Page 1
MOBILE AND STURDY.
Crosscut, Mitre and Table saws from Metabo offer the
user the benefit of having three machines in one. The
KGT 300 allows the user to crosscut timbers to length
at 90° up to 120 mm in depth, then mitre all the way to
45° and cut up to 66 mm in depth. In table saw mode
the machine is ideally suited to ripping panels up to
Particularly large
saw blade (315 mm),
ideal for processing panels,
laminates and high timbers up to
120 mm depth. 48 tooth blade.
CROSSCUT, MITRE AND TABLE SAWS
55 mm in depth, e.g. when cutting panels to size for
laminate flooring. The KGT 501 is a larger version of this
machine with a maintenance free induction motor, ideal
for large timbers and on site use. Professional, precise
and robust. Metabo – the professionals brand.
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
e.g. KGT 300
Infinitely variable turntable
adjustment
mitre from 50° to the left to 60°
to the right.
Light and sturdy
Low weight due to
aluminium die cast
construction. For easy
transportation.
Quick adjustment
of the table height
Saw table
with large support
surface and sturdy
parallel fence.
Powerful 1.8 kW
universal motor
Soft start and stops
in 5.5 seconds.
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
315 mm saw blade
Housing and holder allow the use
of a 315 mm blade. This enables
the clean cutting of timbres up to
a height of 120 mm.
Saw head can be tilted
Bevel up to 48° left and 45° right.
Due to the special position of the
motor, ideal cutting heights are
possible, both for cross-cutting and
table saw operation. The motor is no
longer in the way.
| 247
WELDING
COMPRESSED
TECHNOLOGY
AIR SYSTEMS
Page 2
CROSSCUT, MITRE AND TABLE SAWS
EQUIPMENT FEATURES EQUIPMENT FEATURES
Changeover from crosscut to table operation
in split seconds
Powerful universal motor , stops in 5.5 seconds
Low own weight for easy transport
Double mitre cuts up to 45° due to inclinable saw
head and integrated round table
Saw head can be beveled on both sides
Sturdy and precise aluminium cast construction
Integrated holder grooves for attaching table
length extension without tools
Sturdy parallel guide/ripping fence
Combined mounting saws with three functions: Crosscut saw,
mitre saw and table saw
Changeover from crosscut to table operation in split seconds
Best cutting quality due to the torsion-free design
Absolutely collision-free work with every angle setting
Induction motor – quiet and maintenance-free , stops in 5.5 seconds
Electronic motor brake
Scale for infinitely variable angle adjustment and fine-adjustable
snap-lock at 90° and 45°
Sturdy and precise aluminium cast construction
Stand fixed to the machine: foldable legs for problem-free
work on the ground
Sturdy parallel guide/ripping fence
KGT 300 KGT 501
Crosscut,
Mitre and Table Saw
KGT 300
Comparative
device characteristics
Dimensions L x W x H 575 x 760 x 730 mm
Working height without stand 420 mm
Table size 345 x 473 mm
Cutting width - cross cutting
170 mm/112 mm
mode 90/45°
Cutting depth - cross cutting
100 mm/66 mm
mode 90/45°
Cutting height – table
55 mm
mode 90°
No load speed 3.400 /min
Cutting speed (maximum) 56 m/s
Saw blade Ø 315 x 30 mm
Adjustment options
- Turntable left (maximum) 50 °
- Turntable right (maximum) 60 °
Rated input power 1,8 kW
Output power 1 kW
Motor protection Circuit breaker
Weight 21 kg
Standard equipment Carbide saw blade
(48 teeth), chip hood,
parallel guide/ripping
fence, tool for saw blade
change
Crosscut,
Mitre and Table Saw
KGT 501
Comparative
device characteristics
Dimensions L x W x H 620 x 663 x 878 mm
Working height without stand 457 mm
Table size 500 x 520 mm
Cutting width - cross cutting
210 mm/154 mm
mode 90/45°
Cutting depth - cross cutting
60 mm/45 mm
mode 90/45°
Cutting height – table
81 mm
mode 90°
No load speed 3.620 /min
Cutting speed (maximum) 42 m/s
Saw blade Ø 250 x 30 mm
Adjustment options
- Turntable left (maximum) 45 °
- Turntable right (maximum) 45 °
Rated input power 2 kW
Output power 1,5 kW
Motor protection Circuit breaker
Weight (including stand) 45 kg
Standard equipment Carbide saw blade (34 teeth),
chip hood, parallel guide/ripping
fence, foldable stand, tool for
saw blade change
Type KGT 300
Order no. 0103300000
0103300039
248 |
GB
110 V
Order no. 0102505018
0102505042
0102505034
GB
230 V
GB
110 V
Type KGT 501
Page 3
CROSSCUT, MITRE AND TABLE SAWS
Machine stand
Universal machine stand
For ideal working
height and secure
base
Can also be used
on uneven surfaces
Collapsible,
with height
compensation
Suitable for: KS 210 C,
KGS 255, KGS 301,
KGS 303, KGS 305,
KGS 331, KGT 300
Machine stand KSU 400
Machine stand
and table extension
in one sturdy
construction
Universal end
profile makes
it suitable for all the
NEW
conventional crosscut
saws of well-known
manufacturers
Sturdy legs with
height adjustment
Extensive range
of accessories
Max. total length 400 cm
Max. weight load in central
part 250 kg
Weight: 25 kg
For accessories for the
machine stand KSU 400,
see page 243
Work clamps
Work clamp
For the secure clamping
of smaller workpieces, plastic
or aluminium profiles
Suitable for: KGS 255, KGS 303,
KGS 305, KGT 300, KGT 501,
KS 210 C, KS 210 Lasercut
KGT 501 from model year 2003 on
ACCESSORIES FOR KGT 300
Table length extensions
Table length extension
right, steel
For the secure
supporting of long
workpieces
With length guide and
scale, up to 1,600 mm
Dimension slide for
repeating accuracy
Length: 1.140 mm
Width: 200 mm
Table length extension left,
steel
For the secure supporting
of long workpieces
With length guide and
scale, up to 1,600 mm
Dimension slide for
repeating accuracy
Length: 1.000 mm
Width: 200 mm
Order no.
