you open the door After four seconds, the message Contin-

ue with OK will appear in the display.

 Confirm with OK and close the door

within four seconds.

The program will continue from the point at which it was int

ater in the dishwasher may be

 W

hot. Danger of scalding! Only open the door if absolutely nec‐

y and exercise extreme caution

essar when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the tem‐ perature in the wash cabinet to set‐ tle. After that, confirm the message with the OK and close the door with‐ in four seconds.

errupted.

Changing a program

If the detergent dispenser flap has alr

eady opened, do not change the

program.

If a program has already started and you wish t lows:

 Open the door  P  Confirm the message Cancel program?

with Yes.

The program will be canceled.  Select the Main Menu option. The display will revert to the main

menu.

 Selec  S

within four seconds.

The TimeControl function comes on to show that a pr

o change it, proceed as fol‐

ress the  sensor button.

t the desired program.

tart the program by closing the door

ogram has been started.

Options

In the program menu, you can select

ons" for the program you have se‐

"Opti lected.

 Open  T

 Se  Select the Options

All available options will be shown in the display

 Select the options you want using the

A check  will appear beside the extra to show that it has been set.

Options that cannot be combined will have a lock symbol  ne

 T

the door.

urn the dishwasher on using the 

sensor button.

lect a program.

option.

OK butt

o deselect an extra you have chos‐

en, simply press the

on.

xt to them.

OK button again.

Short

The Short e the programs in which this option is available by up to 30%. The selection of Short may have priority over other selected Extras.

In order to achieve optimum cleaning r

esults, energy consumption may in‐

crease slightly with this option. When used in combination with the

Rapid p a wash program without drying or auto‐ matic opening of the door (if available).

Extra economical

The Extra Economical e energy consumption of programs in which this option is available by up to 20%.

In order to achieve optimum cleaning r

esults, the program duration is extend‐

ed with this option.

xtra reduces the duration of

rogram, the Short extra results in

xtra reduces the

 When you have made all the settings,

confirm with Accept.

The display will change back to the pro‐ gr

am menu. The number of options selected will ap‐ pear in the program menu.

You can save the selected options for

espective program (see "Settings

the r menu - Save options").

Intensive lower rack

The Intensive Lower Rack e cleaning performance in the lower bas‐ ket in programs in which this option is available.

Energy and water consumption are in‐ cr

eased slightly due to the extended

wash duration in the lower basket.

xtra intensifies

Extra dry

The Extra Dry performance in programs in which this option is available.

Energy consumption is increased due t

o an extended fan running time and an

increased final rinse temperature.

Soak

The Soak ware with dried on soiling.

Energy and water consumption will in‐ cr

ease with this extra. If you are using powder dishwasher de‐

ergent, add approx. 5 g to compart‐

ment I.

Pre-Rinse

The Pre-Rinse e moving easily soluble soiling from dish‐ ware.

extra improves the drying

extra is used for soaking dish‐

xtra can be used for re‐

Options

Adding a pre-rinse will increase the pro‐

am duration and increase energy and

gr water consumption levels.

Options

Delay Start with EcoStart

There are three ways of delaying the

t of a program. You can set the start

star time or the finish time of a program. You also have the option of taking ad‐ vantage of time variable economy rates of electricity using the EcoStart function.

When using the Delay Start function,

e sure that the detergent com‐

mak partment is dry before adding deter‐ gent. Wipe dry with a cloth if neces‐ sary. If the compartment is wet, powder detergent can become lum‐ py and stick to the dispenser, with the result that it is not fully dis‐ pensed. Do not use liquid detergent when se‐ lecting Delay Start, as it can run into the dishwasher before it is required.

 Open the door  Turn the dishwasher on using the 

sensor button.

You then have a choice of Start at, End

at, and EcoStart.

 Select the function you want. Now enter the required time. If, while you are setting the time, you do

ess any buttons for several sec‐

not pr onds, the display will revert to the previ‐ ous menu. You will then have to enter your settings again. If you keep the relevant arrow button  pressed, the value shown will auto‐ matically increase or decrease.

If you open the door for more than four seco reached, the message Continue with OK appears in the display. Confirm with OK and close the door within four seconds t

nds before the start time is

o restart the delay start.

 Selec

 P

The  indica

t the program you want from

the main menu.

ress the  button.

tor light will light up.

Options

Start at

With the Start at function, you set the e

xact time at which you want the pro‐

gram to start.  Use the  arr

hour and confirm with OK.

The hour will be saved and the minute number block will

 Use the  arr

minutes and confirm with OK.

The display will switch to the program menu.

 Close the door within four seconds. The left TimeControl function will start

flashing. When the set time is reached, the pro‐

gram selected will begin automatically.

ow buttons to set the

be highlighted.

ow buttons to set the

Finish at

With the End at function, you set the time at which you end.

 Use the  arr

hour and confirm with OK.

The hour will be saved and the minute number block will

 Use the  arr

minutes and confirm with OK.

The display will revert to the program menu an appear.

 Close the door within four seconds. The left TimeControl function will start

flashing. A message will appear in the display if

the pr the set finish time because it has too long a running time.

The selected program will start auto‐ matical is reached.

d the estimated start time will

ogram cannot be completed by

ly when the estimated start time

wish the program to

ow buttons to set the

be highlighted.

ow buttons to set the

Options

EcoStart

The EcoStart function advantage of time variable economy rates of electricity. Before you can use this option, you must set up to three electricity rate time zones (see "Settings menu - EcoStart"). You then set the latest time at which the program selected should end. The dishwasher will start automatically in the cheapest rate zone within the time set.

 Use the  arr

hour and confirm with OK.

The hour will be saved and the minute number block will

 Use the  arr

minutes and confirm with OK.

The display will switch to the program menu.

 Clo

se the door.

The left TimeControl function will start flashing.

allows you to take

ow buttons to set the

be highlighted.

ow buttons to set the

Changing or deleting set times

You can change the set times or the pr

ogram before the start time in the dis‐

play is reached.

 Open the doo  P

ress the  button.

 Select the function for which you

o change or delete the time.

want t

After confirming the Change option, you can change the set time.

After confirming the Delete option, the set time will be delet cator light will go out.

You can now select and start a pro‐ gr

am.

If you open the door for more than four seco reached, the message Continue with OK appears in the display. Confirm with OK and close the door within four seconds t

ed and the  indi‐

nds before the start time is

o restart the delay start.

