Loading...
en Operating Instructions Vacuum cleaner
fr Instructions d'utilisation Aspirateur
USA, CA
HS08
M.-Nr. 10 154 111
en ....................................................................................................................... |
5 |
fr ......................................................................................................................... |
30 |
2
Only Miele FilterBags, filters and accessories with the "Original Miele" logo can be used with this vacuum. Only then can the suction power of the vacuum cleaner reach its optimum potential creating the best possible cleaning results.
USE OF NON-MIELE COMPONENTS MAY VOID THE WARRANTY.
The use of FilterBags made of paper or a similar material, or FilterBags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and may void the warranty, just as with the use of FilterBags without the "Original Miele" logo.
The "Original Miele" Logo will appear on the packaging or directly on the FilterBag.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele store at www.mieleusa.com.
3
en - Contents |
|
IMPORTANT SAFETY INSTRUCTIONS ................................................................ |
5 |
Appliance description ......................................................................................... |
10 |
Caring for the environment ................................................................................ |
13 |
References to illustrations.................................................................................. |
14 |
Preparing for use................................................................................................. |
14 |
Use........................................................................................................................ |
14 |
Using the Powerbrush......................................................................................... |
17 |
Maintenance ........................................................................................................ |
17 |
Purchasing new FilterBags and filters ................................................................... |
18 |
Ordering the correct FilterBags and filters ............................................................ |
18 |
When to change the FilterBag (Fig. 23) ................................................................. |
18 |
Checking the FilterBag change indicator .............................................................. |
18 |
How the FilterBag change indicator works ........................................................... |
19 |
Replacing the FilterBag ........................................................................................ |
19 |
When to change the dust compartment filter........................................................ |
19 |
Changing the dust compartment filter ................................................................. |
19 |
When to replace the exhaust filter ........................................................................ |
20 |
Replacing the AirClean exhaust filter ................................................................... |
20 |
Replacing the Active AirClean 30 and HEPA AirClean 30 exhaust filters.............. |
20 |
Replacing one type of exhaust filter with another (Fig. 02) ................................... |
21 |
When changing the filter type, please note:.......................................................... |
21 |
Service indicator with Reset button ..................................................................... |
21 |
Removing threads and hair from the Powerbrush................................................. |
21 |
Cleaning and care ............................................................................................... |
22 |
Frequently asked questions ............................................................................... |
23 |
After sales service............................................................................................... |
24 |
Warranty conditions ............................................................................................ |
24 |
Optional accessories .......................................................................................... |
24 |
Limited Warranty - Vacuum Cleaners................................................................ |
26 |
4
en - IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
This vacuum cleaner complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the vacuum cleaner, please read these instructions carefully before using it for the first time. They contain important information on its safety, operation and maintenance.
Keep these operating instructions in a safe place and pass them on to any future user.
Always disconnect the vacuum cleaner from the power supply when you have finished using it, before changing over accessories, as well as for maintenance work and cleaning. Turn the vacuum cleaner off and unplug it.
Correct use
This vacuum cleaner is intended for cleaning flooring in domestic households and similar residential environments.
This vacuum cleaner can be used for all normal cleaning of carpets and rugs.
This vacuum cleaner is not intended for outdoor use.
The vacuum cleaner must only be used to vacuum dry floor surfaces. Do not use on people and animals. Any other usage, modification or alteration is not supported by the manufacturer and could be dangerous.
5
en - IMPORTANT SAFETY INSTRUCTIONS
Persons which lack physical, sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person.
Safety with children
Children must be kept away from the vacuum cleaner unless they are constantly supervised.
Please supervise children in the vicinity of the vacuum cleaner and do not let them play with it.
WARNING
To reduce the risk of fire, electric shock or injury:
Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. Use only household AC outlets. Never use DC power sources. If you are not sure of your home’s voltage supply, consult a qualified electrician. Connecting the vacuum cleaner to a higher voltage than indicated in these instructions may result in damage to the vacuum cleaner or injury.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not alter the plug in any way.
6
en - IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Before using the vacuum cleaner and its accessories, check for any visible signs of damage. Do not use a damaged appliance.
Ensure that the connection data on the data plate of the vacuum cleaner (voltage and frequency) match the mains electricity supply exactly. Without modifications, the vacuum cleaner is suited for 50Hz or 60Hz.