0910057529
0910066110
Order no.
0910057553
Order no.
0910058886
0910058827
Supplementary stops
Suction adapter
44 mm
diameter-Ø
35 mm
bore-Ø
,
,
Table length extension
right, steel
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Length: 1.140 mm
Width: 200 mm
Table length extension left,
steel
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Length: 1.000 mm
Width: 200 mm
Table length extension
right, aluminium
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Length: 1.130 mm
Width: 200 mm
Table length extension left,
aluminium
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 3,000 mm
Dimension slide for
repeating accuracy
Foldable and height-
adjustable support leg
Length: 1.000 mm
Width: 200 mm
Supplementary stop
For the safe and tear-free
processing of small workpieces
and strips
Also particularly suitable
for tall workpieces
Suitable for: KGS 255,
KGS 303, KGT 300
suction adapter
Suitable for: KGS 255, KGS 301,
KGS 303, KGS 305, KGT 300
Order no.
0910058894
0910058835
0910057545
0910057537
Order no.
0910059831
Order no.
0910059955
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
AIR SYSTEMS
COMPRESSED
| 249
Page 4
CROSSCUT, MITRE AND TABLE SAWS
ACCESSORIES FOR KGT 501
Table length extensions
Table length extension
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 2,800 mm
With extension profile
and 2 dimension slides
for repeating accuracy
Can be used left
and right for cutting
to length
Length: 1.000 mm
Width: 200 mm
Sliding table
Sliding table
Enables exact cuts,
even on larger workpieces
Sliding table on ball bearings
Cross-cut guide for cutting
to length up to 1,000 mm,
with dimension slide,
magnifier and adjustable
aluminium scale
Easy to mount and dismount
Cutting width 90°/45°: 650 mm/890 mm
Table size: 350 x 290 mm
Overall length: 1.170 mm
Base weight: 23 kg
Guide length extension
for sliding tables
For use in the cross-cut guide
of the sliding table
Enables the cutting
to length of workpieces
of up to 2,000 mm
Adjustable scale made
of aluminium
Mitre guides
Mitre guide
For precise cross cuts
and angular cuts
With workpiece bearing
made of aluminium
Infinitely variable, both sides
adjustable, 90°-45°
Suitable for: KGT 500, KGT 501
Positioning laser
Positioning laser
For a perfect preview
of the sawing cut
The workpiece can
be positioned quickly
and securely for cutting
No more test cuts
Battery-powered line laser
Suitable for: KGS 301, KGS 331,
KGT 500, KGT 501
Order no.
0910053213
Order no.
0910053205
0910055100
Order no.
0910009028
Order no.
0910040553
Chip and dust extraction units
Chip and dust extraction unit
For a cleaner work environment
and an unobstructed view of the
workpiece you want to cut
For connection to a chip and dust
extraction unit
Extraction nozzle Ø: 100 mm
Suitable for: KGT 500, KGT 501
Roller stands
For supporting long workpieces when sawing,
moulding/routing, planing and drilling
Sturdy, height-adjustable and foldable
Roller stand RS 420
Width: 400 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 G
Width: 520 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 W
Width: 420 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Circular saw blades
Top cutting results thanks to teeth ground on all sides
and high accuracy of flatness and concentric running
Tungsten carbide blades: long tool life
thanks to use of unmixed carbide
Can be reground repeatedly
Material DimensionsmmTooth
Made in Germany
Version Order no.
pitch
For KGT 501
Tungsten
carbide
250 x 2,8 x 30 34
Alternately bevelground tips, Combo
secondary hole holder
Tungsten
carbide
250 x 2,8 x 30 42
Alternately bevelground tips, Combo
secondary hole holder
Tungsten
carbide
250 x 2,8 x 30 80
Alternately bevelground tips, Combo
secondary hole holder
Tungsten
carbide
250 x 2,8 x 30 80
Flat tooth/
trapezoidal tooth,
5° neg.