The estimated start time for the pro‐

am selected will appear in the display.

gr The selected program will start auto‐

matically during the most cost effective time zone the set finish time.

. It will finish at the latest by

Program overview

Program When to use Program sequence

Normal Program for regular use to com‐

plet

ely wash a full load of nor‐ mally soiled dishware with the ability to adjust energy and wa‐ ter consumption based on the soil load of the dishware.

Pots &

ans

China &

ystal

SaniWash To sanitize dishware, e.g. baby

Extra Quiet

Pre-wash To rinse dishes when a com‐

Express "Quick program" for lightly

For heavily soiled dishware and normally soiled pots, pans and ut

ensils with dried on residue; use 20% more detergent than recommended.

GlassCare program for tempera‐

e-sensitive glasses and

tur dishes with light soiling. Use 50% of the detergent amount.

bottles, cutting preparation dishware.

Extra quiet program for mixed loads with standar dried-on food residue with a longer program duration.

plet

e program is not needed.

soil

ed dishware, e.g. party dish‐ ware or to remove salt traces from the wash cabinet after re‐ filling salt; not suitable for deter‐ gent tabs.

boards and

d, slightly

Pre-

wash

If re‐

uired

2X X X X X

Main

wash

X X X X X

X 2X X X

X X X X

Interim

rinse

X If re‐

uired

Final rinse

X X

Drying

Program overview

Program When to use Program sequence

Economy Water and energy saving

ogram for standard dish‐ ware soiling that has not dried on, with a long soak‐ ing time and a low temper‐ ature.

Clean Machine

Tall Items For extra large, heat resist‐

Grates and filt

ers

Glasses No Rinse Aid

Energy Saver

Sensor‐ W

ash

Special cleaning program

o remove grease deposits

t from the dishwasher.

ant items, e.g. large vases. Remove upper basket.

Wash program for cleaning Miel

e grates and Miele

range hood filters. To wash glassware without

ergent and rinse aid;

det rinse cycle with warm wa‐ ter.

The water intake tempera‐

e must be 115°F (45°C)

tur for light to normally soiled dishware.

Program for dried-on re‐ mains and non-sensitive loads. T in-take, program duration and electricity consump‐ tion are automatically ad‐ justed to suit the level of soiling of the dishware.

emperature, water

Pre-

wash

X X X X

X 2X X X

X X X X X

X X X

2X X X X X

X X If re‐

Main wash

Interim

rinse

quir

Final rinse

X X

Drying

Consumption: The consumption values refer to a hot-water connection. Electric power: 0.01 - 1.5 kWh W

ater: 1.1 - 7.1 gal. (4 - 27 l)

Settings menu

Adjusting default values Opening the Settings menu

urn the dishwasher on with the 

 T

sensor button if it is turned off.

The main menu will appear in the dis‐ play

. If the Memory function is activated, the program menu for the program last se‐ lected will be displayed instead (see "Settings - Memory"). If this is the case, use the  sensor button to switch to the main menu.

To learn about the display, read the section with the same name.

 Select the Settings  option. The display will switch to the Settings

menu.  Selec

Press the  sensor butt information about the program cur‐ rently selected.

Sub-menu options which have already been select side them.

 T

The display will revert to the menu above.

t the option you want to

change.

on to see more

ed will have a check  be‐

o exit a sub-menu again, use the 

sensor button.



Settings menu

Language 

The display can be set to appear in one of sever

You can change the language in the display via the Language

 Select the language you want and

Some languages also have a country option t

 If so, select the app

The flag after the word Language acts as a guide if a language which you do not understand has already been set. If this is the case, keep selecting the option which has a flag after it until you reach the Language  sub-menu.

al different languages.

 sub-menu.

confirm this with OK.

o select.

ropriate country

and confirm your selection with OK.



Time of day

The current time of day must be set be‐

e you can use the Delay start option.

for

Setting the clock format

You can select either a 24-hour or 12hour clock.

 Select the Clock format option.  Select the setting you want and con‐

firm with OK.

Setting the clock

 Select the Set option.  Set the hour with the  arr

tons and confirm with OK. Then set the minutes and confirm with OK.

The time of day has now been saved.

ow but‐

Settings menu

Water hardness

This appliance is fitted with a water

ener.

soft The dishwasher must be programmed for the water hardness in your area.

– The dishwasher must be program‐

med for the wat area.

– Your local water supplier can tell you

the wat

er hardness level in your area.

– Where the water hardness fluctuates

e.g. between 10 - 16 gr/gal (10 15 °d),

always program the dish‐ washer to the higher value (16 gr/gal or 15 °d in this example).

 Select the water hardness level for

your area and confirm your selection with

OK.

A check  will appear beside the wa‐

er hardness which has been set.

°d gr/gal °f Display

1 1 2 1

2 2 4 2

3 3 5 3

4 4 7 4

5 5 9 5

6 6 11 6

7 7 13 7

8 8 14 8

9 9 16 9

10 10 18 10

er hardness in your

°d gr/gal °f Display

11 11 20 11

12 13 22 12

13 14 23 13

14 15 25 14

15 16 27 15

16 17 29 16

17 18 31 17

18 19 32 18

19 20 34 19

20 21 36 20

21 22 38 21

22 23 40 22

23 24 41 23

24 25 43 24

25 26 45 25

26 27 47 26

27 28 49 27

28 29 50 28

29 30 52 29

30 31 54 30

31 32 56 31

32 33 58 32

33 34 59 33

34 35 61 34

35 36 63 35

36 38 65 36

37-45 39--47 66-80 37-45

46-60 48-63 82-107 46-60

61-70 64-73 109-125 61-70

Settings menu

Rinse aid

You can adjust the rinse aid dosage for

esults.

best r The rinse aid dosage is set in stages from 0 to 6. It is set to 3 at the factory.

The rinse aid dosage can turn out to be

her than the set value due to the au‐

hig tomatic adjustment of the Sensor Wash program.

If spots appear on dishware and glass‐ war

e: – Increase the rinse aid dosage. If clouding or smearing appears on

dishwar – Decrease the rinse aid dosage.  Use the  arr

e and glassware:

ow buttons to set the

level you want and confirm with OK.

