Michell Instruments Easidew Portable Specifications

Portable Instruments
Easidew Portable
Portable Universal Hygrometer
Simple to use and rugged, the Easidew portable hygrometer is the ideal tool for a wide range of on-site maintenance spot checks and dry dew-point online measurements. The robust integral sample system and wide measurement range ceramic metal-oxide moisture sensor provide an accurate moisture measurement in a broad range of dew-point applications.
• Spot-check measurements to -60°C dew point
• 16 hours operation between recharging
• Sample at pressure or atmospheric
• Accuracy +/-2°C dew point
Traceable 13-point calibration certicate
• Rugged industrial design
• Compact and simple to use
• Sample connection kits
• Online moisture measurements -100 to +20°C dew point
www.michell.com
Applications
• Compressed air
• Gas generators
• Railway pneumatics
• Plastic moulding dryers
• Additive manufacturing
• Instrument air
Portable Instruments
Easidew Hygrometer
The Universal Moisture Portable
The Easidew Hygrometer has been designed to make dew-point spot checks down to -60°C dew point, and online measurements across -100 to +20°C dew point, as simple as possible. This completely self-contained instrument weighs just 4kg and is delivered ready to use. Simply connect your sample gas to the Quick Connect (or optional Swagelok®) ttings, turn on the instrument and it will begin to measure/display the dew point of the applied sample.
Extended Field Use
The Easidew uses a rechargeable NiMH battery pack and is
delivered complete with a universal battery charger that ts
neatly into the instrument lid. It will operate for up to 16 hours on a full charge.
Fully Integrated Sampling System
The Easidew is unique among portable hygrometers. Michell Instruments has built into the standard design, a complete sampling system that easily allows you to measure the dew point of any air or gas line, at up to 2 Mpa (20 barg)
pressure. The two interchangeable inlet/outlet ttings allow
you to choose between dew point measured at atmospheric or line pressure, by simply swapping the position of the
ttings. An integrated lter housing uses standard lter
cartridges and provides 99.5% protection against particles down to 0.3µm. Optionally, Swagelok® tube couplings can
be specied to allow operation of the unit at up to 30 Mpa
(300 barg).
Measurement Performance
Field Replaceable Integral Sensor
The ceramic metal-oxide moisture-sensing technology is coupled with the latest microprocessor-based measurement circuitry to produce a 13-point traceable calibrated and interchangeable sensor transmitter module. All calibration data is stored in the sensor memory, so on-site sensor exchange for calibration or service can be performed quickly, by untrained personnel.
Easy to Read
The hygrometer features an extremely clear and bright
0.5” red LED display, making it easy to determine the dew point of your process even in dim conditions or direct sunlight. Michell also provides a 4–20 mA analog output for connection to a chart recorder, data-logger or computer system, so dew-point trends can be analyzed over time.
Rugged Field-Use Design
The Easidew is rugged, and easy to carry and use. It is small, with an ergonomic carrying handle, and weighs only 4kg. The case of the hygrometer provides NEMA 6 protection and the outer case is covered by a lifetime guarantee, so can be returned to the factory for repair or replacement, free of charge.
Reproducibility and Calibration Integrity
The Easidew ceramic metal-oxide moisture sensors are subject to a 13-point calibration, where their performance is characterized against a fundamental reference hygrometer. This process, and subsequent quality testing, ensures that all
sensors behave optimally before they are used in the eld.
The transmitter uses Michell’s market-leading ceramic metal-oxide measurement technology coupled with the latest-generation, sophisticated microcontroller electronics to provide accurate and stable measurement across the product life of the transmitter.
• Accuracy ±2 °C dew point
• Excellent long-term stability
Traceable Calibration
Each Easidew is supplied with a calibration traceable to national standards (NPL & NIST) from Michell Instruments’ accredited laboratory.
Accessories and Spares
The Easidew is available with a supporting range of practical accessories and spares that can be stored within the lid of the portable, whilst being used on site:
Connector ttings
• Filters
• Guards
• Tubing
• Battery pack
• Charger
Customization
If your application requires a customized portable, we have specialized design and manufacturing capability to cover your requirements.
www.michell.com
Portable Instruments
Technical Specications
Performance Specications
Measurement Range
(Non-standard ranges available on request)
Accuracy
Repeatability 0.5 °C dew point
Calibration 13-point calibration certicate traceable to national standards
Electrical Specications
Output Signal User congurable over range; 4–20 mA (2-wire connection, current source)
Moisture Display/Output
Power Supply Rechargable NiMH battery pack with 16-hour life from full charge
Battery Charger Universal battery charger included
Electrical Safety EN61010-1
Operating Specications
Operating Temperature
Compensated Temperature Range
Storage Temperature
Spot-checking: -60 to +20 °C dew point
Online monitoring: -100 to +20°C dew point
±2 °C dew point
Dew point
-20 °C to +50 °C
-20 °C to +50 °C
-20 °C to +60 °C
Maximum Operating Pressure
Recommended Flow Rate
Sampling System Conguration
Low-pressure version (LP)
High-pressure version (HP)
2 MPag (20 barg)
30 MPag (300 barg)
1 to 5 Nl/min
Pressurized or atmospheric
Mechanical Specications
Ingress Protection NEMA Type 6*
Display Type
Carry Case
Weight 4kg
Sample Block
Filter Cartridge
Sample Connections
Sample Tubing
Low-pressure version (LP)
High-pressure version (HP)
NOTES * NEMA Type 6 when case closed
Stainless steel, fully self-contained sample system with xed orice ports for ow control/pressure
Yellow Peli propylene case with internal storage of charger, sample tube
or atmospheric measurement and built-in ltration using a standard drop-in cartridge
Removes 99.5% of particles ≥0.3μm supplied with cartridge installed.
Flush mounted 3.5 digit red LED
accessories and output connector
Spare cartridges are available
Optional: Legris pneumatic ttings
6mm Swagelok® tube ttings 1/4” Swagelok® tube ttings
2m of 6mm O/D PTFE supplied
Metering valve and port adaptor
www.michell.com
Portable Instruments
-30.5
1/8” BSPT thread
Particulate filter cartridge
274mm
10.8”
124mm
4.8”
250mm
9.8”
Storage pocket
for battery
charger
Storage pocket for tubing and spare filters
IP67 (NEMA 6) polypropylene case
Gas in/out ports with interchangeable fittings
Power switch, fuse and current output socket
Easidew sensor
Easidew Hygrometer
Product Dimensions
Related Industrial Products
Easidew Tx
Industrial Dew-Point
Transmitter
Easidew Online
Dew-Point Hygrometer
Industrial Dew-Point
Oxygen Sensor Transmitter
SF82
Transmitter
Senz-TX
MDM50 Portable
Hygrometer
YellowBox Portable
Portable Oxygen Analyzer
MDM300
Dew-Point Hygrometer
Optidew 501
Chilled Mirror Hygrometer
Michell Instruments Ltd 48 Lancaster Way Business Park, Ely, Cambridgeshire, CB6 3NW Tel: +44 (0) 1353 658000, Fax: +44 (0) 1353 658199, Email: uk.info@michell.com, Web: www.michell.com/uk
Michell Instruments adopts a continuous development programme which sometimes necessitates specication changes without notice. Issue no: Easidew Portable_97157_V5.2_UK_0620
© 2020 Michell Instruments
Loading...