Metro RD33N User Manual
®
®
Item # ______________________________________________
METRO MOBILE
SIDE LOAD RACKS
Single Section/ModelRD Series
• Material: Special design, natural finish, high-
strength, extruded aluminum (6063-T6 alloy).
• Rugged: Double-riveted aircraft construction
throughout.
• Pass-Thru Design: Can be loaded on one side
and unloaded from the other for maximum
efficiency and convenience.
• Lightweight: Easy to handle. Freewheeling.
• Rapid Cooling
• Space Saving
• Sanitary: Easy to clean.
Job ________________________________________________
METRO MOBILE
Side Load Rackss RD Series
• Ideal for freezer operations, refrigerator use,
bakeries, commissaries.
RD33N
NSF
®
13.52
InterMetro Industries Corporation
®
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 2000 InterMetro Industries Corp.
Job ________________________________________________
®
METRO MOBILE
SIDE LOAD RACKS
®
13.52
Single Section/Model RD Series
Specifications
• Material: Special design,
natural finish, high-strength,
extruded aluminum
(6063-T6 alloy).
• Construction: Pass-thru
design, aircraft-riveted
construction throughout.
• Corner Posts: 1
1
/8" (38 x 38 x 3.1mm) angle-
shape.
• Top & Bottom: 1
1
/8" (38 x 38 x 3.1mm) angleshape riveted to four corner
posts.
1
/2" x 11/2" x
1
/2" x 11/2" x
• Casters: Two A5L on back–
5" (127mm) ball bearing
swivel, self-lubricating axle,
rubber-wheeled, zinc-plated,
bolted to full-length 14gauge channel to bottom
frame. Two A5LB on front–
same as above with wheel
brake.
1
• Slides: .060" x 1
/4" x 11/2"
bulb-tipped angle, doubleriveted to posts.
NOTE: Racks 60" and higher have two 1/2"
diameter stabilizer rods positioned at center.
METRO MOBILE
Side Load Racks Single Section/ModelRD Series
Dimensions
(a) (b) (c) (d) Approx
Model No. (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) no. size (in.) (lbs.) (kg)
RD33N 691/41759 293/8745 185/8470 601/21535 3 76 20 18 x 26 45 20
Height Width Depth Inside Height Slide Spacing Pan Capacity Pkd Wt.
Accessories
Model No.
A33RD Gray Continuous Bumper
A37 Gray Corner Bumpers
A71 Floor Lock with B5DN/B5DNB Casters Only
A120 Pan Stop
Manufactured by:
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Information and specifications are subject to change
without notice. Please confirm at time of order.
Printed in U.S.A.
L02-076
Rev. 2/00
Loading...