SensorWash

You can adjust the Sensor Wash pr gram so that it will remove stubborn soiling in a lightly soiled load.

 Select the setting you want and con‐

firm with OK.

o‐

AutoOpen

At the end of programs with a drying phase (e open automatically a little in order to help the drying process (see "Program overview"). In the ECO program (depending on mode), the door will open automatically during the drying phase.

This function can be deactivated if wished.

 Select the setting you want and con‐

 I

matic door opening function and would like to open the door as soon as the program has finished, make sure that you open the door fully. Otherwise steam from the dishwash‐ er could damage the edge of the counter because the fan is no longer running.

xcept Extra Quiet), the door will

firm with OK.

f you have deactivated the auto‐

Settings menu

Knock2Open

You can choose whether the door should open with 1 or 2 knocks.

 Select the setting you want and con‐

firm with OK.

This function can also be disabled, in which

case the door has to be fitted

with a handle to open it.

BrilliantLight

This dishwasher has interior lighting. When the door is open, the lighting will switch off aut nutes.

The interior lighting can be switched off.

 Select the setting you want and con‐

firm with OK.

omatically after 15 mi‐

Optimize Standby

The dishwasher is supplied with the Op-

timize standby

standard. To save energy, the dishwasher will

switch off aut after the last time a button has been pressed or after the end of a program.

The dishwasher will not switch off in the event of a fault.

Optimize Standby can be switched off if you pr

efer. If you do this the duration before the dishwasher switches off au‐ tomatically increases to 6 hours. Doing this will increase energy consumption.

 Select the setting you want and con‐

firm with

function switched on as

omatically a few minutes

OK.

Settings menu

Refill indicators

If you consistently use a Tab detergent and the r aid are bothering you, you can deacti‐ vate them if you wish.

 Select the setting you want and con‐

If you switch to using detergent that does not contain salt or rinse aid, it is impor dishwasher salt and rinse aid and to switch the indicators back on.

efill indicators for salt and rinse

firm with OK.

tant to remember to add

Check filters

You can adjust the interval at which the message ters appears. You can set an interval between 30 and 60 program cycles.

The "Check filters" message is set at the fact gram cycles.

to remind you to check the fil‐

ory to appear after every 50 pro‐

Changing the main menu

You can change the order of the pro‐

rams in the program selection menu

g and also enter your favorite programs into the first two program places.

 Se

lect the programs you want to place in the first and second position of the program selection menu.

 Confirm each position with OK. The programs you have selected will

then appear together in the display.  If you ar

which they are shown, confirm with

OK.

o change the order in which they are

 T

shown, select Change main menu.

Enter the settings again.

e happy with the order in

 Selec

t the interval you want and con‐

firm this with OK.

Settings menu

Saving options

Additional program options can be add‐

o some programs, e.g., Short (see

ed t "Program options - Options").

You can use the Save options save settings you have chosen for a particular program so that they are au‐ tomatically selected when you run the program in the future.

The dishwasher is delivered with this functio

 Select the setting you want and con‐

n deactivated.

firm with OK.

option to

Temperature

You can set whether the temperature should be displayed in °C/Celsius or °F/ F

ahrenheit.

The factory default setting is °C.  Select the option you want and con‐

firm with OK.

Brightness

There are seven different display bright‐ ness settings.

 Select the brightness you want and

confirm this with OK.

Volume

A sequence of buzzer tones will sound at the end of the pr fault as long as the buzzer has been ac‐ tivated.

Buzzer in the event of a fault

The buzzer in the event of a fault will

d four times at intervals with a

soun short pause between each set of tones.

The buzzer which sounds when there is a fault can

Buzzer at the end of a program

The buzzer at the end of a program will soun

d four times at intervals with a

short pause between each set of tones.

Buzzer tones

The volume of the tone at the end of the pr

ogram can be selected in seven

stages or switched off.  Select the volume you want using the

Quieter

buzzer off.

 Confirm with OK.

Night time buzzer tone

You can select a different volume for the buzz

and Louder options, or turn the

er at night, or turn it off.

ogram or if there is a

not be deactivated.

 Select the volume you want for the

nig

ht time buzzer using the Quieter and Louder options, or switch the night-time buzzer off.

 Confirm with OK.

Settings menu

Night time

You can select the times for night time t

o begin and end.

 Select the Start at option.  Use the  arr

time in hours and minutes for the night time to begin and confirm both with OK.

 Select the Finish at option.  Use the  arr

time in hours and minutes for the night time to end and confirm both with OK.

Keypad tone

An audible tone sounds each time a sensor butt

The volume for the keypad tone can be set in seven stages or switched off.

 Select the volume you want using the

Quieter and Louder options, or switch

the keypad tone off.

 Confirm with OK.

ow sensors to set the

on is pressed.

Memory

With the Memory function activated, the dishwasher will save gram selected. When you switch the dishwasher off and back on again, the last program se‐ lected will appear in the display instead of the main menu.

 Select the setting you want and con‐

firm with OK.

the last pro‐

RemoteVision

(Op

tional accessory.

To learn more about RemoteVision visit

ww.miele.com.)

Refer to the RemoteVision Installation manua

l for further instructions.

Version info

You can call the electronic software ver‐ sion

of your dishwasher for technical

support purposes.  Confirm the display with OK.

Settings menu

EcoStart

In order to run your dishwasher in the most economical way, you can use the

EcoStart

your electricity supplier's time variable rates (see "Options - Delay start with EcoStart - EcoStart"). With this option selected, your dish‐ washer will start automatically at your electricity supplier's cheapest rate times.

To use this function, you must first set up t which the dishwasher can start. You can allocate different priorities to these time zones. The time with the cheapest electricity rate will be given Priority 1.

Contact your electric supplier to find out the times of the cheapest electricity r

ates.

Once the electricity rate times have been set, you can use the EcoStart op‐ tio for each program. The dishwasher will then start automati‐ cally in the cheapest electricity rate time and the program will end at the lat‐ est at the finish time set.

option to take advantage of

o three electricity rate time zones in

n to set the latest finish time required

Setting the electricity rate times

Before you can use the EcoStart option, yo

u must set at least one electricity rate

time.  Selec

The start of the electricity rate time se‐ lect hour number block will be highlighted.

 Use the  arr

The end of the electricity rate time se‐ lect hours number block will be highlighted.