For KGT 300
Tungsten
carbide
315 x 2,8 x 30 20
Flat tooth,
Combo secondary
hole holder
Tungsten
carbide
Tungsten
carbide
Tungsten
carbide
315 x 2,8 x 30 48
315 x 2,8 x 30 84
315 x 2,8 x 30 96
Alternately bevelground tips, 0°
Alternately
bevelground tips
Flat tooth/
trapezoidal tooth,
5° neg.
Order no.
0910009249
Order no.
0910053353
0910053345
0910053361
6.28045
6.28046
6.28087
6.28088
6.28015
6.28057
6.28058
6.28092
250 |
Page 5
NO TEARS – NO EFFORT.
The basic principle is “pulling instead of pushing”. Tho-
se who have had to cut long, difficult or particularly
hard workpieces know that pulling is easier and clea-
ner than pushing. Considerably less teeth cut through
FLUSH-MOUNTED CIRCULAR SAWS
the wood, the cut can be controlled better and there are
less tears. At the same time, the flush-mounted circular
saw principle protects the saw blades, thus increasing
their service life significantly.
SAWS
e.g. UK 333
333 mm pulling length
All normal laminated
floors and panels can
be cut in two completely
by up to 45°.
Sturdy and firm
side parts made
of solid steel sheet.
Precise workpiece
support
Table-top made of
aluminium profiles.
High quality
universal fence
for angle settings
from –90° to +90°.
Absolutely flexible
Powerful universal
motor and speed
regulation by Metabo
VC electronics for
constant speed under
moderate loading.
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
Practical accessories
For example, table length
extension or sliding carriage
– easy to mount.
Quick conversion
The UK 333 can be converted to
a table saw. The universal fence
becomes a parallel stop for cutting
long workpieces.
Integrated, folding
stand with level com-
pensation for a firm base.
The machine can also be
operated when folded.
Always mobile
The stand can be folded in easily.
The UK 333 is therefore easy to
transport and fits in every car.
Always firm
Versatile cuts
The universal fence can be rotated by
180° for mitre and double-mitre cuts.
The saw blade can be inclined from
–1.5° to 46.5°; ideal for undercutting.
WOOD-PROCESSING
WATER-/PUMP
WELDING
COMPRESSED
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
AIR SYSTEMS
| 251
Page 6
FLUSH-MOUNTED CIRCULAR SAWS
COMMON FEATURES
The first mobile professional saw with the functions and
advantages of a crosscut and mitre saw, a flush-mounted
circular saw and a table saw
Three machines in one – mitre saw, flush-mounted
logging saw and table saw
Available as a complete set for performing a wide range
of work to a high quality
Quick assembly of the delivered accessories
Mobile due to low weight
Motor with overload protection and soft start technology
Reversible from mitre saw to table saw function in seconds
High quality, swivelling universal guide adjustable on all sides
of the machine table for mitre and parallel cutting
Infinitely swivel and height adjustable saw blade
Integrated, foldable stand with level adjustment for safety
Precise workpiece support made of aluminium profiles
Side part made of solid steel sheet
For single phase alternating current
UK 290
NEW
Flush-mounted circular saw
UK 290
UK 290 Set
NEW
Flush-mounted circular saw
UK 290 Set
Special advantages
Upgradable to a system circular saw
Sliding table, table width and length
extension for precise sawing of large
work pieces
Comparative device characteristics
Dimensions L x W x H 674 x 478 x 878 mm 1.600 x 1.180 x 878 mm
Working height without stand 420 mm 420 mm
Table size 478 x 674 mm 478 x 674 mm
Cutting height 90/45° 60 mm/42 mm 60 mm/42 mm
No load speed 4.500 /min 4.500 /min
Rated load speed 3.800 /min 3.800 /min
Saw blade Ø 220 x 30 mm Ø 220 x 30 mm
Inclination range -1,5 - 46,5 ° -1,5 - 46,5 °
Cutting speed (maximum) 44 m/s 44 m/s
Chain length 290 mm 290 mm
Rated input power 1,8 kW 1,8 kW
Output power 1,2 kW 1,2 kW
Weight (including stand) 25 kg 52 kg
Standard equipment Carbide saw blade with alternately
bevel-ground tooth (36 teeth), foldable stand,
universal guide, splitting wedge, push stick,
chip extraction connections
Carbide saw blade with alternately
bevel-ground tooth (36 teeth), foldable stand,
universal guide, fence profile 700 mm,
splitting wedge, push stick, chip and dust
extraction unit, table length extension,
parallel guide/ripping fence, table length
extension, sliding table
Type UK 290 UK 290 Set
Order no. 0102900000 0192901000
252 |
Page 7
COMMON FEATURES
The first mobile professional saw with the functions
and advantages of a crosscut and mitre saw,
a flush-mounted circular saw and a table saw
Available as a complete set for performing a wide
range of work to a high quality
Quick assembly of the delivered accessories
Mobile due to low weight
Powerful universal motor and speed regulation
with Metabo VC electronics
Motor with overload protection and soft start technology
Reversible from mitre saw to table saw function in seconds
FLUSH-MOUNTED CIRCULAR SAWS
High quality, swivelling universal guide adjustable on all
sides of the machine table for mitre and parallel cutting
Infinitely swivel and height adjustable saw blade
Integrated, foldable stand with level adjustment for safety
