Metro SX240-243 Installation Manual

Peel Pouch Holder

INSTALLATION

INSTRUCTIONS

PART # SX240/243

Assembly consists of (1) SX240 or SX243 Peel Pouch Holder with attached mounting bracket.

1. Determine the desired mounting height for the peel pouch holder.

2. Align the two shoulder rivets on the back of the mounting bracket with the keyhole slots in the side pod

and push down, locking the bracket in place.

Note: Additional hardware supplied for alternate assembly.

MOUNTING DIRECTLY TO ACCESSORY SIDE POD

INST-SX240

Rev. 4/04

Peel Pouch Holder

INSTALLATION

INSTRUCTIONS

PART # SX240/243

Assembly consists of (1) SX240 or SX243 Peel Pouch Holder with attached mounting bracket, & (1)

Hardware Bag

Note: In order to use the Peel Pouch Holder, the Side Accessory Bracket Kit, part # SX205, must be
mounted to the cart.

1. Install the SX205 Side Accessory Brackets to the side of the cart per the assembly instructions provided
with the brackets. Note: recommended mounting locating dimensions for the brackets are provided,
however, the bracket mounting height may be adjusted to suit your needs.

2. Align the shoulder rivets on the back of the accessories with the keyhole slots located in the Side
Accessory Brackets and push down, locking the accessories in place on the Side Accessory Brackets.

Note: Additional hardware provided for alternate assembly.

MOUNTING WITH OPTIONAL ACCESSORIES TO
SIDE ACCESSORY BRACKETS

INST-SX240

Rev. 4/04