Microsoft RX-33 User Manual
Wega RX-33 User Guide
BONDING / PAIRING PHONES.................................................................................. 1
BONDING / PAIRING A NEW PHONE ..............................................................................................................................1
CONNECTING TO A PREVIOUSLY BONDED / PAIRED PHONE............................................................................................2
DELETING A PREVIOUSLY BONDED / PAIRED PHONE......................................................................................................2
DELETING ALL PREVIOUSLY BONDED / PAIRED PHONES ................................................................................................ 2
INCOMING CALLS........................................................................................................ 2
ACCEPTING AN INCOMING CALL....................................................................................................................................2
ENDING A CALL IN PROGRESS.......................................................................................................................................2
SCREENING AN INCOMING CALL....................................................................................................................................3
OUTGOING CALLS........................................................................................................ 3
"DIAL NUMBER" VIA VR...............................................................................................................................................3
"REDIAL" VIA VR.........................................................................................................................................................3
"DIAL NAME" VIA VR...................................................................................................................................................3
"REDIAL" VIA ACM......................................................................................................................................................3
"CALL HISTORY" VIA ACM ...........................................................................................................................................3
"ENDING CALLS"..........................................................................................................................................................4
PHONEBOOK ENTRIES................................................................................................ 4
"MOBILE-EASE" PHONEBOOK....................................................................................................................................4
"PHONE'S" PHONEBOOK ...............................................................................................................................................4
CONFORMANCE............................................................................................................ 5
FCC AND INDUSTRY CANADA NOTICE...........................................................................................................................5
EXPORT CONTROLS ......................................................................................................................................................5
BLUETOOTH WIRELESS HTECHNOLOGY TRADEMARK......................................................................................................5
BONDING / PAIRING PHONES
Bonding / Pairing a New Phone
The following will show the steps required to add a new phone to the system.
Note: The phone being connected must have Bluetooth
Using the button and the buttons on the ACM (audio control module),
proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to ADD PHONE and select using MUTE/PHONE.
4. The ACM will display BONDING and then the PIN number to be entered. The Bluetooth module
will remain in the bonding state for 5 minutes while you then put your phone in "search" mode to
find the car's Bluetooth device, Mobile-Ease. Your phone's user manual will aid in this function if
unclear.
®
functionality enabled.
Connecting to a Previously Bonded / Paired Phone
The following will show the steps required to connect to a previously bonded / paired phone.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to SELECT PHONE and select using MUTE/PHONE
4. Use SEEK buttons to navigate to desired phone and select using MUTE/PHONE. The ACM will
then display "connecting". You should then see the name of your phone and then "connected."
Deleting a Previously Bonded / Paired Phone
The following will show the steps required to delete a previously bonded/paired phone.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to DELETE PHONE and select using MUTE/PHONE.
4. Use SEEK buttons to navigate to desired phone and select using MUTE/PHONE. The ACM will
then display "CONFIRM DEL". Press MUTE/PHONE and the phone will be deleted.
Deleting All Previously Bonded / Paired Phones
The following will show the steps required to delete all previously bonded/paired phones.
Using the button and the buttons on the ACM, proceed as follows:
1. Press MUTE/PHONE to access the main menu.
2. Use SEEK buttons to navigate to BLUETOOTH and select using MUTE/PHONE.
3. Once inside the Bluetooth directory navigate to DELETE ALL and select using MUTE/PHONE.
4. The ACM will then display "CONFIRM DEL". Press MUTE/PHONE and all previously bonded/paired
phones will then be deleted.
INCOMING CALLS
Accepting an Incoming Call
When receiving a call there are two methods of accepting the call 1) by pressing the
MUTE/PHONE button on the ACM and 2) pressing the SEND button on the SWC.
Ending a Call in Progress
To end a current call there are two methods, 1) by pressing the MUTE/PHONE button on the
ACM, and 2) pressing the END button on the SWC.
Loading...