 Use the  arr

The electricity rate time will be saved and its priority will appear in the dis‐ play

 Select the priority you want and con‐

 Confirm the message with OK.

The electricity rate time will be activat‐ ed.

t an electricity rate time from

R1-R3 to set.

ed will appear in the display and the

ow buttons to set the hours and minutes for the start time and confirm both with OK.

ed will appear in the display and the

ow buttons to set the hours and minutes for the end time and confirm both with OK.

firm this with OK.

Settings menu

Changing the electricity rate times

You can change the start, finish or pri‐ ority of an ele

 Selec

R1-R3 to change.

 Selec

change.

 Use the  arr

the setting and confirm with OK.

The change will be saved.

ctricity rate time.

t an electricity rate time from

t the setting you want to

ow buttons to change

Deleting the electricity rate times

 Y

ou can delete the settings for an electricity rate time and in doing so deactivate the EcoStart option for this time zone.

 Selec

 Select Delete.  Co

The settings for the electricity rate time select

 Confirm the message with OK. The electricity rate time has now been

delet

t an electricity rate time from

R1-R3 to delete.

nfirm the query Delete rate R1? with

Delete.

ed will be reset.

ed.

Settings menu

Showroom program

For demonstration purposes only.

The dishwasher is fitted with various demonstr use.

– Demo mode

P demonstrate the TimeControl func‐ tion.

– Demo with sound

T pump to demonstrate the sound of the dishwasher.

– Demo Drying Plus

– BrilliantLight

ation programs for showroom

rogram for use in showrooms to

his program activates the circulation

e door will open automatically.

e interior lighting is on constantly.

Factory default settings

You can reset all settings to the factory default settings.

You will be given the choice of Appliance

settings reset or Main menu.

 Selec  Confirm the message Reset settings?

t the desired menu item.

or Reset main menu? with Yes.

Closing the Settings menu

To close the Settings  menu, use the 

sensor. This will take you back to

the main menu.

Cleaning and care

Check and clean your dishwasher regularly. This will help avoid prob‐ lems and faults.

 All sur

scratching. Contact with unsuitable cleaning

ents can alter or discolor all surfa‐

ces.

faces are susceptible to

Cleaning the wash cabinet

Generally, the wash cabinet is self

ning if the correct amount of deter‐

clea gent is used.

If, however, there are lime scale or

ease deposits in the cabinet, these

gr can be removed with a special dish‐ washer cleaner (see "Optional accesso‐ ries"). Follow the instructions on the packaging.

If you mainly use low temperature pro‐

ams (< 120°F/50 °C), there is a risk of

gr bacteria and unpleasant odors building up in the wash cabinet. To prevent this happening the dishwasher will automat‐ ically increase the temperature in the fi‐ nal rinse of the selected program after several programs using low tempera‐ tures have been run.

Cleaning the door and the door seal

Bacteria could build up on the door seal and the sides of the dishwasher door as these wash cabinet and are not accessed and cleaned by the spray arm jets.

 W

ipe the door seals regularly with a

damp cloth to remove food deposits.

 W

ipe off any food or drink residues which may have dripped onto the sides of the dishwasher door before closing it.

surfaces are outside the

Cleaning the control panel

 The

control panel should only be

wiped with a damp cloth.

Cleaning the indicator reflector panel

The indicator reflector panel for the Op‐ ti

cal Interface / TimeControl function (depending on model) is situated in the cover plate underneath the counter.

e indicator reflector panel should

 Th

only be wiped with a damp cloth or a suitable cleaning agent designed for use on plastic.

 Clean the filters in the wash cabinet

regularly.

Cleaning and care

Cleaning the door front

 I

f soiling remains longer, it may happen that the surfaces can be‐ come discolored or changed.

Remove any soiling immediately.

 Cle

an the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge. Wipe the surfaces dry using a soft cloth.

lass cleaners may be used to

 G

clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface.

Remove the cleaner promptly.

To better maintain your appliance avoid the following:

– Cleaning products containing soda,

ammonia, acid, or chloride – Descaling agents – Abrasive cleaning products, such as

scouring powder, scouring liquid, or

pumice stones, – Cleaners containing solvents – Stainless steel cleaners – Dishwasher cleaner – Oven cleaners – Glass cleaner – Hard, abrasive brushes or sponges,

e.g., pot scour

es which have been previously used

with abrasive cleaning agents – Eraser sponges – Sharp metal scrapers

ers, brushes or spong‐

– Steel wool – Steam cleaning appliances

Cleaning and care

Filter system

The filter system in the base of the wash cabinet pr redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects.

events food from being

 This dishwasher must not be

sed without all the filters in place!

Collection of coarse soil may cause the

ers to clog. The level of soiling and

filt time it takes before the filters need cleaning will vary depending on use.

The message Check filters will appear in the d

isplay after every 50 program cy‐

cles (factory default setting). You can set the interval for the "Check

filt

ers" message to appear to a value between 30 and 60 program cycles (see "Settings menu - Check filters").

ck the filter system.

 Che  Cle

an it if necessary.

 Then confirm the message with OK. The message will disappear.

The display will ch program selection menu.

ange to show the

Filter system

urn the dishwasher off.

 T

urn the handle counter-clockwise to

 T

release the filter system .

 Lift the filt

washer . Remove any coarse parti‐ cles and rinse the filter well under running water. Use a nylon brush if necessary.

 E

get into the circulation system and cause a blockage.

er system out of the dish‐

nsure that course soil does not

Cleaning and care

To clean the inside of the filter, the flap must be opened:

 P

ress catches  together in the di‐

rection of the arrows as shown, and

open the filter .

se all the filters under running wa‐

 Rin

ter.  Then close the flap so that the catch

engages.

 Replace

lies flat in the base of the wash cabi‐ net.

 Then turn the handle clockwise until

both arr er. This will lock the filter system in place.

 T

the filter system that it is secured in position correctly.

Otherwise coarse soil could get into the ci blockage.

the filter system so that it

ows point towards each oth‐

ake care when you are fitting

rculation system and cause a

Cleaning and care

Cleaning the spray arms

Particles of food can get stuck in the

ay arm jets and bearings. The spray

spr arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months).

urn the dishwasher off.

