Metro SXRD43CM4 User Manual

C

L

E

A

N

D

E

S

I

G

N

S T A R S Y S™ S U P P L Y U N I T S

Mobile Units are stand-alone products.
Mobile units are available in single (22

1

(42

/2" [1080mm]) and triple (621/2" [1558mm]) widths. The
overall height of a tall mobile unit is 78
(299mm) with sloped tops. All units are 24

General Overview:

The configurable interior space is 66" (1676mm) on a tall unit.
Short units interior space from 24" (610mm) to 48" (1219mm)
in 3" (76mm) increments.

Triple-width units must be divided into a single & double bay or
three single bays — there are no triple wide accessories.

The specification of a qwikSLOT interior or an empty interior will
necessitate an extended mobile base as part of the configuration.

Starsys Mobile Units have a total recommended load rating of 900
lbs. (408kg) including the weight of the Starsys unit.

Units feature two 5" (127mm) casters — the front two casters have
color-matched toe-brakes.

®

Microban
odor-causing bacteria on Starsys, keeping the surface areas “cleaner
between cleanings.”

To configure a Starsys unit to your exact specifications, please visit www.metroconfigurator.com

antimicrobial protection inhibits the growth of stain and

3

/4" [578mm]), double

1

/3" (1990mm). Add 113/4"

7

/8" (632mm) deep.

Tall Stationary Units are stand-alone products or may be used in
conjunction with other tall units or Starsys product families. Tall
stationary units are available in single and double widths only.

General Overview:

The overall height of a tall stationary unit is 72

3

11

/4" (299mm) with sloped tops. Overall widths are 211/2" (546mm)

for singles and 41

The configurable interior space is 66" (1676mm).

Filler kits are available to fill gaps between units, between the back
of a unit and the wall (25" [635mm] & 30" [762mm] depths) and
between tall units interfacing at 45 or 90 degrees.

All tall units must be affixed to the wall with appropriate mounting
hardware utilizing the attached Starsys mounting bracket or affixed
to the floor with the optional floor mounting kit.

Tall units are not intended to support cantilevered
countertop sections.

1

/3" (1049mm) for doubles.

1.800.992.1776 • WWW. M E TR O.COM

1

/2" (1842mm). Add

147

S T A R S Y S™ P R E C O N F I G U R E D S U P P L Y M O B I L E U N I T S

Cat. No. SXRD43CM3

Cat. No. SXRS76CMHD2

Cat. No. SXRD43CM4
(2) Wire shelves,
non-locking doors

Cat. No. SXRSGS1
(3) Poly shelves,
non-locking door

Cat. No. SXRDGS1

Cat. No. SXRSGS2

Cat. No. SXRS76CM5
(4) Wire shelves,
non-locking door

Cat. No. SXRD76CM3
(4) Wire shelves,
non-locking door

Extended Handle

Cat. No. SXRTGS2
(6) Poly shelves behind upper doors,
(5) Wire shelves right bay, non-locking doors

Accessories

List
Price
Description Cat. No. Each

Extended Handle Assembly 4" ([102mm] H.x211/2" [546mm] W.x 41/4" [108mm] L.)

Extended Handle Assembly — KD SXREHAN-KD 168.50

Cat. No. SXRTGS3
(7) Double-side wire shelves in left bay,
(5) single-wide wire shelves in right bay
non-locking doors

SXREHAN 161.50

Starsys Carts are built to exact customer specifications, therefore, they are non-cancelable, non-returnable.

148

1.800.992.1776 • WWW. M E TR O.COM

Note:

See pages 138-140
for specialty carts
and accessories
(i.e. catheter, suture,
I.V., instrument).

S T A R S Y S™ P R E C O N F I G U R E D S U P P L Y C A B I N E T S

Cat. No. SXRS72TU2

Cat. No. SXRD72TU2
Poly shelves, locking doors

Cat. No. SXRS72TU3

Cat. No. SXRD72TU3
(2) Poly shelves in left bay, (5) wire shelves in
right bay, non-locking doors

Cat. No. SXRS72TU4

Cat. No. SXRD72TU5
(5) Wire shelves, non-locking doors

Cat. No. SXRD72TU6
(5) Wire shelves, locking doors

Cat. No. SXRD72SCATH2
(2) Poly shelves, non-locking door
(left), locking door (right)

To configure a Starsys unit to your exact specifications, please visit www.metroconfigurator.com

1.800.992.1776 • WWW. M E TR O.COM

149

SXRSGS1

(2) 9 (229mm) Polymer Drawer

(

)

( p )

ActualUnithasTaupePulls

PreconfiguredTallMobileUnits

General Supply

SXRSGS1 includes:

