This dishwasher complies with all current local and national safety
requirements. Inappropriate use can, however, lead to personal injury and material damage.
Please observe the installation sheet and read the operating instructions carefully before setting up the dishwasher and using it
for the first time. They both contain important information on the
installation, safety, use, and maintenance of the machine. This prevents both personal injury and damage to the dishwasher.
Miele expressly and strongly advises that you read and follow the
instructions in the section on installing the dishwasher as well as
the IMPORTANT SAFETY INSTRUCTIONS.
Miele cannot be held liable for injury or damage caused by noncompliance with these instructions.
Keep the installation sheet and the operating instructions in a safe
place and pass them on to any future owner.
6
IMPORTANT SAFETY INSTRUCTIONS
Appropriate use
This dishwasher is intended for use in domestic households and
similar residential environments.
This dishwasher is not suitable for outdoor use.
This dishwasher is intended for use at altitudes of up to 1,300ft
(4,000m) above sea level.
This dishwasher must only be used for cleaning domestic dishes
and cutlery. All other types of use are not permitted.
This appliance is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge.
7
IMPORTANT SAFETY INSTRUCTIONS
Safety with children
Children must be kept away from the dishwasher unless they are
constantly supervised.
Children may only use the dishwasher without supervision if they
have been shown how to use it in a safe manner. Children must be
able to understand and recognize the possible dangers caused by
incorrect operation.
Children must not be allowed to clean or maintain the appliance.
Children should be supervised in the vicinity of the dishwasher.
Never allow children to play with the dishwasher. There is a danger
that children might shut themselves in the dishwasher.
If the automatic door opening mechanism is active (depending on
the model), keep young children away from the area in which the
door opens.
Danger of suffocation. While playing, children may become entan-
gled in packaging material (such as plastic wrapping) or pull it over
their head with the risk of suffocation. Keep packaging material away
from children.
Keep children away from detergents. Detergents cause severe
skin burns and severe eye damage. They can cause burning in the
mouth and throat, or inhibit breathing. It is therefore important to
keep children away from the dishwasher when the door is open. Detergent residues could still be present in the machine. Seek medical
advice immediately if a child has swallowed or inhaled any detergents.
8
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Unauthorized installation, maintenance, and repairs can cause
considerable danger for the user. Installation, maintenance, and repairs should only be carried out by a Miele authorized technician.
Damage to the dishwasher can compromise your safety. Before
using the dishwasher and in particular following transport, check it
for any visible damage. Never use a damaged dishwasher.
The electrical safety of the dishwasher can only be guaranteed
when correctly grounded. It is most important that this basic safety
requirement is fulfilled. If in doubt, the electrical installation should
be checked by a qualified service technician.
Miele cannot be held liable for the consequences of an inadequate
or lack of grounding system (e.g., electric shock).
Reliable and safe operation of this dishwasher can only be as-
sured if it has been connected to the power supply.
Where the dishwasher is plugged into the electricity supply using
a 3-pin plug with a grounding contact, the electrical socket must be
easily accessible after the dishwasher is installed so that it can be
disconnected from the electricity supply at any time.
There must be no electrical sockets behind the dishwasher be-
cause the building-in niche may be too small. Danger of overheating
and fire risk if the dishwasher were to be pushed up against a plug.
The dishwasher must not be installed underneath a cooktop. The
high temperatures radiated by cooktops could damage the dishwasher below. For the same reason, the dishwasher must not be installed next to open fires or other appliances that give off heat, such
as heaters etc., not normally found in a kitchen.
9
IMPORTANT SAFETY INSTRUCTIONS
Ensure that the connection data on the dishwasher’s data plate
(fuse rating, frequency, and voltage) match the electricity supply.
This data must correspond in order to avoid the risk of damage to
the dishwasher. Compare these before connecting the appliance to
the electricity supply. If in any doubt, consult a qualified service
technician.
Do not connect the dishwasher to the electricity supply until it has
been fully installed and any adjustment has been made to the door
springs.