 T Remove the spray arms as follows:

ake out the cutlery tray (if your dish‐

 T

washer is fitted with one).  P

ush the top spray arm upwards to engage the inner ratchet. Then un‐ screw the spray arm.

ull the lower spray arm firmly up‐

 P

wards to remove it.

ush the middle spray arm upwards

 P

 to engage the ratchet. Then un‐ screw the spray arm .

 Remo

ve the lower basket.

 Use a point

food particles that are stuck in the spray arm jets into the spray arm.

 Rin

se the spray arms thoroughly un‐

der running water.

 Replace the spray arms and check

that they rotate freely.

ed object to push the

Frequently Asked Questions

With the help of the following guide, minor faults in the performance of the appli‐ ance, some contacting Miele Service. This will save time and money.

The following guide may help you to find the reason for a fault, and to correct it. Y

ou should, however, note the following:

 Unauthorized or incorrect repairs could cause personal injury or damage to

the appliance. Repair work to electrical appliances must only be carried out by a suitably

quali tional safety regulations. The manufacturer cannot be held liable for unauthor‐ ized work.

Technical problems

Problem Possible cause and solution

The dishwasher does

ot start.

of which may result from incorrect operation, can be put right without

fied and competent person in strict accordance with current local and na‐

The door is not properly closed.

 Raise the door upwar

The dishwasher is not plugged in.

 Inser

The circuit breaker has tripped.

 Reset the fuse (see data p

t the plug.

rating).

ds until the catch engages.

late for the correct fuse

The dishwasher stops durin

g a program.

After the program has

ted, the Optical In‐

star terface is not visible.

The dishwasher is not switched on.

urn the dishwasher on with the  button.

 T

The circuit breaker has tripped.

 Reset the fuse (see data p

rating).

the circuit breaker trips again, contact Miele

 If

Service.

The indicator reflector panel was not correctly fitted.

 Refit the indicat

installation plan).

or reflector panel correctly (see the

late for the correct fuse

Frequently Asked Questions

Problem Possible cause and solution

All TimeControl func‐ tion

controls are flash‐ ing quickly. The warning buzzer is sounding. One of the following faults appears in the display:

 Technical fault FXX

 Waterproof fault

 Technical fault F78

Before fixing the fault:

urn the dishwasher off using the  sensor but‐

 T

ton.

There may be a technical fault. After a few seconds:

urn the dishwasher back on.

 T  Selec  Clo

If the error message is displayed again, there is a t

echnical fault.

 Co

The WaterProof System has reacted.

 T  C

A fault has occurred in the circulation pump.

 T

 T  Selec  Clo

If the error message is displayed again, there is a t

echnical fault.

 Co

t the desired program.

se the door.

ntact Miele Service.

urn off the water supply.

ontact Miele Service.

urn the dishwasher off for at least 30 seconds

with the  sensor button.

urn the dishwasher back on.

t the desired program.

se the door.

ntact Miele Service.

Frequently Asked Questions

Problem Possible cause and solution

All TimeControl func‐ tion

controls are flash‐ ing quickly. The warning buzzer is sounding. One of the following faults appears in the display:

Fault auto. door closing The door is sometimes obstructed by an item inside

Fault auto. door opening There may be a technical fault.

Before fixing the fault:

urn the dishwasher off with the  button.

 T

the appliance.

his is the case, remove the item and switch the

 If t

dishwasher on again.

 If the same message appears again, contact Miele

vice.

Ser

en the door manually.

 Op  If the same message appears again, contact Miele

vice.

Ser

Frequently Asked Questions

Water intake fault

Problem Possible cause and solution

All TimeControl func‐ tion

controls are flash‐ ing quickly. The warning buzzer is sounding. One of the following faults appears in the display:

 Water intake fault.

Please open the water supply

 Water intake fault

The following message appears in the display during the Energy Saver pr

ogram:

 Water in. temp too low

The water supply is turned off.

urn on the water supply all the way.

 T

Before fixing the fault:

urn the dishwasher off using the  sensor but‐

 T

ton.

There is a problem with the water intake.

urn on the water supply fully and start the pro‐

 T

gram again.

 Clean

 The wat

the water intake filter (see "Frequently asked

questions").

er pressure at the intake is lower than 7.25 psi. Contact a plumber.

The intake water has not reached the required tem‐ p

erature of 120°F (45°C) (see "Water connection -

Water intake").

 Start the program again.  If the fault message appears again, select a differ‐

ogram.

ent pr

Frequently Asked Questions

Water drainage fault

Problem Possible cause and solution

All TimeControl func‐ tion

controls are flash‐ ing quickly. The warning buzzer is sounding. The following fault ap‐ pears in the display:  Drain fault

Before fixing the fault:

urn the dishwasher off with the  button.

 T

There is a problem with the water intake. Ther

e might be water in the wash cabinet.

 Clean

 Remove any ki

the filter system (see "Cleaning and care -

Filter system").

the drain pump (see "Frequently asked

questions").

the non-return valve (see "Frequently asked

questions").

nk or loop in the drain hose.

Frequently Asked Questions

General problems

Problem Possible cause and solution

The door will not open whe

n knocked.

The TimeControl func‐

control is flashing

tion quickly. The warning buzzer is sounding.

Press OK to start or Continue with OK appears in

the display. The dishwasher does not start or the Flexi‐ Timer stops running.

The interior lighting does not switch on when the door is opened.

Detergent residue is left in the dispenser at the end

of a program.

The dispenser cover cannot be closed.

The inside of the door and/or the int

erior walls are wet after a program has finished.

The Knock2open function has been disabled.

 Switch the door opening mechanism on again (see

"Settings menu - Knock2Open").

If the door will still not open or if there is a power fail‐ ur

e, the door can still be opened with the door open‐ ing device supplied (see "Before using for the first time - Emergency door opener").

The safe mode of the dishwasher was activated. The following takes place:

– If you do not close the door within four seconds

of the last pr

ess of a sensor button at program

start

– If the door is open for longer than four seconds

during

a program or within the delay start time

 Confirm with OK and close the door within four

seconds.

The interior lighting has been switched off.

 Switch the lighting back on again (see "Settings

menu - BrilliantLight").

The dispenser was still damp when detergent was added.

 Mak

e sure the dispenser is dry before adding de‐

tergent.

Detergent residue is blocking the latch.

 Remo

ve the detergent residue.

This is caused by the drying system and does not in‐ dic

ate a fault. The moisture will dissipate after a

while.