Single-Wide Tall Mobile Shell with Slotted Polymer Inne r Pane ls
(3) Polymer Shelves (No upper door)
Left-Hinged 270° Solid Locking Upper Door (Keylock/2 keys)
Mid-Level Drawertop Shelf
(1) 3” (76mm) Polymer Drawer

”
Taupe Drawer Pulls
Outer & Inner Panels
Middle Open Storage Area
Interior Upper Dimensions
Overall Dimensions

SXRSGS2 includes:

Single-Wide Tall Mobile Shell with Slotted Polymer Inne r Pane ls
(2) Polymer Shelves (No upper door)
Mid-Level Drawertop Shelf
(2) 3” (76mm) Polymer Drawers
(2) 6” (152mm) Polymer Drawers
(2) 9” (229mm) Polymer Drawer
Taupe Drawer Pulls
Outer & Inner Panels
Interior Upper Dimensions
Overall Dimensions

: MoldedHDPE(Hi‐DensityPolyethylene)

: 12”H (304mm) x 17"W (432mm) x 22"D (559mm)

: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)

: 78.3”H (1990mm) x 22.8"W (578mm) x 24.9"D (632mm)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 27”H (686mm) x 17"W (432mm) x 22"D (559mm)

: 78.3”H (1990mm) x 22.8"W (578mm) x 24.9"D (632mm)

SXRSGS2

SXRS76CM5

SXRS76CM5 includes:

Single-Wide Tall Mobile Shell with qwikSLOT Inserts
(4) Fixed Chrome Wire qwikSLOT Shelves
Right-Hinged 270° Solid Non-Locking Tall Door
Taupe Door Pull
Outer & Inner Panels
Interior Dimensions
Overall Dimensions

: Molded HDPE (Hi-Density Polyethylene)
: 66”H (1676mm) x 18"W (457mm) x 22"D (559mm)
: 78.3”H (1990mm) x 22.8"W (578mm) x 27.9"D (709mm)

5.1.11

1

SXRS76CMHD2

(4)

() q

D

q

)

q()

Preconfigured Tall Mobile Units

General Supply

SXRS76CMHD2 includes:

Single-Wide Tall Mobile Shell with quikSLOT Inserts & Mid-Level Drawer Lock
Module (Keylock/2 keys) (No upper door)
(2) Single-Wide Fixed Chrome Wire qwikSLOT Shelves
(2) 3” (76mm) Heavy-Duty
(3) 6” (152mm) Heavy-Duty
(1) 9” (229mm) Heavy-Duty
Taupe Drawer Pulls
Outer & Inner Panels
Interior Upper Dimensions
Overall Dimensions

: 78.3”H (1990mm) x 22.8"W (578mm) x 27.9"D (709mm)

Stainless Steel Drawers

Stainless Steel Drawers
Stainless Steel Drawer

: MoldedHDPE(Hi‐DensityPolyethylene)

: 30”H (762mm) x 18"W (457mm) x 22"D (559mm)

SXRS83MGST

SXRS83MGSTD includes:

Single-Wide Tall Mobile Shell with quikSLOT Inserts & Full-Height Pull-Down
Locking Tambour Door

Fixed Chrome Wire qwikSLOT Shelves
Outer & Inner Panels: MoldedHDPE(Hi‐DensityPolyethylene)
Interior Dimensions
Overall Dimensions

SXRDGS1 includes:

Double-Wide Tall Mobile Shell with
(3) Double-Wide Fixed Chrome Wire qwikSLOT Shelves
(4) Double-Wide Full-Extension Chrome Wire Shelves
Outer Panels
Interior Dimensions
Overall Dimensions

: MoldedHDPE(Hi‐DensityPolyethylene)

(Keylock\2 keys)

: 66”H (1677mm) x 17"W (432mm) x 23"D (584mm)

: 82.5”H (2096mm) x 22.8"W (578mm) x 27.9"D (709mm)

wikSLOT Inserts (no door

: 66”H (1677mm) x 38"W (966mm) x 22"D (559mm)

: 78.3”H (1990mm) x 42.5"W (1080mm) x 27.9"D (709mm)

SXRDGS1

2

SXRD76CMHD1

(2) 6 (152mm) Double

Wide Heavy

Duty Stainless Steel Drawers

Center

Closing 270

°

Solid Non

Locking Tall Door Set

Preconfigured Tall Mobile Units

General Supply

SXRD76CMHD1 Includes:

Double-Wide Tall Mobile Shell with quikSLOT Inserts
(3) Double-wide qwikSLOT Chrome Wire Shelves (Behind upper door set)
Center-Closing 225° Solid Non-Locking Upper Door Set
Mid-Level Double-Wide Drawer Top Shelf (Non-locking)
(2) 3” (76mm) Double-Wide Heavy-Duty Stainless Steel Drawers

”
(1) 9” (229mm) Double-Wide Heavy-Duty Stainless Steel Drawer
Taupe Drawer & Door Pulls
Outer Panels
Interior Upper Dimensions
Overall Dimensions

: MoldedHDPE(Hi‐DensityPolyethylene)

-

: 36”H (915mm) x 38"W (966mm) x 22"D (559mm)

: 78.3”H (1990mm) x 42.5"W (1080mm) x 27.9"D (709mm)

-

SXRD76CM3

SXRD76CM3 includes:

Double-Wide Tall Mobile Shell with quikSLOT Inserts
(4) Double-wide qwikSLOT Chrome Wire Shelves (Behind upper door set)

­Taupe Drawer Door Pulls
Outer Panels
Interior Dimensions
Overall Dimensions

SXRD83MGSTD includes:

Double-Wide Tall Mobile Shell with quikSLOT Inserts & Full-Height Pull-Down
Locking Tambour Door
(4) Double-Wide Fixed Chrome Wire qwikSLOT Shelves
Outer Panels
Interior Dimensions
Overall Dimensions

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 38"W (966mm) x 22"D (559mm)

: 78.3”H (1990mm) x 42.5"W (1080mm) x 27.9"D (709mm)

(Keylock\2 keys)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 38"W (966mm) x 23"D (584mm)

: 82.5”H (2096mm) x 42.5"W (1080mm) x 27.9"D (709mm)

-

SXRD83MGSTD

3

(3) 3 (76mm) Polymer Drawer

SXRTGS2

Interior Left & Middle Upper Dimensions

: 33 H (839mm) x 17 W (432mm) x 22 D

(4) Single

Wide Full

Extension Chrome Wire Shelves

Preconfigured Tall Mobile Units

General Supply

SXRTGS2 includes:

Triple-Wide Tall Mobile Shell with Slotted Polymer Inner Panels , qwikSLOT Inserts
(Right Bay) & Left-Side Push/Pull Handle
Left Bay
(3) Polymer Shelves (behind door)
Left-Hinged 225° Solid Non-Locking Upper Door
Mid-Level Drawertop Shelf (Non-locking)

”
(2) 6” (152mm) Polymer Drawers
(1) 9” (229mm) Polymer Drawer
Middle Bay
(3) Polymer Shelves (behind door)
Right-Hinged 225° Solid Non-Locking Upper Door
Mid-Level Drawertop Shelf (Non-locking)
(2) 6” (152mm) Polymer Drawers
(2) 9” (229mm) Polymer Drawers
Right Bay
(2) Fixed Chrome Wire qwikSLOT Shelves
(3) Full-Extension Chrome Wire Shelves
Right-Hinged 270° Solid Non-Locking Tall Door
Slate Blue Drawer & Door Pulls
Outer & Inner Panels

(559mm)
Interior Right Bay Dimensions
Overall Dimensions

: MoldedHDPE(Hi‐DensityPolyethylene)

”

: 66”H (1677mm) x 18"W (458mm) x 22"D (559mm)

: 78.3”H (1990mm) x 65.7"W (1669mm) x 27.9"D (709mm)

"

"

SXRTGS3

(ActualUnithasSlateBluePulls.
Handleincludedbutnotshown.)

SXRTGS3 includes:

Triple-Wide Tall Mobile Shell with quikSLOT Inserts & Left-Side Push/Pull Handle
Left Bay (Double-Wide)
(3) Double-Wide Fixed Chrome Wire qwikSLOT Shelves
(4) Double-Wide Full-Extension Chrome Wire Shelves
Center Closing 225° Solid Locking Door Set (Keylock/2 keys)
Right Bay (Single-wide)
(2) Single-Wide Fixed Chrome Wire qwikSLOT Shelves

­Right-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Slate Blue Door Pulls
Outer & Inner Panels
Interior Left Bay Dimensions
Interior Right Bay Dimensions
Overall Dimensions

-

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 38"W (966mm) x 22"D (559mm)

: 66”H (1677mm) x 18"W (457mm) x 22"D (559mm)

: 78.3”H (1990mm) x 65.7"W (1669mm) x 27.9"D (709mm)

4

SXRS76MCATH1

Outer & Inner Panels

:

MoldedHDPE(Hi

DensityPolyethylene)