The electrical outlet must be fitted with a 15 A fuse.
Reliable and safe operation of this vacuum cleaner can only be assured if it has been connected to the electricity supply.
While the vacuum cleaner is under warranty, repairs should only be performed by a Miele-authorized service technician. Otherwise the warranty will be void.
Do not pull or carry the vacuum cleaner by the power cord, and be careful not to damage the cord when withdrawing the plug from the socket. Keep the cord away from sharp edges and do not let it get pinched, for example, under a door. Avoid running the vacuum cleaner over the cord. This could damage the cord, plug or socket. The appliance must not be used if any of these have suffered damage.
Do not use the vacuum cleaner if the power cord is damaged. If the cord is damaged it must be replaced with an original Miele cord. For safety reasons, this work must only be performed by the Miele Service Department or a Miele-authorized service technician.
7
en - IMPORTANT SAFETY INSTRUCTIONS
Do not let the vacuum cleaner get wet. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply.
Repairs should only be carried out by a Miele-authorized service technician. Repairs and other work by unqualified persons can cause considerable danger to users.
Proper use
Never touch the roller brush while it is rotating.
Accessories and wands must not be used at head level.
To avoid the risk of injury, do not vacuum with the suction hose handle or the telescopic wand at head level.
To avoid the risk of damage, do not use the vacuum cleaner without the FilterBag, dust compartment filter and exhaust filter in place.
The dust compartment cover will not close without a FilterBag inserted. Do not force it.
Do not use the vacuum cleaner to vacuum up any water, liquid or damp dirt. Wait until any freshly cleaned or shampooed rugs or carpets are completely dry before attempting to vacuum.
Do not use the vacuum cleaner to vacuum toner dust. Toner, such as that used in printers and photocopiers, can conduct electricity.
Do not vacuum up any inflammable or combustible liquids or gases and do not vacuum in areas where such substances are stored.
8
en - IMPORTANT SAFETY INSTRUCTIONS
Do not vacuum up anything which has been burning or is still glowing, e.g., cigarettes, ashes or hot ash, whether glowing or apparently extinguished.
Accessories
It is not advisable to vacuum directly with the handle, i.e., without an accessory attached, as the rim could get damaged and you could hurt yourself on sharp edges.
Only use genuine FilterBags, filters and accessories with the "Original Miele" logo on them. Otherwise the manufacturer cannot guarantee the safety of the product.
SAVE THESE INSTRUCTIONS
9
en - Appliance description
This illustration shows the vacuum cleaner with all available features.
ONLY MIELE FILTERBAGS, FILTERS AND ACCESSORIES WITH THE "ORIGINAL MIELE" LOGO CAN BE USED WITH THIS VACUUM CLEANER. USE OF NONMIELE COMPONENTS MAY VOID THE WARRANTY.
10
en - Appliance description
Features marked * are model-specific and may vary or not be available on your vacuum cleaner.
a Upper hook for power cord b Suction hose holder
c Suction hose with handle d Release button
e Telescopic wand
f Dust compartment filter
g Telescopic wand release button h Vacuum cleaner foot release i Exhaust filter *
j Exhaust filter compartment
kPowerbrush
lLight *
mFilterBag change indicator
nDust compartment release button
oFilterBag
pControl panel (see following page for description) *
qPower cord
rPowerbrush On/Off button ( / O)
sOn/Off button (l / O)
tHandpiece
Back:
u Lower swivel hook for power cord v Upholstery nozzle
w Carrying handle x Crevice nozzle
y Dusting brush with natural bristles z Telescopic wand holder
11
en - Appliance description
Depending on the model, your vacuum will come standard with one of the following control panels:
Vacuum cleaner in-operation indicator
Powerbrush in-operation indicator light
Suction power selector (rotary dial)
Automatic button
Suction power selector (+ / - buttons)
Overheat indicator
Powerbrush indicator light
Service indicator (Reset button)
Powerbrush in-operation indicator
12
en - Caring for the environment
Disposal of packing material
The packaging is designed to protect against transportation damage. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.
Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.Make sure the packaging is disposed of in the proper manner for your area.
Disposing of the FilterBags
and filters
Filterbags and filters are made from environmentally friendly materials, and can be disposed of with the normal household waste, as long as they have been used exclusively for general household dust.
Disposal of your old appliance
Before disposing of your old appliance remove the FilterBag and filters and dispose of them with your household waste.
Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. You can obtain information on this matter from your dealer, if necessary.
Please be sure that your old appliance does not pose a danger to children while being stored for disposal.
13
en-US
References to illustrations
The illustrations referred to in the text are shown on the fold-out pages at the end of these Operating Instructions.
Preparing for use
Assembly (Fig. 01)
Raise the vacuum cleaner into the vertical position.
Insert the handle into the vacuum cleaner until it clicks into position.
Activating the exhaust filter change indicator
Depending on the model, your vacuum cleaner will come standard with one of the following exhaust filters (Fig. 02):
a |
AirClean |
|
|
b |
Active AirClean |
30 |
(black) |
c |
HEPA AirClean |
30 |
(white) |
If your vacuum cleaner is equipped with filter type b or c, you will need to activate the exhaust filter change indicator.
Open the lid of the exhaust filter compartment and pull the exhaust filter slightly out of the holder (Fig. 03).
Remove the indicator strip, then reinsert the exhaust filter (Fig. 04).
Press the exhaust filter change indicator (Fig. 05).
After approx. 10 - 15 seconds, a thin red stripe will appear on the left-hand side of the display (Fig. 06).
Close the exhaust filter compartment lid.
Function of the exhaust filter change indicator
The exhaust filter change indicator shows the remaining functional life of the exhaust filter. After approx. 50 operating hours, or approx. one year of average use, the display will be completely filled with red (Fig. 07).
Use
Unwinding the power cord (Fig. 08)
The lower cord hook can be pivoted.
Turn it upwards so that the cord can be removed easily.
Winding up the power cord (Fig. 09)
When the vacuum cleaner is not in use, the power cord can be wound around the two cord hooks.
Secure the power cord by clipping the plug to the cord (see detailed image).
Plugging in the vacuum cleaner (Fig. 10)
When vacuuming, loop the power cord through the guide notch on the side of the upper cord hook.
This will keep the power cord from getting in the way during vacuuming. It also protects the cable from becoming kinked at the handle.
Releasing the vacuum cleaner (Fig. 11)
Press the foot release briefly and tilt the vacuum cleaner to a comfortable position for vacuuming.
14
en-US
Turning the vacuum on and off (Fig. 12)
Please be sure to observe your flooring manufacturer's cleaning and care instructions.
Press the I button on the handle.
The vacuum cleaner will turn on.
On models with a rotary selector dial: The vacuum cleaner in-operation indicator on the control panel will light up yellow.
On models with + / - buttons: The power settings on the control panel will light up yellow.
The light on the floorhead will come on to ensure adequate visibility of the vacuuming area.
Selecting the suction power
The suction power can be adjusted to suit the type of flooring being cleaned. Reducing the power lowers the amount of effort required to maneuver the floor brush.
Rotary dial (Fig. 13)
(depending on model)
Turn the power selector manually to the desired power setting.
+ / - buttons (Fig. 14)
(depending on model)
There are symbols on the control panel indicating what type of use the individual settings are suitable for.
Curtains, lightweight fabric
Upholstery, cushions
Deep pile carpets, rugs and runners
Energy-saving normal vacuuming. This setting is also very quiet.
Low pile carpet and rugs
Heavily soiled carpets and rugs
Press the + button to select a higher power level.
Press the - button to select a lower power level.
The selected setting will light up yellow.
Automatic power regulation (Fig. 15)
(on models with + / - buttons)
The power is automatically adjusted to suit the type of carpet being vacuumed.
Press the Automatic button.
The button will light up yellow.
To deactivate the Automatic setting, press the Automatic button again.
Do not use the Automatic setting to vacuum lightweight materials or curtains. These could be sucked in and possibly damaged.
Obstacles (Fig. 16)
Obstacles and variations in floor height, for instance when vacuuming over thresholds and the edges of rugs, are easy to maneuver.
15
en-US
Briefly press the foot release and lift the front of the vacuum cleaner over the obstacle.
Vacuuming using the suction hose
To avoid the risk of injury, do not vacuum with the suction hose handle at head level.
Do not vacuum directly with the handle, i.e., without an accessory attached, as the rim could get damaged and you could hurt yourself on sharp edges.
When vacuuming stairs, be sure to place the vacuum cleaner on a lower step to prevent the risk of injury.