The dishwasher may only be operated if the door opening mecha-
nism is working correctly. Otherwise there could be a risk of danger
while the automatic door opening mechanism (depending on the
model) is active.
To check that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.
- The door locking pins automatically retract when the door opens
at the end of the drying phase.
Power bars and extension cords do not guarantee the required
safety of the appliance (risk of fire). Do not connect the dishwasher
to the electricity supply using a power bar or an extension cord.
The dishwasher must not be used in a non-stationary location
(e.g., on a ship).
Do not install the dishwasher in a room where there is a risk of
frost. Frozen hoses are at risk of tearing or bursting. The reliability of
the electronic control unit may be impaired at temperatures below
freezing point.
To avoid any damage to the appliance, the dishwasher must only
be operated when it is connected to a fully vented plumbing system.
10
IMPORTANT SAFETY INSTRUCTIONS
The plastic housing of the water connection contains an electrical
valve. The housing must not be dipped in water.
There are live wires in the water-intake hose. Do not shorten the
hose, even if it is too long.
The built-in Waterproof system offers reliable protection against
water damage if the following conditions are met:
- Installation has been carried out correctly.
- The dishwasher is properly maintained and parts are replaced in
case of noticeable damage.
- The water-supply faucet is turned off during longer absences from
the home (e.g., while on vacation).
The Waterproof system will work even when the dishwasher is
turned off. However, the dishwasher must remain connected to the
electricity supply.
The water-connection pressure needs to be between 7.25 and
145 psi (50 and 1,000kPa).
A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, turn it off at the electricity supply immediately and
contact your Miele dealer or Miele Customer Service.
The manufacturer’s warranty may be invalidated if the appliance is
not repaired to Miele authorized service standards.
We recommend replacing defective components with original
parts. If original Miele parts are installed correctly, Miele ensures full
compliance with safety requirements and the warranty remains valid.
During installation, maintenance, and repair work, the dishwasher
must be disconnected from the electricity supply (turn it off and withdraw the plug from the socket).
11
IMPORTANT SAFETY INSTRUCTIONS
If the power cord is damaged, it must only be replaced with a spe-
cific cord of the same type (available from Miele Customer Service).
For safety reasons, this must only be done by Miele Customer Service or a service technician authorized by Miele.
Correct installation
The dishwasher must be installed and connected in compliance
with the supplied installation sheet.
Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury/being cut. Wear protective gloves.
The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous countertop which is secured to adjacent cabinetry.
The dishwasher must only be built into a tall cabinet if additional
safety precautions are taken. In order to safely install the appliance
in a tall cabinet, please use the tall cabinet installation kit and observe the installation sheet provided. Otherwise there is the danger
of the cabinet tipping over.
The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the door
cannot fall open.
The appliance must only be operated with properly adjusted door
springs.
If the door cannot be adjusted properly, contact the Miele Customer
Service.
The maximum weight of the front panel that can be aligned with the
factory-installed door springs is 22-26.5 lb (10–12kg) depending on
model.
12
IMPORTANT SAFETY INSTRUCTIONS
Correct use
Do not use solvents in the dishwasher. There is a danger of explo-
sion.
Dishwasher detergents can cause burning on the skin and in the
eyes, nose, mouth, and throat. Avoid contact with detergents. Do not
inhale powder detergents. Do not swallow dishwasher detergents.
Seek medical attention immediately if detergent has been swallowed
or inhaled.
Avoid leaving the dishwasher door open unnecessarily. You could
injure yourself on the opened door or trip over it.
Do not sit, stand, or lean on the opened door. The dishwasher
could tip over. This could injure you or damage the dishwasher.
Dishes may be very hot at the end of the program. Allow the
dishes to cool until they are comfortable enough to handle before
unloading them.
Only use detergent and rinse aid formulated for domestic dish-
washers. Do not use liquid dish soap.