Slides, (30) Catheter Hooks & Labels

Preconfigured Tall Mobile Units

Catheter Storage

SXRS76MCATH1 includes:

Single-Wide Tall Mobile Shell with Slotted Polymer Inne r Pane ls
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels

Left-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Outer & Inner Panels
Interior Dimensions: 66”H (1676mm) x 17"W (432mm) x 22"D (559mm)
Overall Dimensions

SXRS83MCATHTD includes:

Single-Wide Tall Mobile Shell with Slotted Inner Panels & Full-Height Pull-Down
Locking Tambour Door
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels

(1) Polymer Shelf
Interior Dimensions: 66”H (1677mm) x 17"W (432mm) x 23"D (584mm)

Overall Dimensions

: Molded HDPE (Hi-Density Polyethylene)

: 78.3”H (1990mm) x 22.8"W (578mm) x 24.9"D (632mm)

(Keylock\2 keys)

: 82.5”H (2096mm) x 22.8"W (578mm) x 27.9"D (709mm)

‐

SXRS83MCATHTD

SXRD83MCATHTD

SXRD83MCATHTD includes:

Double-Wide Tall Mobile Shell with Slotted Inner Panels & Full-Height Pull-Down
Locking Tambour Door
(2) Catheter Storage Modules (Includes (2) Catheter Shelves, (6) Catheter

(2) Polymer Shelves
Outer & Inner Panels
Interior Bay Dimensions
Overall Dimensions

(Keylock\2 keys)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 17"W (432mm) x 23"D (584mm)

: 82.5”H (2096mm) x 42.5"W (1080mm) x 27.9"D (709mm)

5

Preconfigured Tall Mobile Units

Left

Hinged 270

Solid Locking Tall Door (Keylock/2 keys)

SXRD76MCATH2

includes

:

Outer & Inner Panels

:

MoldedHDPE(Hi

DensityPolyethylene)

Catheter Storage

SXRD76MCATH1 includes:

Double-Wide Tall Mobile Shell with Slotted Polymer Inner Panels
Left Bay
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels

­Right Bay
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels
Right-Hinged 270° Solid Locking Tall Door (Keylock/2 keys)
Taupe Door Pulls
Outer & Inner Panels
Interior Bay Dimensions

SXRD76MCATH1 Overall Dimensions: 78.3”H (1990mm) x 42.5"W (1080mm) x 24.9"D (632mm)

°

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 17"W (432mm) x 22"D (559mm)

SXRD76MCATH2

Double-Wide Tall Mobile Shell with Slotted Polymer Inner Panels & Left-Side
Push/Pull Handle
Left Bay
(2) Polymer Shelves (behind door)
Left-Hinged 225° Solid Non-Locking Upper Door
Mid-Level Drawertop Shelf (Non-locking)
(1) 3” (76mm) Polymer Drawer
(2) 6” (152mm) Polymer Drawers
(2) 9” (229mm) Polymer Drawers
Right Bay
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels
Right-Hinged 270° Solid Locking Tall Door (Keylock/2 keys)
Taupe Drawer & Door Pulls

Interior Left Upper Dimensions: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)
Interior Right Bay Dimensions
Overall Dimensions

: 78.3”H (1990mm) x 45.9”H (1166mm) x 24.9"D (632mm)

: 66”H (1677mm) x 17"W (432mm) x 22"D (559mm)

‐

6

Preconfigured Tall Mobile Units

Standard Drawer Tote Specs

3” Drawer Tote

6” Drawer Tote

9” Drawer Tote

3” Drawer Tote

WeightCapacities:

3”Tote=25lbs.(11.3Kg)
6”&9”Totes=40lbs.(18.1Kg)

7

Preconfigured Tall Mobile Units

y

Metro Part #

HWDHWDLbs

Kg

p

pp

Heavy Duty Drawer Specs

Above:Double‐Wide3”HeavyDutyDrawer

Left:Single‐WideHeavyDutyDrawers

Inside Dimensions

Single-Wide HD Drawers

3" Heavy Du t y Dwr 2.3 16.3 19.2 58 414 487 100 45.4
6" Heavy Du t y Dwr 5.3 16.3 19.2 134 414 487 100 45.4
9" Heavy Du t y Dwr 8.3 16.3 19.2 210 414 487 100 45.4
12" Heav y Du ty Dwr 11.5 16.3 19.2 292 414 487 100 45.4

Doub le-Wide HD Drawers

3" Heavy Du t y Dwr 2.3 36.3 19.2 58 922 487 150 68
6" Heavy Du t y Dwr 5.3 36.3 19.2 134 922 487 150 68
9" Heavy Du t y Dwr 8.3 36.3 19.2 210 922 487 150 68
12" Heav y Du ty Dwr 11.5 36.3 19.2 292 922 487 150 68

Construction: The drawer interior is composed of 16 and 18 gauge solid

stainless steel. The drawer slides are full-extension, zinc-plated steel with
chrome-plated ball bearings, and attach to qwikSLOT inserts. They have side
lever releases and detents in the closed position. The slide travel distance is

20.75”. The drawer front surface is composed of molded ABS polymer, colored in
Metro Taupe. Snap-on handles (“pulls”) attach above the top recessed area and
are available in a variety of colors. Optional self-adhesive label holders

ositioned in the recessed area under the pulls are also offered.