Flush-mounted light running slides made of aluminium
die cast with 8 ball bearings for maximum precision
Precise workpiece support made of aluminium profiles
Side part made of solid steel sheet
For single phase alternating current
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
UK 333
Flush-mounted circular saw
UK 333
UK 333 Set
Flush-mounted circular saw
UK 333 Set
Special advantages
Sliding table, table width and length
extension for precise sawing of large
work pieces
Comparative device characteristics
Dimensions L x W x H 760 x 585 x 900 mm 1.600 x 1.287 x 900 mm
Working height without stand 418 mm 418 mm
Table size 585 x 750 mm 585 x 750 mm
Cutting height 90/45° 70 mm/49 mm 70 mm/49 mm
No load speed 1.800 - 4.500 /min 1.800 - 4.500 /min
Rated load speed 4.500 /min 4.500 /min
Saw blade Ø 220 x 30 mm Ø 220 x 30 mm
Inclination range -1,5 - 46,5 ° -1,5 - 46,5 °
Cutting speed (maximum) 52 m/s 52 m/s
Chain length 333 mm 333 mm
Rated input power 2,2 kW 2,2 kW
Output power 1,5 kW 1,5 kW
Weight (including stand) 35,9 kg 63 kg
Standard equipment Carbide saw blade with alternately
bevel-ground tooth (36 teeth), foldable stand,
universal guide, splitting wedge,
cutting height indicator, push stick,
chip extraction connections
Carbide saw blade with alternately
bevel-ground tooth (36 teeth), foldable stand,
universal guide, fence profile 700 mm,
splitting wedge, cutting height indicator,
push stick, chip and dust extraction unit,
table length extension, parallel guide/ripping
fence, table length extension, sliding table
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
Type UK 333 UK 333 Set
Order no. 0103330000 0193330000
| 253
COMPRESSED
AIR SYSTEMS
Page 8
FLUSH-MOUNTED CIRCULAR SAWS
EQUIPMENT FEATURES
The first mobile professional saw with the functions and
advantages of a crosscut and mitre saw, a flush-mounted
circular saw and a table saw
Extremely stable, light and mobile due to the magnesium
machine table
Mobile due to low weight
Motor with overload protection and soft start technology
Reversible from mitre saw to table saw function in seconds
Saw table rotatable by 180°, unique worldwide: reduced space
requirement for various applications and enables sawing on
smallest space
High quality, swivelling universal guide adjustable on all
sides of the machine table for mitre and parallel cutting
Infinitely swivel and height adjustable saw blade
Integrated, foldable stand with level adjustment for safety
Flush-mounted light running slides made of aluminium die cast
with 8 ball bearings for maximum precision
For single phase alternating current
ACCESSORIES FOR UK 290 AND UK 333
Work benches
Order no.
0910064304
GB
NEW
Flexo 500 universal table
For the stationary
use of Metabo jig
saws, routers and
circular saws (when
using appropriate
accessories)
With foldable
stand and height
adjustment
Also usable as
a table extension
or work station in
combination with
the UK 290 or UK 333
Sturdy steel construction
and a large table top
made from continuous
strand casting
Secanta
Flush-mounted circular saw
Secanta
Comparative device characteristics
Dimensions L x W x H 730 x 750 x 910 mm
Working height without stand 330 mm
Table size 750 x 730 mm
Cutting height 90/45° 70 mm/49 mm
Turntable diameter 650 mm
No load speed
Rated load speed 4.500 /min
Saw blade Ø 220 x 30 mm
Inclination range -2 - 47 °
Cutting speed (maximum) 52 m/s
Chain length 285 mm
Rated input power 1,8 kW
Output power 1,1 kW
Weight 28 kg
Weight (including stand) 32 kg
Standard equipment Carbide saw blade with
alternately bevel-ground tooth
(36 teeth), foldable stand,
universal guide, splitting wedge,
cutting height indicator,
push stick, chip extraction
connections, chip and dust
extraction unit
Type Secanta
Order no. 0102207009
Wheel Sets
Wheel set
Easy and convenient
to transport
NEW
Sliding table
Sliding table
Large and wide
work pieces can
be easily guided
through the
NEW
saw blade
Clean and precise
cutting results
Easy to mount and
dismount
Safe working conditions
Table size: 310 x 200 mm
Overall length: 1.225 mm
Base weight: 7,7 kg
1)
standard equipment with UK 290 set and UK 333 set
Order no.
0910064363
Order no.
0910064347
1)
1)
254 |
Page 9
FLUSH-MOUNTED CIRCULAR SAWS
Table width extensions
Table width extension
NEW
Increases the
supporting surface;
ideal for large boards
Enables cuts with
parallel guide of
up to 610 mm
Height adjustable
Length: 674 mm
Width: 501 mm
Table length extensions
Table length extension
NEW
Practical cutting
lengths for longer
work pieces
Safe working
conditions
Length: 380 mm
Width: 476 mm
Parallel stops
Parallel guide/
NEW
ripping fence
For long cuts or for
cutting large boards
Long attachment
profile for guiding the
work piece safely
1)
standard equipment with UK 290 set and UK 333 set
Universal guides
Universal guide
Can be used as a
spare or as a second
mitre guide
For mitre cuts and
double mitre cuts
Can be turned 180°
(2 x 90°)
Stop slide length: 450 mm
Suitable for: UK 333
Splinter protection
Splinter protection
(set=10 units)
Is used in front
of the saw blade and
minimises tears on
the recess side of the
workpiece
Suitable for: UK 333
Order no.
