Page 1
ULA 14.4-18
ENG
567
4
3
2
1
Original instructions
.........................
4
Page 2
ENG
ENGLISH
Original instructions
1 General Safety Instructions
WARNING
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions.
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Always charge batteries in chargers recommended by the manufacturer.
for a specific type of battery may pose a fire hazard
when used together with other battery types.
Always insert the correct batteries in the battery
hand lamp.
ries and pose a fire hazard.
When not in use, keep batteries away from paper
clips, coins, keys, nails, screws or other small
metal objects that could bridge the contacts.
Short circuits between battery contacts can cause
burns or fires.
Fluid may escape if batteries are used inappropriately. Avoid all contact with this fluid. In the
event of accidental skin contact, rinse the
affected area thoroughly. If the fluid enters your
eyes, seek immediate medical assistance.
Escaping battery fluid can cause skin irritation or
burns.
Do not operate the battery hand lamp in potentially explosive environments where flammable
dust, fluids or gases are located.
generate sparks which may ignite dust or vapours.
Avoid accidental operation. Make sure that the
battery hand lamp is switched off before
connecting the battery and picking up or
carrying the lamp.
switch on the device or connecting the device to the
power supply when already switched on can lead to
accidents.
Always switch off the battery hand lamp when
not in use.
Never use electrical devices with a defective
switch.
Electrical devices that can no longer be
switched on or off are dangerous and must be
repaired immediately.
Remove the battery before adjusting, cleaning
and storing the device or changing accessories.
These precautionary measures prevent accidental
operation of the battery hand lamp.
When not in use, keep the battery hand lamp out
of the reach of children. Do not allow personnel
to use the device unless they are already familiar
4
– Reading the operating
Failure to follow all safety warn-
Chargers designed
Using other batteries may cause inju-
The lamp can
Accidentally pressing the
with it or have read these instructions.
devices are dangerous when used by inexperienced
personnel.
Maintain the device carefully. Check that all
moving parts are functioning correctly and do
not seize, make sure that no parts are broken or
damaged to an extent where they affect the
function of the battery hand lamp. Have
damaged parts repaired before using the device.
Many accidents are caused by poorly maintained
electrical tools.
Use the battery hand lamp, accessories, etc. as
described in these instructions. Take into
consideration the working conditions and tasks
required.
other than those intended can lead to dangerous
situations.
Always have your battery hand lamp repaired by
qualified personnel using genuine spare parts.
This will ensure that the device functions safely.
Keep your battery hand lamp away from heat
sources and fires. Do not store your battery
hand lamp in moist or wet ambient conditions.
Do not store in locations where temperatures
may reach or exceed 40 °C.
alcoves, motor vehicles or metal structures during
the summer.
Do not clean with aggressive cleaning agents.
Do not leave the battery hand lamp switched on
unattended.
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
out and comes into contact with your eyes, wash
them with clean water and seek medical attention
immediately.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!
Using electrical devices for applications
Examples include
Protect battery packs from water and
moisture!
Do not expose battery packs to naked
flame!
Slightly acidic, flammable fluid may leak
from defective Li-ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks
Warning - general danger!
Electrical
Page 3
2Overview
See image on the title page.
1 Battery pack
2 Battery pack release button
3 Switch (on/off)
4Window
5 Locking ring
6 Adjusting ring
7 Lamp head
3Use
Insert a fully charged battery pack (1) (not included
in the scope of delivery). Turn on and off at the
switch (3). Tilt the lamp head (7) to adjust the angle
of the light beam. Adjust the light beam by turning
the adjusting ring (6). Do not direct the light beam
into the eyes of people or animals.
Caution! The window (4) may become very
hot. Risk of burning! Do not touch!
4 Maintenance / Changing
the bulb
Caution! Window (4), light bulb and reflector can
become very hot. Risk of burning! Allow to cool
before dismantling.
Press the battery pack release (2) button and
remove the battery pack (1). Hold the adjusting
ring (6) and unscrew the locking ring (5). Remove
the reflector. Turn the bulb until the notch on the
metal collar lines up with the retaining lobe on the
bulb socket. Remove the bulb from the socket.
Insert new bulb (in order to not shorten the service
life of the bulb, do not touch the bulb with your
bare hands.) Reassemble.
ENGLISH
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.
ENG
7 Technical Specifications
Voltage range:
Bulb order no.:
For use with Metabo battery packs:
6.25469, 6.25457, 6.25459, 6.25467, 6.25456,
6.25458.
Postfach 1229, 72602 Nürtingen, Germany
Changes due to technological progress reserved.
14.4 - 18 V
343 074 560
(5.2 V, 0.85 A, base P13.5s)
Metabowerke GmbH
www.metabo.com
© by Metabo
6.25468,
5Repairs
Repairs to Metabo machines must be carried
out by qualified electricians only!
Metabo machines requiring repairs can be sent to
the address specified on the spare-parts list.
Please enclose a description of the fault with the
device.
6 Environmental Protection
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!
5
Page 4
Page 5
Page 6
Metabowerke GmbH,
72622 Nürtingen, Germany
www.metabo.com
Loading...