Inches Millimeters

t Capacit

8

SXRS72TU2

(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

Interior Upper Dimensions

: 66”H (1676mm) x 17"W (432mm) x 22"D (559mm)

O

SXRS72TU4

PreconfiguredTallStationaryUnits

General Supply

SXRS72TU2 includes:

Single-Wide Tall Stationary Shell with Slotted Polymer Inner Panels & Mid-Level
Drawer Lock Module (Keylock/2 keys)
(2) Polymer Shelves (No upper door)
(2) 3” (76mm) Polymer Drawers
(3) 6” (152mm) Polymer Drawers
(1) 9” (229mm) Polymer Drawer
Slate Blue Drawer Pulls
Outer & Inner Panels
Interior Upper Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory

SXRS72TU3 includes:

Single-Wide Tall Stationary Shell with Slotted Polymer Inner Panels (no door)
(5) Polymer Shelves
Outer & Inner Panels

: MoldedHDPE(Hi‐DensityPolyethylene)

: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)

: 72.5H (1842mm) x 21.5"W (54mm) x 23.4"D (594mm)

: Back Filler Kit (P/N: SXR72BKFLR)

: MoldedHDPE(Hi‐DensityPolyethylene)

SXRS72TU3

Overall Dimensions: 72.5H (1842mm) x 21.5"W (54mm) x 23.4"D (594mm)
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

SXRS72TU4 includes:

Single-Wide Tall Stationary Shell with qwikSLOT Inserts (no door)
(2) Fixed Chrome Wire qwikSLOT Shelves
(3) Full-Extension Chrome Wire Shelves

uter Panels: MoldedHDPE(Hi‐DensityPolyethylene)
Interior Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: 66”H (1676mm) x 18"W (457mm) x 22"D (559mm)
: 72.5H (1842mm) x 21.5"W (54mm) x 23.4"D (594mm)

: Back Filler Kit (P/N: SXR72BKFLR)

: Back Filler Kit (P/N: SXR72BKFLR)

5.1.11rs

1

SXRS72TUHD2

(1) 9 (229mm)

Heavy

Duty

Stainless Steel Drawer

Locking

Tambour Door

(Keylock

\

2 keys)

(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

Preconfigured Ta llStationaryUnits

General Supply

SXRS72TUHD2 includes:

Single-Wide Tall Stationary Shell with quikSLOT Inserts & Mid-Level Drawer
Lock Module (Keylock/2 keys) (No upper door)
(1) Back Filler Kit
(2) Single-Wide Fixed Chrome Wire qwikSLOT Shelves
(2) 3” (76mm) Heavy-Duty
(3) 6” (152mm) Heavy-Duty

”
Taupe Drawer Pulls
Outer & Inner Panels
Interior Upper Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with back filler kit)
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: 72.5H (1842mm) x 21.5"W (54mm) x 23.4"D (594mm)

Stainless Steel Drawers

Stainless Steel Drawers

-

: MoldedHDPE(Hi‐DensityPolyethylene)

: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)

SXRS80GSTD

SXRS80SGSTD includes:

Single-Wide Tall Stationary Shell with quikSLOT Inserts & Full-Height Pull-Down
(4) Single-Wide Fixed Chrome Wire qwikSLOT Shelves

Outer Panels
Interior Dimensions
Overall Dimensions
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

SXRS80HGSTD includes:

Single-Wide “Half-Depth” Tall Stationary Shell with Slotted Polymer Inserts &
Full-Height Pull-Down Locking Tambour Door
(4) Single-Wide Half-Depth Fixed Dark Taupe Epoxy-Coated Wire Shelves
Outer & Inner Panels
Interior Dimensions
Overall Dimensions
Optional Recommended Accessory

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 18"W (457mm) x 23"D (584mm)
: 80”H (2032mm) x 21.5"W (54mm) x 24.4"D (620mm)

: Back Filler Kit (P/N: SXRBKFLR25TD)

(Keylock\2 keys)