0910064401
Order no.
0910064312
Order no.
0910063707
Order no.
0910063057
Order no.
0910062107
Chip and dust extraction units
1)
1)
standard equipment with UK 290 set and UK 333 set
NEW
Work clamps
1)
NEW
1)
NEW
Saw blade depot
NEW
Chip and dust
extraction unit
Extraction at two
points: at chip box
and at the top on
the guard
Clear view of the
work piece
Cleaner working
environment
Extraction nozzle Ø: 100 mm
Work clamp
For the secure
clamping of smaller
workpieces,
round stock,
plastic or
aluminium profiles
Suitable for using
with universal guide
Max. clamping
height 75 mm
Work clamp
For the secure
clamping of smaller
workpieces,
round stock,
plastic or
aluminium profiles
Suitable for use
on the universal
guide and
sliding table
Also suitable for
the table length
extensions
Max. clamping
height 55 mm
Suitable for: UK 220,
UK 333
Work clamp
UK 290/UK 333
For clamping
work pieces on to
the sliding table
Saw blade depot
Saw blade depot
with measuring
tape, angle bevel
and pencil
To safely store
a maximum
of two circular
saw blades
up to Ø 254 mm
(Saw blades not
included)
Suitable for attaching
the Flexo 500 universal
table, the stands for
the UK 290, UK 333 flushmounted circular saws
Crosscut, mitre and table
saws.
Order no.
0910064371
Order no.
0910064495
0910053124
0910064509
Order no.
0910064339
1)
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
AIR SYSTEMS
COMPRESSED
| 255
Page 10
FLUSH-MOUNTED CIRCULAR SAWS
ACCESSORIES FOR UK 333 AND SECANTA
Sliding table
Sliding table
Enables exact cuts,
even on larger
workpieces
Sliding table on
ball bearings
Cross-cut guide
for cutting to length
up to 1,000 mm,
with dimension slide,
magnifier and
adjustable
aluminium scale
Easy to mount and
dismount
Cutting width 90°/45°:
650 mm/890 mm
Table size: 350 x 290 mm
Overall length: 1.170 mm
Base weight: 23 kg
Guide length extensions
Guide length
extension
for sliding tables
For use in the
cross-cut guide
of the sliding table
Enables the
cutting to length
of workpieces of
up to 2,000 mm
Adjustable scale
made of aluminium
Table length extensions
Table length
extension
For the secure
supporting of long
workpieces
With length guide
and scale, extractable
up to 2,800 mm
With extension
profile and
2 dimension slides for
repeating accuracy
Can be used left and
right for cutting to
length
Foldable and heightadjustable support leg
Length: 1.000 mm
Width: 200 mm
Order no.
0910053205
Order no.
0910055100
Order no.
0910053213
Universal guides
Universal guide
Can be used as
a spare or as
a second mitre
guide
For mitre cuts and
double mitre cuts
Can be turned 180°
(2 x 90°)
Stop slide
length: 500 mm
Suitable for:
Secanta
Push block
Push block
For the lateral
guiding of the
workpiece
Spray for maintenance and care
Spray for maintenance and care
Ideal for maintenance
and care of wood
processing machines
Contains silicon, prevents
saw dust from sticking,
e.g. to threaded rods or
sliding bearings
Increases the sliding quality
of the workpieces on the
machine table
High cleaning capacity
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
pitch
For UK 290, UK 333, Secanta
Tungsten
220 x 2,6 x 30 36 Alternately
carbide
Tungsten
220 x 2,6 x 30 48 Roof hollow
carbide
Tungsten
220 x 2,6 x 30 80 Flat tooth/
carbide
Order no.
0910053574
Order no.
0910057200
Order no.
0911018691
Version Order no.
