Microsoft XBOX 360 S-VIDEO AV CABLE User Manual

S-VIDEO AV CABLE

CÂBLE AUDIO/VIDÉO S-VIDÉO
CABLE DE AUDIO/VIDEO S-VIDEO

english

3

English

9

Français

15

Español

english

3

Thanks for choosing the Xbox 360
S-Video AV Cable to connect your
Xbox 360 console to S-video and
analog or digital audio input on your
TV. It is for use exclusively with the
Xbox 360™ video game and
entertainment system.

Before using this product, read this

manual and the Xbox 360 console
manuals for important safety and
health information. Keep all
manuals for future reference.
For replacement manuals, go to
www.xbox.com/support or call
Xbox Customer Support (see ”If
You Need More Help”).

The limited warranty covering
this peripheral is contained in
the Xbox 360 Warranty manual
(Volume 2).

Dispose of this product in
accordance with local and national
disposal regulations (if any),
including those governing the
recovery and recycling of waste
electrical and electronic
equipment (WEEE).

!

WARNING

ENGLISH

Xbox 360 S-Video AV Cable

4

english

CONNECT YOUR S-VIDEO
AV CABLE

Use your Xbox 360 S-Video AV Cable
cable to connect your console to a
TV and an audio system.

IMPORTANT

Stationary images in video games
can “burn” into some TV screens,
creating a permanent shadow.
Consult your TV owner’s manual or
manufacturer before playing games.

To connect to TV and audio:

1 Turn off your console.
2 Connect the AV connector on the

S-video cable to the AV port on
your console.

3 Connect the S-video connector on

the S-video cable to the S-video
input on your TV. Leave the yellow
composite video connector
unconnected.

4 Connect the left and right (white

and red) audio connectors on the
S-video cable to the audio input
on your TV, receiver, or amplified
speaker system.

5 Turn on your console. From the

System area, you can change
your display settings. Select the
appropriate screen size and
resolution for your TV.

If your system (typically, a receiver
or amplifier) has digital audio input,
you can connect to digital audio
rather than to the standard left and
right audio inputs. Digital audio input
should produce higher-quality sound.

english

5

To connect your console to
digital audio:

1 Connect the S-Video AV cable as

described in steps 1–3 of “To
connect to TV and audio.”

2 Connect your digital audio cable

(not included) to the digital audio
input on your receiver or TV and
the digital audio output on the
console end of the S-Video AV
cable connector.

3 Turn on your console. From the

System area, you can change your
audio and digital output settings.
Select the appropriate digital audio
setting for your system.

TROUBLESHOOTING

If you encounter problems, try the
possible solutions provided below.

Picture with No Sound

Make sure the video and audio
connectors are connected to the
same input group on the back of
your TV. If you’re using digital audio,
make sure the receiver is turned on
and the output is correctly set in the
Xbox Dashboard.

Sound with No Picture

Verify that the TV is turned on. Make
sure the audio and video connectors
are connected to the same input
group on the back of your TV. If
you’re using digital audio, make sure
the TV has been set to display the
input group into which the S-video
cable is plugged.

6

english

IF YOU NEED MORE HELP

Please go to www.xbox.com/support
or call Xbox Customer Support:

United States and Canada:
1-800-4MY-XBOX (1-800-469-9269)
TTY users: 1-866-740-XBOX
(1-866-740-9269)

Mexico: 001-866-745-83-12
TTY users: 001-866-251-26-21

Colombia: 01-800-912-1830
Do not take your Xbox 360 console

or its peripherals to your retailer for
repair or service unless instructed to
do so by an Xbox Customer Support
representative.

!

Do Not Attempt Repairs

Do not attempt to take apart,

service, or modify the Xbox 360
console, power supply, or its
peripherals in any way. Doing so
could present the risk of serious
injury or death from electric
shock or fire, and it will void
your warranty.