Metro RD15N User Manual

METRO® MOBILE

END LOAD RACKS

• Material: Special design, natural finish, high
strength, extruded aluminum (6063-T6 alloy).

• Rugged: Double-riveted aircraft construction
throughout.

• Pass-Thru Design: Can be loaded on one side
and unloaded from the other for maximum efficiency
and convenience.

• Lightweight: Easy to handle. Freewheeling.

• Sanitary: Easy cleaning.

• Rapid Cooling

Item # ______________________________________________

Item # ______________________________________________

Job ________________________________________________

Job ________________________________________________

End Load Racks Single Section

• Ideal for freezer operations, refrigerator use,
bakeries, commissaries.

Note: Wood grain vinyl aluminum enclosure panels are available.
Completely removable without tools. See accessories.

RD3N

/

Model — RD Series

InterMetro Industries Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

13.50

9.01

Job ________________________________________________Job ________________________________________________

METRO® MOBILE

13.50

Model — RD Series

/

END LOAD RACKS

Specifications

• Material: Special design, natural finish, high strength,
extruded aluminum (6063-T6 alloy).

• Construction: Pass-thru design, aircraft-riveted
construction throughout.

• Corner Posts: 11/2"x11/2"x1/8" (38x38x3.1mm) angle-shaped.

• Top & Bottom: 11/2"x11/2"x1/8" (38x38x3.1mm) angle-shaped

riveted to four corner posts.

• Casters: Two A5L – 5" (127mm) ball bearing swivel,
self-lubricating axle, rubber-wheeled, zinc-plated, bolted
to full-length,14-gauge channel bottom frame. Two A5LB –
same as above with wheel brake.

• Slides 3" (76mm) & 5" (127mm) Spacing: .060"x11/4"x11/2"
(1.5x32x38mm) bulb-tipped angle, double-riveted to posts.
RD15N and RD25N – .080"x11/4"x3" (2.0x32x76mm).

• Slides 11/2" (38mm) Spacing: .060"x1/2"x11/2"
(1.5x12.7x38mm) bulb-tipped, extruded channel double­riveted to posts.

Note: Racks 60" (1524mm) and higher have

stabilizer rods at center of each end.

LOAD RATINGS: 20 lbs. (9kg) per level, or not to exceed 375 lbs. (170kg) per unit.

1

/2" (12.7mm) diameter

End Load Racks Single Section

Dimensions

(a) (b) (c) (d) Shipping
Height/Width/Depth Inside Height Slide Spacing Pan Capacity Weight
Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) No. Size (in.) (lbs.) (kg)

RD3N 691/4x211/2x29 1759x545x735 601/2 1535 3 76 20 18x26 52 23
or 40 14x18 Pans

RD13N 691/4x211/4x261/2 1759x545x670 601/2 1535 11/2 38 40 18x26 Pans 52 23
RD15N 631/4x20x23 1606x510x585 541/2 1385 3 76 18 15x20 49 22

or 18 16x22 Trays
RD23N 691/4x211/2x29 1759x545x735 601/2 1535 5 127 12 18x26 45 20

or 24 14x18 Pans

Accessories

Model No. Description

A33RD Gray Continuous Bumper
A37 Gray Corner Bumper
A71 Floor Lock (for use with B5DN/B5DND casters only)
A120 Pan Stop

All Metro Catalog Sheets are available on our Web Site: www.metro.com

InterMetro Industries Corporation

North Washington Street, Wilkes-Barre, PA 18705
Phone: [phone]
Fax: [phone]

Printed in U.S.A. Rev. 6/10

Information and specifications are subject to change

without notice. Please confirm at time of order.

Copyright © 2010 InterMetro Industries Corp.

L02-075

For Product Information:
U.S. and Canada: 1.800.992.1776

Latin America: 1.561.333.3824
Europe: +31.76.587.7550

Asia/Pacific: +65.6567.8003
Middle East/Africa: +971.4.811.8286