6.28042
bevel-ground
tips
6.28043
tooth
6.28084
trapezoidal
tooth
256 |
Page 11
COMMON FEATURES
Demountable for large range of use
For mobile use
Inclinable saw blade
Lockable switch protects from unauthorised use
Large surface, anodised tables made of aluminium
extruded sections
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
PRECISION CIRCULAR SAWS
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
PK 200 PK 255 - 3,4 DNPK 255 - 2,5 WN
Precision circular saw
PK 200
Precision circular saw
PK 255 - 2.5 WN
Precision circular saw
PK 255 - 3.4 DN
Special advantages
Powerful universal motor
Table length extension and stand
included in the scope of delivery
For single phase alternating
TECHNOLOGY
WOOD-PROCESSING
current
For three phase current
Comparative device characteristics
Dimensions L x W x H 540 x 430 x 330 mm 1.380 x 780 x 1.000 mm 1.380 x 780 x 1.000 mm
Table size 430 x 540 mm 660 x 760 mm 660 x 760 mm
Cutting height 90/45° 65 mm/45 mm 80 mm/53 mm 80 mm/53 mm
Rated load speed 4.000 /min 3.800 /min 3.800 /min
Cutting speed 44 m/s 50 m/s 50 m/s
TECHNOLOGY
WATER-/PUMP
Maximum cutting width
- With parallel guide/ripping fence 180 mm 300 mm 300 mm
Saw blade Ø 210 x 30 mm Ø 250 x 30 mm Ø 250 x 30 mm
Saw blade swivel range -1,5 - 46,5 ° 0 - 45 ° 0 - 45 °
Rated input power 1,7 kW 2,5 kW 3,4 kW
Output power 1 kW 1,9 kW 2,5 kW
Weight 21 kg 71 kg 71 kg
Standard equipment Carbide circular saw blade
(alternately bevel-ground tooth,
30 teeth), parallel guide/ripping
fence, mitre guide, chip extraction
connections, push stick
Carbide circular saw blade
(alternately bevel-ground tooth,
34 teeth), stand, parallel guide/
ripping fence, mitre guide,
table length extension, chip
extraction connections, push stick
Carbide circular saw blade
(alternately bevel-ground tooth,
34 teeth), stand, parallel guide/
ripping fence, mitre guide, table
length extension, chip extraction
connections, push stick
WELDING
TECHNOLOGY
Type PK 200 PK 255 - 2.5 WN PK 255 - 3.4 DN
Order no. 0102001001 0102582209 0102582802
0102001010
GB
230 V
| 257
COMPRESSED
AIR SYSTEMS
Page 12
PRECISION CIRCULAR SAWS
COMMON FEATURES
Demountable for large range of use
For mobile use
Powerful universal motor
Table length extension and stand included
in the scope of delivery
Inclinable saw blade
... with base support system,
sliding table and table width
extension
Lockable switch protects from unauthorised use
Large surface, anodised tables made of aluminium
extruded sections
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
PK 255 - 3,4 DNPK 255 - 2,5 WN
System circular saw
PK 255 - 2.5 WN
System circular saw
PK 255 - 3.4 DN
Special advantages
For single phase alternating current
For three phase current
Comparative device characteristics
Dimensions L x W x H 1.560 x 1.400 x 1.000 mm 1.560 x 1.400 x 1.000 mm
Table size 660 x 760 mm 660 x 760 mm
Cutting height 90/45° 80 mm/53 mm 80 mm/53 mm
Rated load speed 3.800 /min 3.800 /min
Cutting speed 50 m/s 50 m/s
Maximum cutting width
- With parallel guide/ripping fence 300 mm 300 mm
Saw blade Ø 250 x 30 mm Ø 250 x 30 mm
Saw blade swivel range 0 - 45 ° 0 - 45 °
Rated input power 2,5 kW 3,4 kW
Output power 1,9 kW 2,5 kW
Weight 74 kg 74 kg
Standard equipment Carbide circular saw blade (alternately bevel-
ground tooth, 34 teeth), stand, basic support
system (cutting width up to 700 mm), sliding
table for basic support system, sliding table
with support base, parallel guide/ripping
fence, mitre guide, table length extension,
chip extraction connections, push stick
Carbide circular saw blade (alternately bevel-
ground tooth, 34 teeth), stand, basic support
system (cutting width up to 700 mm), sliding
table for basic support system, sliding table
with support base, parallel guide/ripping
fence, mitre guide, table length extension,
chip extraction connections, push stick
Typ PK 255 - 2,5 WN PK 255 - 3,4 DN
Bestell-Nr. 0192552508 0192553407
GB GB
258 |
Page 13
PRECISION CIRCULAR SAWS
ACCESSORIES FOR PK 200 AND PK 255
Machine stand
Machine stand
For ideal working
height and
secure base
Easy to transport
Collapsible
Suitable for: PK 200
Wheel Sets
Wheel set
For easy transportation
For assembly on the
machine stand
Suitable for: PK 255
Base support system
Base support system
Necessary for the
mounting of sliding
tables, table length
extensions and table
width extensions
Fastening / locking
at the front and
rear side of the
machine housing
Length: 1,180 mm
Suitable for: PK 200
Base support system
Necessary for the
mounting of sliding
tables, table length
extensions and table
width extensions
Fastening / locking
at the front and
rear side of the
machine housing
Length: 1,180 mm
Suitable for: PK 255
Accessories for the basic support system
Extension
Lengthens the
base support system
by 720 mm
Allows you to make
broader cuts at the
length guide of
up to 1,400 mm
Delivery includes
height-adjustable
support leg
Support base
Additional support
leg for better support
of the base support
extension
Height adjustable
Order no.
0910017047
Order no.
0910003313
Order no.
0910018450
0910052411
Order no.