Do not use any commercial or industrial detergents. These may
cause material damage, and there is a risk of a severe explosive
chemical reaction (such as an explosive oxyhydrogen gas reaction).
Do not fill the rinse aid reservoir with powder or liquid detergent.
This will cause damage to the rinse aid reservoir.
Do not fill the AutoDos (depending on model) with powder or liq-
uid detergent. Loose detergent will damage the AutoDos.
Do not fill the salt reservoir with powder or liquid detergent. Dish-
washer detergent will damage the softener assembly.
Use only special, coarse-grained reactivation salt. Other types of
salt may contain insoluble components which can cause the water
softener to malfunction.
13
IMPORTANT SAFETY INSTRUCTIONS
In dishwashers with a cutlery basket (depending on model), knives
and forks should be placed with the handles upwards in the basket
for safety reasons. Knives and forks placed with the handles downwards pose a danger of injury. However, cutlery placed handle down
in the cutlery basket will come out cleaner and drier.
Plastic items which cannot withstand being washed in hot water,
such as disposable plastic containers or plastic cutlery, should not
be cleaned in the dishwasher. The high temperatures in the dishwasher may cause them to melt or lose shape.
If you use the timer option (depending on model), the detergent
compartment must be dry. Wipe dry with a cloth first if necessary.
The detergent will clump together if the detergent compartment is
not dry, and this may mean that it is not fully rinsed out.
Accessories and parts
Only use original Miele accessories. If other parts are used, war-
ranty, performance, and, if applicable, product liability claims will be
invalidated.
Miele will guarantee to supply functional spare parts for a mini-
mum of 10years and up to 15years following the discontinuation of
your dishwasher.
Transport
Damage to the dishwasher can compromise your safety. Before
using the dishwasher, check it for any visible transport damage.
Never use a damaged dishwasher.
Only transport the dishwasher in an upright position so that no
water flows into the electrical controls, as this would cause faults.
If you wish to transport the dishwasher, empty it and securely fas-
ten all loose parts such as baskets, hoses, and power cords.
14
IMPORTANT SAFETY INSTRUCTIONS
Disposal of your old dishwasher
Remove the door of the dishwasher so that children cannot be-
come trapped inside.
FCC Declaration of Conformity
These devices comply with FCC Rules Part15. This equipment
has been tested and found to be in compliance with the limits for a
ClassB digital device, pursuant to Part15 of the FCC Rules of Operation and is subject to the following conditions:
These devices may not cause harmful interference.
These devices must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 8" (20cm) between the
radiator and your body.
Industry Canada Statement
This digital apparatus does not exceed the ClassB limits for Ra-
dio Noise Emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Complies with Canadian ICES-003 ClassB specifications.
15
Notes on the operating instructions
Notes on the layout
Warnings
Warnings important for safety
are highlighted like this. This alerts
you to the potential danger of injury
to people or damage to property.
Read the warnings carefully and follow the instructions and directions.
Notes
Notes contain information that is particularly important to follow.
They are highlighted in a thick
framed box.
Additional information and comments
Additional information and comments
are contained in a narrow frame.
Instructions for the user
Instructions on how to operate the dishwasher are identified by marked operating steps. They explain the procedure
step by step.
Operating steps are indicated by a
black square bullet point.
Example:
Select the setting you want and press
OK to confirm.
Display
Information that is shown in the dishwasher display appears in a special font
similar to the display text.
Example:
When the message Close the door appears in the display...
16
The following items are supplied:
- dishwasher
- operating instructions for operating
the dishwasher
- installation sheet for installing the
dishwasher
- other installation accessories for installing the dishwasher (see installation sheet)
- funnel for filling the reactivation salt (if
available)
- additional printed matter and addons if required
Scope of delivery
17
Guide to the appliance
Appliance overview
a
Top spray arm
b
Cutlery tray (depending on model)
c
Upper basket (depending on model)
d
Middle spray arm
e
Aeration valve
f
Bottom spray arm
18
g
Filter combination
h
Salt reservoir
i
Data plate
j
Rinse aid reservoir
k
Detergent compartment
Control panel
Guide to the appliance
a
In-operation indicator light
For indicating an ongoing wash program when the door is closed.
b
Program selection
Normal = Normal
Pots= Pots & Pans
Crystal = China & Crystal
Quick= QuickIntenseWash
Sani= SaniWash
More= Additional programs/set-
tings
c
Timer button
For selecting a later program start.
d
OKbutton
To select menu options and values
displayed.
