Miele ESW 4702 Specification

Product and Cut-out Dimensions Page 1 of 3

ESW 4702 FB Custom Panel and Handle

Warming Drawer

Installation shown with a Miele
70 cm Oven

O

Location Codes

E – The drawer comes equipped with a 5 ft. (1.5 m) power
cord with a three-prong grounding plug ready for connection
to a 120V, 15 A, 60 Hz power supply.

O – 1” ² minimum hole size for plug. Outlet to be

installed in adjacent cabinetry

Notes

Panel must consist of heat resistant material 140 ° F (60° C).
Miele appliances can be installed flush or proud. Discuss
your installation requirements with your architect, designer
and installer.
All installations must be done in accordance with local codes.

E

Note: Drawing is not to scale
Specification Sheets OJS 11142011

Product and Cut-out Dimensions Page 1 of 4
Warming Drawer
ESW 4702 FB Custom Panel and Handle

Side view with a Miele oven

This unit is designed to accept a custom door panel supplied by the cabinet maker.
Panel size as follows:

Width: 27 3/8” (695 mm)
Height: 10 5/8” (270 mm)
Thickness: Minimum of 3/8” (10 mm)
Maximum panel weight: 1 1 Pounds (5 kg)

Location Codes

E – The drawer comes equipped with a 5 ft. (1.5 m) power
cord with a three-prong grounding plug ready for connection
to a 120V, 15 A, 60 Hz power supply.

O – 1” ² minimum hole size for plug. Outlet to be

installed in adjacent cabinetry

Notes

Panel must consist of heat resistant material 140 ° F (60° C).
Miele appliances can be installed flush or proud. Discuss
your installation requirements with your architect, designer
and installer.
All installations must be done in accordance with local codes.

Note: Drawing is not to scale
Specification Sheets OJS 11142011