Microsemi Corporation MXP6501 Datasheet

2830 S. Fairview St.

Features

Maximum Ratings

Electrical Characteristic @ 25

Input Diode

Output Detector

Santa Ana, CA 92704 (714) 979-8220

• Ambient Temperature Range -40°C to +85°C

• VCC Range 4.5V to 18V

• Supply Current 3.5mA max @ 5V

• Output sinks 16mA @ 400mV max

• Optical sensitivity adjustable

Voltage at VCC -0.5V to +20V Voltage at OUT (Outputt off) -0.5 to + 20V Current Info OUT (Output On) 30mA

Symbol Parameter Min. Typ. Max. Units Test Conditions

Reverse Voltage 2.0 V Forward Voltage 1.95 V IF = 100mA Radiant Power Ouput 4.0 7.5 mW IF = 100mA

IR = 10µA

MXP6501

Opto Coupler

With

Logic Output

and

Adjustable

Optical

Threshold

6 Pin LCC

Parameter Symbol Min. Typ. Max. Units Test Conditions

Vcc Voltage Range VccR 4.5 5 18 V Supply Current @ 5V (Output Low) Icc5L 1.5 2.1 2.9 mA LED ON; ADJ OPEN Supply Current @ 5V

(Output High) Supply Current @ 18V (Output Low) Icc18L 2.9 4.0 5.6 mA LED ON; ADJ OPEN Supply Current @ 18V (Output High) Icc18H 2.2 3.1 4.4 mA LED OFF; ADJ OPEN Low Level Output Voltage @ 16mA

(Vcc = 4.5V) Low Level Output Voltage @ 16mA

(Vcc = 18V High Level Output Voltage @ 100µA

(Vcc = 4.5V) High Level Output Voltage @ 100µA

(Vcc = 18V) Output Rise Time (Vcc = 5V) t Output Rise Time (Vcc = 5V) t

NOTES:

1. Due to the high sensivity of this device, a .01mF bypass capacitor is recommended (VCC to ground)

2. Optical threshold may be raised by connecting ann external resistor from adjust to ground.

External Adjust Resistor OPEN 1.00 10K 1.95

4.7K 2.73

2.2K 3.80 1K 4.98 (SHORT) 7.23

Icc5H 1.8 2.5 3.5 mA LED OFF; ADJ OPEN

VOL 1 - 35 400 mV LED ON; ADJ OPEN

VOL 2 - 41 400 mV LED ON; ADJ OPEN

VOH1 3.0 4.5 4.5 V LED OFF; ADJ OPEN

VOH2 - 17.5 18.0 V LED OFF; ADJ OPEN

Typical Normalized Optical Threshold

- 44.0 60.0 nS Cl = 15 pF

- 16 30 nS Cl = 15 pF

Schematic

Datasheet#MSC0319A.DOC Date: 07/07/97