: MoldedHDPE(Hi‐DensityPolyethylene)
: 66”H (1677mm) x 17"W (432mm) x 15.5"D (394mm)
: 80”H (2032mm) x 21.5"W (54mm) x 18"D (457mm)

: Back Filler Kit (P/N: SXRBKFLR18TD)

SXRS80HGSTD

2

(4)

S

XRD72T

U2

() ( ) y

SU

Optional Recommended Accessory

: Back Filler Kit (P/N: SXR72BKFLR)

(3) 6 (152mm) Polymer Drawers

SXRD72TU3

Preconfigured Ta llStationaryUnits

General Supply

SXRD72TU2 includes:

Double-Wide Tall Stationary Shell with Slotted Polymer Inner Panels & (2) Mid­Level Drawer Lock Modules (Keylock/2 keys per Lock Module)
(6) Polymer Shelves (3 behind each door)
Left-Hinged 225° Solid Top-Locking Locking Door (Keylock/2 keys)
Right-Hinged 225° Solid Top-Locking Locking Door (Keylock/2 keys)

3” (76mm) Polymer Drawers
(6) 6” (152mm) Polymer Drawers
(2) 9” (229mm) Polymer Drawer
Slate Blue Drawer & Door Pulls
Outer & Inner Panels
Interior Upper Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)

(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

SXRD72TU3

Double-Wide Tall Non-Locking Stationary Shell with Left-Bay Slotted Polymer Inner
Panels & Right-bay qwikSLOT Inserts
Left Bay
(2) Polymer Shelves (behind door)
Left-Hinged 225° Solid Non-Locking Upper Door
Mid-Level Drawertop Shelf
(2) 3” (76mm) Polymer Drawers

”
(1) 9” (229mm) Polymer Drawer
Right Bay
(2) Fixed Chrome Wire qwikSLOT Shelves
(3) Full-Extension Chrome Wire Shelves
Right-Hinged 225° Solid Non-Locking Tall Door
Slate Blue Drawer & Door Pulls
Outer Panels
Interior Upper Dimensions: 30”H (762mm) x 17"W (432mm) x 22"D (559mm)
Interior Right Bay Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

includes:

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 17"W (432mm) x 22"D (559mm)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

: Back Filler Kit (P/N: SXR72BKFLR)

3

SXRD72TU5

(without back filler kit); 24.8D (630mm) (with back filler kit)

SXRD72TU6

Preconfigured Ta llStationaryUnits

General Supply

SXRD72TU5 includes:

Double-Wide Tall Stationary Shell with qwikSLOT Inserts (no front center post)
(2) Double-Wide Fixed Chrome Wire qwikSLOT Shelves
(3) Double-Wide Full-Extension Chrome Wire Shelves
Center-Closing 225° Solid Non-Locking Tall Door Set
Slate Blue Door Pulls
Outer Panels
Interior Dimensions: 66”H (1677mm) x 38"W (966mm) x 22"D (559mm)
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

SXRD72TU6 includes:

Double-Wide Tall Stationary Shell with qwikSLOT Inserts (no front center post)
(2) Double-Wide Fixed Chrome Wire qwikSLOT Shelves
(3) Double-Wide Full-Extension Chrome Wire Shelves
Center-Closing 225° Solid Locking Tall Door Set (Keylock/2 keys)
Slate Blue Door Pulls
Outer Panels
Interior Dimensions: 66”H (1677mm) x 38"W (966mm) x 22"D (559mm)
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

: Back Filler Kit (P/N: SXR72BKFLR)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

: Back Filler Kit (P/N: SXR72BKFLR)

SXRD72TUHD2 includes:

Double-Wide Tall Stationary Shell with quikSLOT Inserts & Double-Wide Mid-Level
Drawer Lock Module (Keylock/2 keys)
(1) Back Filler Kit
(3) Double-wide qwikSLOT Chrome Wire Shelves (Behind upper door set)
Center-Closing 225° Solid Top-Locking Locking Upper Door Set (Keylock/2 keys)
Mid-Level Drawer Lock Module
(2) 3” (76mm) Double-Wide Heavy-Duty Stainless Steel Drawers
(3) 6” (152mm) Double-Wide Heavy-Duty Stainless Steel Drawers
(1) 9” (229mm) Double-Wide Heavy-Duty Stainless Steel Drawer
Taupe Drawer & Door Pulls
Outer Panels
Interior Upper Dimensions

SXRD72TUHD2

Overall Dimensions
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 30”H (762mm) x 38"W (966mm) x 22"D (559mm)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

”

4

(4) Double

Wide Fixed Chrome Wire qwikSLOT Shelves

SXRD80SGSTD

(

)

