Metro Polymer Caster User Manual

POLYMER CASTER

Assembly Instructions

1. Unpack carton and verify components shipped match components

ordered. (Donut bumpers are provided with each caster.)

2. Install Bumper on post.

—For MetroMax slide bumper over top of post.

3. Insert caster stem into post receptacle.

Cleaning Instructions

Use a mild solution of soap and warm water. Rinse thoroughly.

Lubrication

All Metro PC Series casters are pre-lubricated at the factory with a high
temperature, water resistant lubricant. For applications where frequent
cart washing is anticipated, a grease fitting for the swivel bearing is
available as an option. Frequency of lubrication will vary by use.

Note: For best results use a high temperature bearing grease with silicone.
Dow Corning #44 or equivalent is recommended.

InterMetro Industries
Corporation

North Washington Street
Wilkes-Barre, PA 18705
www.metro.com

Information and specifications are subject to change without notice.

Please confirm at time of order.

INST5PC

9/99