To confirm messages.
e
buttons
For program selection.
For changing the values displayed.
For scrolling to other menu pages.
f
Display
For further information, see “Display
functions” under “Guide to the appliance”.
g
Backbutton
For navigating back to the previous
menu or deleting values which have
been set previously.
h
Program options button
Express: for reducing the program
cycle time.
IntenseZone: for increasing the
cleaning performance in the lower
basket.
i
Program program selection button
For program selection.
j
On/Off button
For turning the dishwasher on and
off.
19
Guide to the appliance
Display functions
The display is used to select or set the
following:
- the program
- the Timer
- the Settings
The display can show the following:
- the program stage
- The estimated time left for the program to run
- Any relevant fault messages and information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the button to switch the dishwasher back on.
The OKbutton is used to confirm a
message or setting and also to move to
the next menu or another level.
Under More, a scroll bar will ap-
pear in the right of the display. This offers further options. These options can
be shown using the buttons.
You can alter the dishwasher’s controls
to suit changing requirements in the
“Settings” menu (see “Settings”).
The option which is selected will have a
check next to it.
To exit a sub-menu again, press the
Back button.
If you do not press any buttons for several seconds, the display will revert to
the previous menu. You will then have
to enter your settings again.
20
Caring for the environment
Disposal of the packing material
The cardboard box and packing materials protect the appliance during shipping. They have been designed to be
biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children. Danger of suffocation!
Disposal of your old appliance
Electrical and electronic appliances
contain valuable materials. They also
contain certain substances, compounds
and components which were essential
for the proper functioning and safe use
of the equipment. Handling these materials improperly by disposing of them in
your household waste can be harmful to
your health and the environment. Therefore, please do not dispose of your old
appliance with regular household waste
and follow local regulations on proper
disposal.
Consult with local authorities, dealers or
Miele in order to dispose of and recycle
electrical and electronic appliances.
Miele assumes no responsibility for
deleting any personal data left on the
appliance being disposed. Please ensure that your old appliance is kept
away from children until removal. Observe safety requirements for appliances that may tip over or pose an entrapment hazard.
21
Before using for the first time
Every dishwasher is tested at the factory. There will be residual water in the
machine from this test. It is not an indication that the dishwasher has been
used previously.
Opening the door
In some programs the door automatically opens slightly to assist the drying
process.
This function can be deactivated, if preferred (see “AutoOpen” under “Settings”).
Pull the handle to open the door.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Risk of injury due to door open-
ing automatically.
The door may open automatically at
the end of a program.
Keep the area around the door free
of obstructions.
Closing the door
Insert the baskets.
Raise the door upwards until the
catch engages.
Risk of crushing due to the door
closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.
Open the door fully to disengage the
locking mechanism.
At the end of the program, if the AutoOpen function is on, the door locking
pins automatically retract.
To prevent a technical fault, do not
hold the door locking pins firmly
when they are retracting.
If the door is opened during operation,
all functions are automatically interrupted.
22
Before using for the first time
Miele@home
Your dishwasher is equipped with an
integrated WiFi module.
To use this feature, you will need:
- A WiFi network
- The Miele app
- A Miele user account. The user account can be created via the Miele
app
The Miele app will guide you as you
connect your dishwasher to your home
WiFi network.
Once your dishwasher is connected to
your WiFi network, you can use the
app, for example, to carry out the following activities:
- Control your dishwasher remotely
- Call up information on the operating
status of your dishwasher
- Call up information on the program
sequence of your dishwasher
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can cause sporadic or even
complete connection failures. Therefore, the availability of featured functions cannot be guaranteed.