0910050028
0910050036
Sliding table
Enables exact cuts,
even on larger
workpieces
Left/right mounting
on the base support
system
Distance to the saw
blade can be adjusted
individually
Eccentric clamp - easy to
mount and remove
Cross-cut guide, length
700 mm, can be swivelled
by 47° in either direction
Suitable for: PK 200
Cutting width 90°/45°:
660 mm/910 mm
Table size: 540 x 240 mm
Overall length: 1.180 mm
Sliding table
Enables exact cuts,
even on larger
workpieces
Left/right mounting
on the base support
system
Distance to the saw
blade can be adjusted
individually
Eccentric clamp - easy to
mount and dismount
Cross-cut guide, length
700 mm, can be swivelled
by 47° on both sides
Suitable for: PK 255
Cutting width 90°/45°:
900 mm/1.140 mm
Table size: 540 x 240 mm
Overall length: 1.550 mm
Table width extension
The table width
extension increases
the supporting surface;
ideal for cutting boards
Enables cuts on
length guide
up to 700 mm width
When using a base
support extension,
cuts on the length
guide of up to
1,400 mm wide
are possible
Left/right mounting
on the base support
system
Suitable for: PK 200
Length: 585 mm
Width: 200 mm
Table width extension Plus
The table width
extension increases
the supporting surface;
ideal for cutting boards
Enables cuts on
length guide
up to 700 mm width
When using a base
support extension,
cuts on the length
guide of up to
1,400 mm wide
are possible
Left/right mounting
on the base support
system
Suitable for: PK 255
Length: 835 mm
Width: 200 mm
Order no.
0910018434
0910052420
0910018442
0910064517
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
TECHNOLOGY
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
WELDING
TECHNOLOGY
AIR SYSTEMS
COMPRESSED
| 259
Page 14
PRECISION CIRCULAR SAWS
Other accessories
Table length extension
For the secure
supporting of long
workpieces
With height
adjustable
support leg and
auxiliary fence rail
Eccentric clamp -
easy to mount
and dismount
Front/rear mounting
on the base support
system
HC 333: Mounting
possible on both sides
of the dressing plates
Length: 1.000 mm
Width: 200 mm
Mitre guide
For precise cross cuts
and angular cuts
Infinitely variable,
both sides adjustable,
90°-45°
Mitre guide
For precise cross cuts
and angular cuts
With workpiece bearing
made of aluminium
Infinitely variable, both sides
adjustable, 90°-45°
Roller stand RS 420
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling special steel rollers
with a high load capacity
Width: 400 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 G
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling chromium-plated
ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 W
For supporting long workpieces
when sawing, moulding/routing,
planing and drilling
Sturdy, height-adjustable and foldable
With smooth-rolling chromium-plated
ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material,
round or square workpieces
Width: 420 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Push block
For the lateral guiding
of the workpiece
Order no.
0910018469
Order no.
0910059963
0910008048
0910053353
0910053345
0910053361
0910057200
Chip and dust extraction units
Chip and dust extraction unit
For a cleaner work
environment and an
unobstructed view of the
workpiece you want to cut
For connecting to a chip
and dust extraction system
With this accessory,
the machine is dust-proof
Extraction nozzle Ø: 100 mm
Suitable for: PK 200
Chip and dust extraction unit
For a cleaner work
environment and an
unobstructed view of the
workpiece you want to cut
For connecting to a chip
and dust extraction system
With this accessory,
the machine is dust-proof
Extraction nozzle Ø: 100 mm
Suitable for: PK 250 until 1993,
PK 255
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
pitch
For PK 200
Tungsten
210 x 2,4 x 30 30 Alternately bevel-
carbide
Tungsten
210 x 2,4 x 30 42 Alternately bevel-
carbide
Tungsten
210 x 2,4 x 30 64 Alternately bevel-
carbide
Tungsten
210 x 2,4 x 30 40 Alternately bevel-
carbide
For PK 255
Tungsten
250 x 2,8 x 30 24 Alternately bevel-
carbide
Tungsten
250 x 2,8 x 30 34 Alternately bevel-
carbide
Tungsten
250 x 2,8 x 30 42 Alternately bevel-
carbide
Tungsten
250 x 2,8 x 30 60 Alternately bevel-
carbide
Tungsten
250 x 3,2 x 30 60 Alternately bevel-
carbide
Tungsten
250 x 2,8 x 30 80 Alternately bevel-
carbide
Tungsten
250 x 2,8 x 30 80 Flat tooth/
carbide
Order no.
0910017608
0910014374
Version Order no.
6.28036
ground tips
6.28039
ground tips
6.28081
ground tips
6.28037
ground tips, 3°
6.28012
ground tips
6.28045
ground tips,
Combo secondary
hole holder
6.28046
ground tips,
Combo secondary
hole holder
6.28049
ground tips,
Combo secondary
hole holder
6.28050
ground tips,
Combo secondary
hole holder
6.28087
ground tips,
Combo secondary
hole holder
6.28088
trapezoidal tooth,
5° negative
260 |
Page 15
PRECISION CIRCULAR SAWS
EQUIPMENT FEATURES
Demountable for large range of use
Powerful universal motor
Parallel guide/ripping fence with magnifier and Nonius
fine adjustment, double eccentric clamp
With table extension in length and width
for larger workpieces
Inclinable saw blade
Large and anodised aluminium table-top
Machine housing made of powder-coated,
torsion-resistant sheet steel
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
For three phase current
Accessories
Cabinet base
For ideal working height and secure base
Robust, powder-coated sheet
steel construction
Working height: 920 mm
Wheel set
For the easy transportation of the
machine mounted on the cabinet base
Order no.