Frequently Asked Questions

Problem Possible cause and solution

Water remains in the wash cabinet at the end of a pr

ogram.

Before fixing the fault:

urn the dishwasher off using the  sensor but‐

 T

ton.

The filter system in the wash cabinet is clogged.

 Clean

The drain pump or non-return valve is blocked.

 Clean

The drain hose is kinked.

 Remove the kink.

the filter system (see "Cleaning and care -

Filter system").

the drain pump or the non-return valve (see

"Frequently asked questions").

Frequently Asked Questions

Noises

Problem Possible cause and solution

There is a knocking noise in the wash cabi‐ net.

There is a rattling noise in the wash cabinet.

There is a knocking noi

se from the water

pipe

A spray arm is hitting the dishware.

errupt the program, and rearrange the items

 Int

which are obstructing the spray arm.

Dishware is moving around in the wash cabinet.

errupt the program and rearrange loose pieces.

 Int

A foreign object (e.g., a cherry pit) has become lodged in the dr

 Remove the for

(see "Maintenance - Cleaning the drain pump and non-return valve").

This may be caused by the installation or the diame‐ t

er of the water pipe.

 This has no influence on dishwasher function. If in

doubt,

ain pump.

eign object from the drain pump

contact a suitably qualified plumber.

Frequently Asked Questions

Poor cleaning results

Problem Possible cause and solution

The dishes are not clean.

The dishes were not loaded correctly.

notes in "Loading the dishwasher".

 See

The program was not powerful enough.

 Select a mor

overview").

There is some stubborn soiling even though most of the dishwar stains).

 Use the Sensor Wash program option (see "Set‐

tings menu - Sensor wash").

Not enough detergent was dispensed.

 Use mor

Items are blocking the path of the spray arms.

 Rearr

The filter system in the base of the wash cabinet is not cle This may cause the spray arm jets to get blocked.

 Clean  Clean

ange the items so that the spray arms can

rotate freely.

an or is not correctly fitted.

and/or fit the filter system correctly. the spray arm jets if necessary (see "Clean‐

ing and care - Cleaning the spray arms").

e intensive program (see "Program

e is only lightly soiled (e.g., with tea

e detergent, or change your detergent.

Smearing appears on glass

ware and cutlery. There is a bluish sheen on the surface of glass‐ ware; film can be wiped off.

The non-return valve is open and blocked. Dirty water has flowed back int

 Clean

The rinse aid dosage is set too high.

 Reduce the dosage (see "Settings menu - Rinse

the drain pump and the non-return valve

(see "Frequently asked questions").

aid").

o the wash cabinet.

Frequently Asked Questions

Problem Possible cause and solution

Dishware is not dry or cutler

y and glasses are

spotty.

Glasses have a brown‐ ish-blu the deposit cannot be wiped off.

Glasses are dull and discolored; the deposit cannot be wiped off.

Tea or lipstick stains have not been com‐ p

e discoloration;

letely removed.

The rinse aid dosage is set too low or the rinse aid r

eservoir is empty.

 Replenish

change the brand of rinse aid (see "Before using for the first time - Rinse aid").

Dishware was taken out of the cabinet too soon.

eave it in for longer (see "Operation").

 L

Combination tabs have been used which have im‐ pair

ed drying performance.

 Chang

(see "Before using for the first time - Rinse aid").

Detergent deposits.

 Switch

The glassware is not dishwasher-safe. The surfaces are affected.

 Ther

Purchase glassware which is dishwasher-safe.

The wash temperature of the selected program was t

oo low.

lect a program with a higher wash temperature.

 Se

the reservoir, increase the dosage, or

e your detergent, or replenish the rinse aid

to another detergent.

e is no remedy.

Plastic parts are discol‐

ed.

The bleaching effect of the detergent is too low.

 Switch t

Natural dyes, e.g., from carrots, tomatoes, or ketchup may be the cause. The amo its bleaching effect was not sufficient to deal with natural dyes.

 Use mor

Discoloration is irreversible.

o another detergent.

unt of detergent used or

e detergent (see "Operation - Detergent").

Frequently Asked Questions

Problem Possible cause and solution

White residue is visible on

dishware and cut‐ lery, clouding occurs on glassware; this film can be wiped off.

There are rust stains on the cutler

The rinse aid dosage is too low.

ease the dosage (see "Settings menu - Rinse

 Incr

aid").

The salt reservoir is empty.

the salt reservoir (see "Before using for the first

 Fill

time - Dishwasher salt").

The salt reservoir cap has not been screwed on cor‐

ectly.

 Replace it, making

correctly.

An unsuitable Tab detergent has been used.

 Chang

The water softener is programmed to too low a water har

 P

The affected items are not corrosion resistant.

 Ther

e your detergent.

dness level.

rogram the water softener to a higher water hard‐

ness level (see "Settings menu - Water hardness").

e is no remedy.

Purchase cutlery which is dishwasher-safe.

sure that it screws back on

A program was not run after dishwasher salt was added.

 Always run the Exp

The salt reservoir cap has not been screwed on cor‐ r

 Replace it, making

Traces of salt have got into the wash cycle.

ress program with the Short program option selected and without any dishware in the dishwasher after adding dishwasher salt.

ectly.

sure that it screws back on

correctly.

Frequently asked questions

Cleaning the drain pump and non

-return valve

If the water has not been pumped away at the end of a p or the non-return valve might be blocked. They are, however, easy to clean.

 T

urn off the dishwasher and pull the

plug.

 T

ake the filter system out of the wash cabinet (see "Cleaning and care Cleaning the filters").

 Scoo

p the water out of the cabinet

using a suitable container or utensil.

rogram, the drain pump

The drain pump is beneath the non-re‐ turn valve (see arr

 Remo

ve all foreign objects from the drain pump (glass or bone splinters). Before returning the non-return valve, check that the drain pump is not blocked. Spin the propeller sever‐ al times in both directions to check for obstructions.

ow).

ress the catch for the non-return

 P

valve inwards .

 Lift the no

 and rinse well under running water.

 Remo

non-return valve.

n-return valve up and out

ve all foreign objects from the

 C

arefully reinsert the non-return valve

and secure it with the locking clamp.

 Mak

clicks into place!