Raise the vacuum cleaner into the vertical position.
Press the release button on the telescopic wand to detach the suction hose handle (Fig. 17).
For increased stability, turn the elbow joint at the bottom of the hose downwards as illustrated until it clicks into position above the retainer (Fig. 18).
During normal vacuuming, the suction hose handle should be securely connected to the telescopic wand.
Make sure the handle is also properly hooked into its holder on the vacuum cleaner (Fig. 17).
Vacuuming using the telescopic wand
To avoid the risk of injury, do not vacuum with the telescopic wand at head level.
When vacuuming stairs, be sure to place the vacuum cleaner on a lower step to prevent the risk of injury.
Raise the vacuum cleaner into the vertical position.
Lift the handle out of its holder to access the telescopic wand (Fig. 19).
For increased stability, turn the elbow joint at the bottom of the hose downwards as illustrated until it clicks into position above the retainer (Fig. 18).
One part of the telescopic wand is fitted inside the other so that the tube can be adjusted to suit your preferred height for comfortable vacuuming.
Press the release button and adjust the tube to the desired height (Fig. 20).
For normal vacuuming, the telescopic wands must be pushed back together and locked into position again.
Make sure the handle is also correctly hooked into its holder on the vacuum cleaner (Fig. 19).
16
en-US
Using the Powerbrush
Recommended use
Please be sure to observe your flooring manufacturer's cleaning and care instructions.
The Powerbrush is specially suited for the thorough vacuuming of carpets subject to heavy wear. It is very effective at removing deep-seated dirt and preventing frequently used areas from being trodden into a path.
Do not use the Powerbrush to vacuum high quality, hand knotted rugs, for example Berber or Persian rugs, as well as extremely long piled area rugs and carpets, e.g. shag.
There is a danger of the threads being pulled out. Turn the Powerbrush off to vacuum these types of floor coverings and use only low suction power.
Do not use the Powerbrush to clean highly variable or uneven floors. The sole plate may come into contact with the floor and cause damage.
Switching the Powerbrush on and off (Fig. 21)
To use the Powerbrush, you will need to switch it on in addition to the vacuum cleaner using the button on the handle.
The Powerbrush indicator light on the control panel will light up yellow.
This button also enables you to switch the Powerbrush off when vacuuming.
During vacuuming, the Powerbrush will switch off automatically whenever the vacuum cleaner is raised to its upright position.
How to use the Powerbrush
To achieve the best results, pass the Powerbrush slowly backwards and forwards over the carpet or floor.
For rugs with fringe, always draw the Powerbrush from the middle of the rug across the fringe towards the floor to keep the fringe smooth.
Using the accessories supplied
(Fig. 22)
The following accessories are stowed at the back of the vacuum cleaner:
Upholstery nozzle
Crevice nozzle, 12" (300 mm)
Dusting brush with natural bristles
Attach the desired accessory to the suction hose handle or the telescopic wand.
Maintenance
Always disconnect the vacuum cleaner from the electrical supply for maintenance work. Unplug it from the wall socket.
The Miele filtration system consists of three filters:
–FilterBag
–Dust compartment filter
–Exhaust filter
17
en-US
These will need to be replaced from time to time to ensure that your vacuum cleaner performs efficiently.
We recommend only using genuine FilterBags, filters and accessories with the "Original Miele" logo on them. This will ensure that the suction power of the vacuum cleaner is maintained, giving the best possible cleaning results.
FilterBags with the "Original Miele" logo on them are not made from paper or paper-based materials and nor do they have a cardboard collar. This is why our FilterBags are particularly long-lasting and reliable.
Please note that appliance faults and damage originating from the use of accessories which do not carry the "Original Miele" logo will not be covered by the appliance guarantee.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can be ordered from Miele, your Miele dealer or online at: www.Mieleusa.com
Ordering the correct FilterBags and filters
Only use original Miele U FilterBags with a green collar and original Miele filters. These can be identified by the "Original Miele" logo located on the packaging or directly on the FilterBag.
An AirClean filter and a dust compartment filter are supplied with every packet of Miele FilterBags.
These can also be purchased separately from your Miele Dealer, from Miele or from the online shop. Please specify the model number of your vacuum cleaner when ordering to ensure that your receive the correct filter.
When to change the FilterBag (Fig. 23)
Change the FilterBag when the color marker in the FilterBag change indicator turns red, or sooner if it is no longer effective (see possible reasons for this below).