0910050435
0910007262
SAWS
MACHINES
SPECIAL-PURPOSE
SYSTEMATIC
ORGANISATIONGARDEN
PK 300 - 4,2 DNB
Precision circular saw
PK 300 - 4.2 DNB
Comparative device characteristics
Dimensions L x W x H 1.480 x 1.430 x 1.050 mm
Table size 710 x 900 mm
Cutting height 90/45° 104 mm/70 mm
Rated load speed 3.800 /min
Cutting speed 50 m/s
Maximum cutting width
- With parallel guide/ripping fence 340 mm
Saw blade Ø 300 x 30 mm
Saw blade swivel range 0 - 45 °
Rated input power 4,2 kW
Output power 3 kW
Weight 90 kg
Standard equipment Carbide saw blade with
alternately bevel-ground tooth
(28 teeth), stand, parallel guide/
ripping fence with magnifier,
table length extension, table
length extension, chip and dust
extraction unit, chip extraction
connections, push stick
Type PK 300 - 4.2 DNB
Order no. 0103004217
0103003138
GB
230 V
Sliding table short
Enables exact cuts, even on
larger workpieces
Easy fastening of the sliding
table with snap locks
Guide profile made of thick-
walled aluminium and
galvanised round steels
Guided over four rollers
with ball bearings
Guide with mm division, extractable up to 2,600 mm
(telescope profile) with adjustable fence pointer
Cutting width 90°/45°: 610 mm/1.010 mm
Table size: 280 x 525 mm
Overall length: 1.500 mm
Base weight: 25 kg
Sliding table long
Enables exact cuts, even on
larger workpieces
Easy fastening of the sliding table
with snap locks
Guide profile made of thick-walled
aluminium and galvanised round
steels with height-adjustable
support leg
Guided over four rollers
with ball bearings
Guide with mm division, extractable up to 2,600 mm
(telescope profile) with adjustable fence pointer
Cutting width 90°/45°: 1.260 mm/1.660 mm
Table size: 280 x 525 mm
Overall length: 2.300 mm
Base weight: 35 kg
0910003291
0910003321
WOOD-PROCESSING
WATER-/PUMP
WELDING
COMPRESSED
TECHNOLOGY
TECHNOLOGY
TECHNOLOGY
AIR SYSTEMS
| 261
Page 16
PRECISION CIRCULAR SAWS
Table length extension
The table extension
increases the
supporting surface
(same width as
the work bench),
making it ideal for
cutting long pieces
of wood
Collapsible without
having to use tools
Length: 710 mm
Width: 570 mm
Table width extension
The table width
extension increases
the supporting
surface; ideal for
cutting boards
Enables cuts
on length guide
up to 1,010 mm width
Collapsible
without having
to use tools
Length: 900 mm
Width: 710 mm
Mitre guide
For precise cross
cuts and angular cuts
With workpiece
bearing made of
aluminium
Infinitely variable, both
sides adjustable, 90°-45°
PK 300: can be used
on the right and left
of the saw blade
Roller stands
For supporting long workpieces when sawing,
moulding/routing, planing and drilling
Sturdy, height-adjustable and foldable
Roller stand RS 420
With smooth-rolling
special steel rollers with
a high load capacity
Width: 400 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 G
With smooth-rolling
chromium-plated
ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Roller stand RS 420 W
With smooth-rolling
chromium-plated ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material,
round or square workpieces
Width: 420 mm
Base weight: 100 kg
Height: 640 - 1.015 mm
Order no.
0910003330
0910003305
0910008048
Order no.
0910053353
0910053345
0910053361
Push block
Push block
For the lateral guiding
of the workpiece
Spray for maintenance and care
Spray for maintenance and care
Ideal for maintenance
and care of wood processing
machines
Contains silicon, prevents
saw dust from sticking,
e.g. to threaded rods
or sliding bearings
Increases the sliding
quality of the workpieces
on the machine table
High cleaning capacity
Circular saw blades
Top cutting results thanks to teeth
ground on all sides and high accuracy
of flatness and concentric running
Tungsten carbide blades: long tool
life thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material DimensionsmmTooth
pitch
Tungsten
300 x 2,8 x 30 28 Alternately
carbide
Tungsten
300 x 2,8 x 30 48 Alternately
carbide
Tungsten
300 x 3,2 x 30 60 Roof hollow
carbide
Tungsten
300 x 2,8 x 30 72 Alternately
carbide
Tungsten
300 x 2,8 x 30 96 Alternately
carbide
Tungsten
300 x 2,8 x 30 96 Flat tooth/
carbide
Order no.
0910057200
Order no.
0911018691
Version Order no.
6.28014
bevel-ground
tips,
Combosecondary
hole holder
6.28051
bevel-ground
tips,
Combosecondary
hole holder
6.28052
tooth,
Combosecondary
hole holder
6.28053
bevel-ground
tips,
Combosecondary
hole holder
6.28089
bevel-ground
tips,
Combosecondary
hole holder
6.28090
trapezoidal
tooth,
Combosecondary
hole holder
262 |
Loading...