()()()

General Supply

SXRD80SGSTD includes:

Double-Wide Tall Stationary Shell with quikSLOT Inserts & Full-Height Pull­Down Locking Tambour Door

­Outer Panels: MoldedHDPE(Hi‐DensityPolyethylene)
Interior Dimensions
Overall Dimensions
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: 66”H (1677mm) x 38"W (966mm) x 23"D (584mm)
: 80”H (2032mm) x 41.4"W (1052mm) x 25.3"D (643mm)

(Keylock\2 keys)

: Back Filler Kit (P/N: SXRBKFLR25TD)

SXRD80HGSTD

SXRD80HGSTD includes:

Double-Wide “Half-Depth
Height Pull-Down Locking Tambour Door
(4) Double-Wide Half-Depth Fixed Dark Taupe Epoxy-Coated Wire Shelves
Outer Panels
Interior Dimensions
Overall Dimensions: 80”H
Optional Recommended Accessory : Back Filler Kit (P/N: SXRBKFLR18TD)
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

” Tall Stationary Shell with quikSLOT Inserts & Full-

(Keylock\2 keys)

: 66”H (1677mm) x 38"W (966mm) x 15.5"D (394mm

2032mm) x 41.4"W (1052mm) x 18"D (457mm

5

SXRS72SCATH1

Outer & Inner Panels

:

MoldedHDPE(Hi

DensityPolyethylene)

(1)

()

g( ,() ,()

(1)

Half-Depth Catheter Storage Module (Includes Half

Depth Catheter Shelf, (3)

(

)

(y() q p g )

Preconfigured Ta llStationaryUnits

Catheter Storage

SXRS72SCATH1 includes:

Single-Wide Tall Stationary Shell with Slotted Polymer Inner Panels
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels

Left-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Interior Upper Dimensions: 66”H (1676mm) x 17"W (432mm) x 22"D (559mm)

Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: 72.5H (1842mm) x 21.5"W (54mm) x 23.4"D (594mm)

‐

: Back Filler Kit (P/N: SXR72BKFLR)

SXRS80SCATHTD

SXRS80SCATHTD includes:

Single-Wide Tall Stationary Shell with Slotted Inner Panels & Full-Height Pull­Down Locking Tambour Door

Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels
(1) Polymer Shelf
Outer & Inner Panels
Interior Dimensions
Overall Dimensions
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

SXRS80HCATHTD includes:

Single-Wide “Half-Depth”
Full-Height Pull-Down Locking Tambour Door

Half-Depth Catheter Slides, (15) Catheter Hooks & Labels
(1) Half-Depth Polymer Shelf
Outer & Inner Panels
Interior Dimensions
Overall Dimensions
Optional Recommended Accessory

Note: Only (1) Back Filler Kit required for multiple units abutting each other.

: MoldedHDPE(Hi‐DensityPolyethylene)
: 66”H (1677mm) x 17"W (432mm) x 23"D (584mm)
: 80”H (2032mm) x 21.5"W (54mm) x 24.4"D (620mm)

: MoldedHDPE(Hi‐DensityPolyethylene)
: 66”H (1677mm) x 17"W (432mm) x 15.5"D (394mm)
: 80”H (2032mm) x 21.5"W (54mm) x 18"D (457mm)

(Keylock\2 keys)

: Back Filler Kit (P/N: SXRBKFLR25TD)

Tall Stationary Shell with Slotted Polymer Inserts &

(Keylock\2 keys)

-

: Back Filler Kit (P/N: SXRBKFLR18TD)

SXRS80HCATHTD

6

SXRD72SCATH1

(1)

Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

(1)

() ( ) y

SXRD72SCATH2

Outer & Inner Panels

:

MoldedHDPE(Hi

DensityPolyethylene)

Preconfigured Ta llStationaryUnits

Catheter Storage

SXRD72SCATH1 includes:

Double-Wide Tall Stationary Shell with Slotted Polymer Inner Panels
Left Bay
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels
Left-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Right Bay

Catheter Hooks & Labels
Right-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Taupe Door Pulls
Outer & Inner Panels
Interior Bay Dimensions
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory : Back Filler Kit (P/N: SXR72BKFLR)
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 66”H (1677mm) x 17"W (432mm) x 22"D (559mm)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

SXRD72SCATH2 includes:

Double-Wide Tall Stationary Shell with Slotted Polymer Inner Panels
Left Bay
(2) Polymer Shelves (behind door)
Left-Hinged 225° Solid Non-Locking Upper Door
Mid-Level Drawertop Shelf