Miele@home availability
The ability to use the Miele app depends on the availability of the
Miele@home service in your country.
The Miele@home service is not available in every country.
For information about availability,
please visit www.miele.com.
Miele App
The Miele App is available to download
free of charge from the Apple App
Store® or from the Google Play Store™.
Connecting your dishwasher to your
WiFi network will increase energy consumption, even when the dishwasher is
turned off.
Make sure that your WiFi network
signal strength is strong enough at
the installation site of your dishwasher.
23
Before using for the first time
Basic settings
Turning on the dishwasher
Open the door.
Turn the dishwasher on with the
button.
The welcome screen will appear when
the dishwasher is turned on.
For further information about the display functionality, see “Display functions” under “Guide to the appliance”.
Setting the language
The display will change automatically to
the screen for setting the language.
Select the language you want as well
as the country, if applicable, using
the buttons and confirm with OK.
For further information on setting the
language, see “Language” under “Settings”.
Setting up Miele@home
The message Set up Miele@home will appear on the display.
To set up Miele@home now, confirm
by touching OK.
Tip: To postpone setup until later, select
the optionSkip and confirm with OK.
There are 2 ways of connecting your
dishwasher to your WiFi network:
Select the connection method you
want and confirm your choice with
OK.
1. Connect using App
2. Connect using WPS
You will then be guided by the display
and the Miele app.
For further information on
Miele@home, see “Miele@home” under “Settings”.
A check will appear next to the language that has been set.
24
Before using for the first time
Setting the water hardness
The display changes to the screen for
setting the water hardness.
- The dishwasher must be programmed to the correct water hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10-16 gpg (10–15°dH),
always program the dishwasher to
the higher value (16 gpg (15°dH) in
this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________gpg (°dH)
The dishwasher is programmed at the
factory for a water hardness level 1 gpg
(1°dH).
Finally, prompts will appear in the display.
After confirming these prompts with
OK, the messages Refill salt and
Refill rinse aid may appear.
Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Before using for the first
time”).
Select OK to confirm the messages.
The program selected will appear in the
display briefly and the indicator light for
the program selected will come on.
The display will then show the estimated program duration for the program selected.
Set the water hardness level in your
area and confirm with OK.
See “Water hardness” under “Settings” for more information.
25
Before using for the first time
Reactivation salt
In order to achieve good cleaning results, the dishwasher needs to operate
with soft water. Hard water results in
the build-up of calcium deposits on
dishes and on the inner surfaces of the
machine.
Domestic water with a hardness level
higher than 5 gpg (5°dH – German
scale) must be softened. This occurs
automatically in the integrated water
softener. The water softener is suitable
for a water hardness level of up to 73
gpg (70°dH – German scale).
In order to be reactivated, the water
softener requires reactivation salt.
Depending on the water hardness level
(<22 gpg, or <21°dH – German scale),
reactivation salt may not be required if
combination detergents are being used
(see “Active ingredients” under “Detergents”).
If the water in your area is very soft
and constantly lower than 5 gpg(5°dH – German scale), you do not
need to add reactivation salt. The salt
refill indicator will automatically turn
off after the water hardness has been
set accordingly (see “Water hardness”
under “Settings”).
Damage to the water softener
from detergent.
Dishwasher detergent will damage
the softener assembly.
Do not fill the salt reservoir with pow-
der or liquid detergent.
Damage caused by using unsuit-
able salts.
Some types of salt may contain in-
soluble components which can
cause the water softener to malfunction.
Use only special, coarse-grained reactivation salt.
26
If you only ever use combination detergent products in your dishwasher,
you can turn off both refill reminders if
you wish (see “Refill reminders” under
“Settings”).
Please make sure that if you stop using combination detergents, you refill
the reactivation salt and rinse aid.
Turn the refill reminders back on if required.