 Be car

delicate components when cleaning the drain pump and the non-return valve.

e sure the locking clamp

eful not to damage any

Customer service

Repairs

For problems that you cannot resolve on your own, please contact:

– your Miele dealer or – Miele Service

The telephone number for Miele is li

sted at the back of these instruc‐

tions.

In the event of a fault which you cannot

ect yourself please contact the

corr Miele Service Department at the phone number on the back of this booklet.

Warranty

For more information, please refer to the incl

uded warranty.

MieleCare (USA only)

MieleCare, our Ext

tract program, gives you the assurance of knowing that your appliance invest‐ ment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. On‐ ly genuine Miele parts installed by fac‐ tory trained professionals can guaran‐ tee the safety, reliability, and longevity of your Miele appliance.

Please note that unless expressly ap‐

oved in writing by Miele’s Service de‐

pr partment, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthor‐ ized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.

ended Service Con‐

To learn more about MieleC ed Service Contracts, please contact your appliance dealer or visit us online at:

http://www.mieleusa.com

are Extend‐

Optional accessories

Dishwasher detergent and rinse aid, as well as clea available as optional accessories. All the products are designed for use with Miele dishwashers.

These and many other useful products can be or from Miele (see end of this manual for contact details).

ning and care products, are

dered via the Miele website or

Dishwasher detergent, rinse aid, and salt

When you decided to buy a Miele dish‐

r, you chose excellent quality and

washe performance. However, ensuring that your dishwasher always delivers the best possible results will also depend on your choice of dishwasher deter‐ gent, rinse aid, and dishwasher salt, as cleaning results can vary depending on the brand used. With Miele CareCollection products, you can be sure of optimum results as these products have been specially de‐ signed for Miele dishwashers.

Detergent tabs

– Sparkling results even with stubborn

food deposits

– Combination product with other

components such as rinse aid, salt, and gla

– Phosphate-free - safe for the envi‐

– Water-soluble wrapping - no need to

unwrap

Rinse aid

– For gleaming glasses – Helps dishware to dry – With glass protection against corro‐

sion

– Specially designed cap for precise,

easy dispensing

Dishwasher salt

– Prevents lime scale on dishware and

in the appliance

– Extra coarse-grained

ss protection additives

onment

Optional accessories

Dishwasher care products

Miele cleaning and care products pro‐ vide optimum car

Dishwasher cleaner

– Cleans the dishwasher effectively

and thor

– Removes grease, bacteria, and un‐

pleasant odors

– Ensures excellent dishwashing re‐

sults

Dishwasher descaler

– Removes heavy lime scale deposits – Mild and gentle with natural citric

acid

Dishwasher conditioner

– Removes odors, lime scale, and light

deposits

– Maintains the elasticity and leak

tightness of the seals

e for your dishwasher.

oughly

Accessories

Some accessories may be supplied as standar

Cappuccinatore insert

The Cappuccinatore insert can be used for clean Miele Cappuccinatore in the dishwash‐ er.

Cutlery basket

The cutlery basket is placed in the low‐ er bask ditional items of cutlery.

Glassware rack

This rail is designed to hold glasses with st

d, depending on model.

ing the individual parts of the

et and can be used to wash ad‐

ems securely in the lower basket.

Dishwasher freshener

– Neutralizes unpleasant odors – Fresh, pleasant lime and green tea

scent

– Easy to attach to the dishwasher

bask

– Very economical, lasts for 60 wash

cycles

Installation Instructions

Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional

instructions.

Information is subject to change. Please refer to our website to obtain the most

ent product specification, technical & warranty information.

curr

Electrical connection

Installation, repairs and other work by unqualified persons could be dange

rous.

Check that the voltage, frequency and fuse r plate match the household mains supply.

The power outlet must be accessible aft

er installation. Do not use an ex‐ tension cord to connect the dish‐ washer to the mains. Danger of over‐ heating! See data plate on the right side of the door.

A damaged power cord must only be

eplaced with a genuine Miele cord

r by a Miele service technician.

ating shown on the data

Grounding instructions

THIS APPLIANCE MUST BE GROUNDED.

In the event of a malfunction or break‐ down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electrical cur‐ rent. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropri‐ ate outlet that is installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equip‐ ment grounding conductor can result in electric shock.

Do not modify the plug provided with the appliance; if it will not fit the out‐ let, have a pr a qualified electrician.

If there is any question concerning the pr

oper electrical connection or grounding of this appliance to the powersupply, please consult a li‐ censed electrician or call Miele’s Technical Service Department: USA: 1-800-999-1360 CDN: 1-800-565-6435

Specifications

The dishwasher comes equipped with a 4 ft (1.2 m) the rear of the dishwasher) with a mold‐ ed plug for connection to 120 V, 60 Hz, 15 A grounded receptacle.

oper outlet installed by

powercord (measured from

Electrical connection

Hardwired electrical connection

It is p

ossible to hardwire this appliance

to an existing power cable.

CAUTION: Before servicing, discon‐ nec

t the power supply by either re‐ moving the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should on

ly be performed by a qualified technician in accordance with all ap‐ plicable codes and standards. Re‐ pairs and service by unqualified per‐ sons could be dangerous and the manufacturer cannot be held re‐ sponsible.

Before connecting the appliance to the power supply, mak voltage and frequency listed on the data plate correspond with the household electrical supply. This da‐ ta must correspond to prevent ma‐ chine damage. Consult an electrician if in doubt.

e sure that the

Prior to making a hardwire connec‐ tion to the terminal, remove the pow‐ ercord. Otherwise there will be a risk of electric shock from the attached plug.

An existing flexible supply cord or cable shall have a minimum thickness of A

WG 14. 120 V, 60 Hz, 15 A fuse rating Black wire (live): connect to L White wire (neutral): connect to N Green wire (ground): connect to 

After attaching the permanent power

supply cor

the terminal block and the strain re‐

lief are tightened.

d, check that all screws on

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE GROUNDED

This appliance must be connected to a

ounded metal, permanent wiring sys‐

gr tem, or an equipment-grounding con‐ ductor must be run with the circuit con‐ ductors and connected to the equip‐ ment-grounding terminal or lead on the appliance.

Water connection

Connection to the water sup‐ ply

ater in the dishwasher must

 W

not be used as drinking water.