Miele FilterBags are disposable and designed for single use only. Dispose of the FilterBag when full. Do not attempt to reuse. Blocked pores in used FilterBags will reduce the suction power of the vacuum cleaner.
Checking the FilterBag change indicator
Raise the vacuum cleaner into the vertical position.
Turn the vacuum cleaner on using the
I button on the handle and set the power selector to the highest power setting.
18
en-US
Tilt the vacuum cleaner until you can easily see the color marker in the FilterBag change indicator. The front of the Powerbrush will lift up as you do this.
If the marker completely fills the FilterBag change indicator, you should replace the bag with a new one.
How the FilterBag change indicator works
The FilterBag change indicator is set for normal household dust. This generally contains a mixture of dust, hair, threads, carpet lint, grit, etc.
However, if the cleaner has been used to vacuum up fine dust, such as plaster, brick dust, cement or flour, the pores of the FilterBag will become blocked very quickly.
This affects the air permeability of the bag, and the marker will indicate that the bag is "full" even when it is not. If this happens you must still change the FilterBag because suction power will be greatly reduced by blocked pores in the FilterBag.
If, on the other hand, a large amount of hair and carpet lint which typically contains a lot of air is vacuumed up, the indicator may fail to react even though the bag is full. You should still change it. Both these extremes can occur.
Replacing the FilterBag (Fig. 24, 25, + 26)
Raise the vacuum cleaner into the vertical position.
Lift the release button for the dust compartment lid and raise the lid until it clicks into its resting position.
Pull the tab on the collar and swing the bag up away from the suction socket before taking it out of its holder.
The FilterBag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping.
Insert the new FilterBag into the holder as far as it will go. Leave the bag folded up when you take it out of the box.
It should then be unfolded as far as possible in the dust compartment.
Close the dust compartment lid securely, making sure it clicks into position. Take care not to pinch the FilterBag in the lid when doing so. The FilterBag is then automatically guided into position for vacuuming.
An empty operation lock prevents the dust compartment lid from closing without a FilterBag in place. Do not attempt to force the lid shut!
When to change the dust compartment filter
Replace this filter every time you start a new packet of FilterBags. A dust compartment filter is supplied with every packet of Miele FilterBags.
Changing the dust compartment filter (Fig. 27)
Open the dust compartment lid.
Remove the FilterBag.
19
en-US
Lift up the filter frame until it clicks and remove the old filter. Hold the filter by the clean, unsoiled section to remove it.
Replace with a new dust compartment filter.
Close the filter frame.
Insert the FilterBag into the holder as far as it will go.
Close the dust compartment lid securely, making sure it clicks into position. Take care not to pinch the FilterBag when doing so.
When to replace the exhaust filter
Depending on the model, your vacuum cleaner will come standard with one of the following exhaust filters (Fig. 02):
a AirClean
Replace this filter every time you start a new packet of Miele FilterBags. An AirClean exhaust filter is supplied with every packet of Miele FilterBags.
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
Replace this filter when the exhaust filter change indicator is completely red (Fig. 07).
This occurs after approx. 50 hours of operation, which is equivalent to about a year of average use. The vacuum cleaner can still be used. However, the power will be reduced as will the effectiveness of the filter if it is not replaced in due time.
Replacing the AirClean exhaust filter (Fig. 28, 29, + 30)
Do not use more than one exhaust filter at a time.
Open the exhaust filter compartment lid.
Remove the filter frame.
Open the filter frame and remove the used AirClean filter by one of the clean, unsoiled sections.
Replace it with a new AirClean exhaust filter.
If you wish to install an Active AirClean 30 or HEPA AirClean 30 exhaust filter, see "Replacing one type of exhaust filter with another."
Secure the catch on the filter frame and reinsert the frame in the exhaust filter compartment.
Close the exhaust filter compartment lid.
Replacing the Active AirClean 30 and HEPA AirClean 30 exhaust filters
Do not use more than one exhaust filter at a time.
Open the exhaust filter compartment lid.
Remove the exhaust filter (Fig. 31).
Insert the new exhaust filter and press the exhaust filter change indicator (Fig. 05).
After approx. 10 - 15 seconds, a thin red stripe will appear on the left-hand side of the display (Fig. 06).
20
Loading...