XBOX 360 WIRELESS NETWORKING
ADAPTER STAND
SUPPORT D’ADAPTATEUR RÉSEAU
SANS FIL XBOX 360
SOPORTE DE ADAPTADOR DE RED
WIRELESS XBOX 360
ENGLISH
Xbox 360 Wireless Networking Adapter Stand
The Xbox 360™ Wireless Networking
Adapter Stand lets you move your
adapter to a location away from
radio interference for better
connectivity to your wireless
network. It is intended for use
exclusively with the Xbox 360 video
game and entertainment system.
Your adapter stand features:
• An attached 1.8-meter (5.9-foot)
USB extension cable.
• Attractive design complementary
to the Xbox 360 Wireless
Networking Adapter and the Xbox
360 console.
3
WARNING
Before using this product, read
this manual and the Xbox 360
manuals for important safety
and health information. Keep all
manuals for future reference.
For replacement manuals, go to
www.xbox.com/support or call
Xbox Customer Support (see ”If
You Need More Help”).
The limited warranty covering this
product is contained in the Xbox 360
Warranty manual (Volume 2).
Dispose of this product in
accordance with local and national
disposal regulations (if any),
including those governing the
recovery and recycling of waste
electrical and electronic equipment
(WEEE).
english
ATTACH THE ADAPTER TO
YOUR STAND
Your wireless networking adapter is
designed to attach directly to the
adapter stand.
To attach your adapter stand:
1 Press the tabs on the adapter into
the two slots on the stand.
2 Connect the USB connector on the
adapter to the USB port on the
front of the stand.
3 Flip up the antenna.
NOTE
The antenna is designed to swivel
english
on only one axis. Do not swivel
the antenna in any direction other
than parallel with the adapter.
4 Connect the USB connector on the
adapter stand extension cable to
the USB port on the back of the
Xbox 360 console.
4
TROUBLESHOOTING
Console Doesn’t Detect Adapter
on Stand
Make sure all USB connectors are
firmly and fully inserted on the stand
and in the console.