– The dishwasher may be connected to

d or hot water supply up to a

a col maximum of 140°F/60°C. We would only recommend connec‐ tion to a hot water supply if it is eco‐ nomical, e.g. a solar-powered supply. When connected to a hot water sup‐ ply, all program stages which would otherwise be carried out with cold water will be carried out with hot wa‐ ter.

– The Energy Saver pr

ble) requires a hot water supply be‐ tween 115°F/45°C (minimum) and 140°F/60°C (maximum). The higher the water intake tempera‐ ture, the better the cleaning and dry‐ ing results.

ogram (if availa‐

– Water pressure: Must be between

7.25 - 145 psi (0.5 - 10 bar) If the wa‐ t

er pressure is lower than this, the fault message Intake will appear in the display (see "Frequently asked questions"). If the water pressure is too high, a pressure reducer valve must be fitted.

After connecting the dishwasher to the wat ter intake is airtight.

 T

pliance, the dishwasher must only be connected to fully vented pipework.

 The intak

shortened or damaged in any way as it contains electrical components.

er supply, check that the wa‐

o avoid any damage to the ap‐

e hose must not be

– The intake hose is approx. 4' 11"/

1.5 m lon al extension hose (pressure tested to 2,030 psi) is available as an optional accessory, if required.

– A faucet with a 3/8" male thread

must be pr

– This appliance is constructed to

comply with ANSI/ASSE 1001 // IEC/EN/DIN 61770 600, and may be connected to a suit‐ able supply without an extra non-re‐ turn valve if national regulations per‐ mit.

g. A 1.5 m long flexible met‐

ovided on site.

// VDE 0700 Part

Water connection

Drainage

– The machine comes equipped with a

in non-return valve on the dis‐

builtcharge side to prevent waste water from flowing back into the dishwash‐ er.

– Take the drain line of the dishwasher

and attach the dr possible under the counter rim of the kitchen sink before connecting the end to the drain. The loop will serve to prevent a backed up drain or large volume of water in the sink from si‐ phoning back into the dishwasher.

– The dishwasher is supplied with ap‐

ox. 5' 11" (1.5 m) of flexible drain hose with an internal diameter of 7/8" (22 mm).

– The drain hose can be extended us‐

extensions and adapters. The

ing drainage length must not be longer than 13' 1 1/2" (4 m) and the delivery head must not exceed 3' 3 3/8" (1 m).

ain line as high as

 Mak

kinks in the hose, and that it is not squashed or stretched.

After servicing the appliance, ensure that the dr

Venting the drain

If the on-site drain connection is situat‐ ed lower than the guide path for the bott the drain must be vented. Otherwise a siphoning effect during a program can cause the appliance to empty itself of water.

 To vent: open the dishwasher door

fully.

e sure that there are no

ain does not leak.

om basket rollers in the open door,

– If the hose is to be directly fitted to

the dr

ainage outlet on site, use the hose clip supplied (see installation di‐ agram).

– The hose can be directed to the left

or the right of the appliance.

– The on-site connector for the drain

se can be adapted to different widths of hose. If the connector pro‐ trudes too far into the drain hose, it will need to be shortened. Otherwise the drain hose may become blocked.

– The drain hose must not be short‐

ened.

ull the lower spray arm firmly up‐

 P

wards to remove it.

 Cut off the t

wash cabinet.

op of the vent valve in the

Sound emission testing

Prerequisites for sound emission tests

Load the dishwasher with 16 sta gram.

Setup for sound emission tests

The dishwasher must be set up according to the following specifications.

ndard place settings and use the

Normal pr

o‐

 Install the dishwashe  Secur

e the front panel.

r into an analyzing unit.

Sound emission testing

 Push the provided fleece strips (depending on model) under the toe-kick until it

is flush with the appliance feet .

 P

ush the toe-kick into place in such a way that it is flush with the door front .

Sound emission testing

 Remo

 P

ve the protective film from the provided insulating strip (depending on

model) .

ush the insulating strip into the front top edge of the toe-kick .

9 Independence Way Princeton, NJ 08540 Phone: Fax: www.mieleusa.com

U.S.A.

Miele, Inc.

National Headquarters

Please have the model and serial number of your appliance available before contacting Technical Service.

Canada

Importer Miele Limited

Headquarters and Miele Centre

800-843-7231 609-419-4298

Technical Service & Support Nationwide

Phone: Fax: TechnicalService@mieleusa.com

161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca

800-999-1360 888-586-8056

Customer Care Centre

Phone:

customercare@miele.ca

800-565-6435 905-532-2272

Germany Manufacturer

Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh

G 6980 / G 6985



M.-Nr. 10 014 210 / 05en-US

Miele G 6980, G 6985 Operating instructions

Specifications and Main Features

Frequently Asked Questions

User Manual

IMPORTANT SAFETY INSTRUCTIONS

Correct use

Safety with children

Technical safety

Proper installation

Proper use

Accessories

Disposal of your old dishwasher

SAVE THESE INSTRUCTIONS AND PASS THEM ON TO ANY FUTURE USER

Guide to the dishwasher

Appliance overview

Control panel

Display functions

General information

Caring for the environment

Disposal of packaging material

Disposal of your old appliance

Energy-saving dishwashing

Before using for the first time

Opening the door

Emergency door opener

Closing the door

Basic settings

Language

Time of day

Water hardness

Dishwasher salt

Filling the salt reservoir

Salt refill indicator

Rinse aid

Adding rinse aid

Rinse aid indicator

Loading the dishwasher

Tips

Glass care

Loading examples

Loading for 10 standard place settings with cutlery tray

Loading for 16 standard place settings with cutlery tray

Loading for 10 standard place settings with cutlery basket

Loading for 13 standard place settings with cutlery basket

Upper basket

Adjustable cup rack (depending on model)

Hinged spikes

XXL cup rack (depending on model)

Glassware rack

Adjusting the height

Adjusting the upper basket

Dishwashers with cutlery basket

Dishwashers with cutlery tray

To raise the upper basket:

To lower the upper basket:

Lower basket

Removable MultiComfort insert

Removing the insert

Refitting the insert

Glass rack

Glassware rack

Hinged spikes

Bottle holder

Grates and filters

Grates

Filters

Cutlery

3D cutlery tray (depending on model)

Operation

Detergent

Detergent dosage

Adding detergent

Dispensing aid

Turning on

Selecting a program

Starting a program

Time display

TimeControl

Energy management

At the end of the program