Filling the salt reservoir
Before filling the salt reservoir for the
first time, you must fill it with approx.
1l of water to enable the salt to dissolve.
Once the dishwasher has been used
for the first time, there is always sufficient water in the reservoir.
Remove the lower basket from the
wash cabinet and unscrew the salt
reservoir cap.
Before using for the first time
Risk of corrosion due to saline
solution.
Water or saline solution will run out
of the reservoir when the cap is
opened. Salt solution that runs out
can cause corrosion in the wash
cabinet and to the wash items.
The cap should therefore only be removed in order to refill the salt reservoir.
Fill the salt reservoir with approx. 1l
of water (first use only).
Place the funnel provided over the
salt reservoir and carefully fill with reactivation salt until the reservoir is
full. The salt reservoir holds up to 2.2
lb (1kg) of salt, depending on the
type of salt used.
Clean off salt residues from around
the salt reservoir opening. Next,
screw the salt reservoir cap on again
firmly.
Immediately after filling the salt reser-
voir and each time you remove the
salt reservoir cap, run the 150°F
(65°C)QuickIntenseWash program
with the Express program option
selected without wash items in the
dishwasher to dissolve and remove
any traces of salt from the wash cabinet.
27
Before using for the first time
Refilling the salt
Fill the salt reservoir with reactivation
salt when Refill salt appears in the
display.
Confirm with OK.
The salt refill indicator will go out.
Danger of corrosion due to saline
solution.
Salt solution that runs out can cause
corrosion in the wash cabinet and to
the wash items.
Each time you remove the salt reservoir cap, you must run the
QuickIntenseWash program with
the Express program option selected without wash items in the
dishwasher. This will dissolve and remove any traces of salt from the
wash cabinet.
After the salt reservoir has been filled,
the refill indicator may still appear in the
display if the salt concentration has not
yet reached the correct level. In this
case, still confirm the message with OK.
The salt refill indicator will be turned off
if you have programmed the dishwasher
for a water hardness below 5 gpg
(5°dH – German scale).
28
Before using for the first time
Rinse aid
Rinse aid is necessary to ensure that
water does not cling and leave marks
on dishes during the drying phase, and
helps dishes dry faster after they have
been washed.
Rinse aid is poured into the container
and the amount set is dispensed automatically.
Liquid dish soap or detergent
can cause damage.
Liquid dish soap and detergent can
damage the rinse aid reservoir.
Only fill it with rinse aid formulated
for domestic dishwashers.
Risk of acid damage.
The dishwasher can be damaged by
high concentrations of acid.
Under no circumstances should you
use citric acid with a higher acid
content.
If you only ever wish to use combination detergent products in your dishwasher, you do not need to add rinse
aid.
However, for optimum rinsing and
drying results, use dishwasher detergent and add reactivation salt and
rinse aid separately.
If you only ever use combination detergent products containing salt and
rinse aid in your dishwasher, you can
turn off both refill reminders if you
wish (see “Refill reminders” under
“Settings”).
Please make sure that if you stop using combination detergents, you refill
the reactivation salt and rinse aid.
Turn the refill reminders back on if required.
29
Before using for the first time
Adding rinse aid
Press the yellow button on the lid
of the rinse aid reservoir.
The lid will spring open.
Close the lid firmly until you hear it
click into place. Otherwise, water can
enter the rinse aid reservoir during a
program.
Wipe up any spilled rinse aid. This
prevents excess foam developing
during the next program.
You can adjust the rinse aid dosage
for best wash results (see “Rinse aid”
under “Settings”).
Filling the rinse-aid reservoir
When Refill rinse aid appears in the
display, the reservoir contains sufficient
rinse aid for 2–3 programs only.
Add rinse aid in plenty of time.
Confirm with OK.
The rinse-aid refill indicator will go out.
Fill with rinse aid until the filling level
indicator (arrow) changes to a dark
color while the door is horizontally
open.
The rinse aid reservoir holds approximately 110ml.
30
Loading...
+ 74 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.