3” (76mm) Polymer Drawer
(2) 6” (152mm) Polymer Drawers
(2) 9” (229mm) Polymer Drawers
Right Bay
(1) Catheter Storage Module (Includes Catheter Shelf, (3) Catheter Slides, (15)

Catheter Hooks & Labels
Right-Hinged 225° Solid Locking Tall Door (Keylock/2 keys)
Taupe Drawer & Door Pulls

Interior Bay Dimensions: 66”H (1677mm) x 17"W (432mm) x 22"D (559mm)
Overall Dimensions
(without back filler kit); 24.8”D (630mm) (with optional back filler kit)
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: 72.5H (1842mm) x 41.3"W (1049mm) x 23.4"D (594mm)

‐

: Back Filler Kit (P/N: SXR72BKFLR)

7

SXRD80SCATHTD

(2) Half

Depth Polymer Shelves

Preconfigured Ta llStationaryUnits

Catheter Storage

SXRD80SCATHTD includes:

Double-Wide Tall Stationary Shell with Slotted Inner Panels & Full-Height Pull­Down Locking Tambour Door
(2) Catheter Storage Module (Includes (2) Catheter Shelves, (6) Catheter Slides,

(30) Catheter Hooks & Labels
(2) Polymer Shelves
Outer & Inner Panels
Interior Bay Dimensions
Overall Dimensions
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

: MoldedHDPE(Hi‐DensityPolyethylene)

: 80”H (2032mm) x 41.4"W (1052mm) x 24.4"D (620mm)

(Keylock\2 keys)

: 66”H (1677mm) x 17"W (432mm) x 23"D (584mm)

: Back Filler Kit (P/N: SXRBKFLR25TD)

SXRD80HCATHTD

SXRD80HCATHTD includes:

Single-Wide Half-Depth
Height Pull-Down Locking Tambour Door
(2) Half-Depth Catheter Storage Module (Includes (2) Half-Depth Catheter

Shelves, (6) Half-Depth Catheter Slides, (30) Catheter Hooks & Labels

­Outer & Inner Panels: MoldedHDPE(Hi‐DensityPolyethylene)
Interior Bay Dimensions
Overall Dimensions
Optional Recommended Accessory
(Note: Only (1) Back Filler Kit required for multiple units abutting each other.)

Tall Stationary Shell with Slotted Inner Panels & Full-

(Keylock\2 keys)

: 66”H (1677mm) x 17"W (432mm) x 15.5"D (394mm)

: 80”H (2032mm) x 41.4"W (1052mm) x 18"D (457mm)

: Back Filler Kit (P/N: SXRBKFLR18TD)

8

Preconfigured Tall Mobile Units

Standard Drawer Tote Specs

3” Drawer Tote

6” Drawer Tote

9” Drawer Tote

3” Drawer Tote

WeightCapacities:

3”Tote=25lbs.(11.3Kg)
6”&9”Totes=40lbs.(18.1Kg)

7

Preconfigured Tall Mobile Units

y

Metro Part #

HWDHWDLbs

Kg

p

pp

Heavy Duty Drawer Specs

Above:Double‐Wide3”HeavyDutyDrawer

Left:Single‐WideHeavyDutyDrawers

Inside Dimensions

Single-Wide HD Drawers

3" Heavy Du t y Dwr 2.3 16.3 19.2 58 414 487 100 45.4
6" Heavy Du t y Dwr 5.3 16.3 19.2 134 414 487 100 45.4
9" Heavy Du t y Dwr 8.3 16.3 19.2 210 414 487 100 45.4
12" Heav y Du ty Dwr 11.5 16.3 19.2 292 414 487 100 45.4

Doub le-Wide HD Drawers

3" Heavy Du t y Dwr 2.3 36.3 19.2 58 922 487 150 68
6" Heavy Du t y Dwr 5.3 36.3 19.2 134 922 487 150 68
9" Heavy Du t y Dwr 8.3 36.3 19.2 210 922 487 150 68
12" Heav y Du ty Dwr 11.5 36.3 19.2 292 922 487 150 68

Construction: The drawer interior is composed of 16 and 18 gauge solid

stainless steel. The drawer slides are full-extension, zinc-plated steel with
chrome-plated ball bearings, and attach to qwikSLOT inserts. They have side
lever releases and detents in the closed position. The slide travel distance is

20.75”. The drawer front surface is composed of molded ABS polymer, colored in
Metro Taupe. Snap-on handles (“pulls”) attach above the top recessed area and
are available in a variety of colors. Optional self-adhesive label holders

ositioned in the recessed area under the pulls are also offered.

Inches Millimeters

t Capacit

8