Mercedes-Benz S-Class, S 560 e Owner's Manual

É22258481104ËÍ

2225848110

Order no. P222 0200 13 Part no. 222 5848110 EditionA2019

S-Class

Plug-in hybrid Supplement

Mercedes-Benz

Publication details

Internet

Further information about Mercedes-Benzvehi‐ cles and about Daimler AG can be found on the following websites:

http://www.mbusa.com (USAonly)

http://www.mercedes-benz.ca (Canada only)

Editorial office

Daimler AG:Not to be reprinted, translated or otherwise reproduced, in whole or in part, with‐ out written permission from Daimler AG.

Vehiclemanufacturer

Daimler AG

Mercedesstrasse 137

70327Stuttgart

Germany

Symbols

In this Operator's Manual, youwill find thefol‐ lowing symbols:

DANGER Dangerdue to notobserving thewarning notices

Warning notices draw your attentiontohaz‐ ards that mayendanger your healthorlife, or thehealthorlifeofothers.

Please observe thewarning notices in this manual.

ENVIRONMENTAL NOTE Environmental damage due to failuretoobserve envi‐ ronmental notes

Environmental notesinclude information on environmentally responsible behavior or envi‐ ronmentally responsible disposal.

Observe environmentalnotes.

NOTE Damage to property due to failure to observe notesonmaterial damage

Notesonmaterialdamageinformyou of riskswhichmay lead to your ve hicle being damaged.

Observe notesonmaterial damage.

Useful instructions or further information that couldbehelpfulto you.

Instruction

(Q page)

Further information on atopic

Display

Information in themultifunction dis‐ play/multimedia display

Highestmenu level, whichistobe selected in themultimedia system

Corresponding submenus, whichare to be selected in themultimedia sys‐ tem

*Marks acause

As at 25.09.2017

Welcome to the world of Mercedes-Benz

Before you first drive off, read this Operator's Manual carefully and familiarize yourself with your vehicle. For your own safety and a longer vehicle life, follow the instructions and warning notices in this Operator's Manual. Disregarding them may lead to damage to the vehicle or per‐ sonal injury.

Vehicle damage resulting from the disregard of the instructions is not covered by the MercedesBenz Limited Warranty.

The equipment or model designation of your vehicle may vary according to:

Model

Order

National version

Availability

Mercedes-Benz reserves the right to introduce changes in the following areas:

Design

Equipment

Technical features

The equipment in your vehicle may therefore dif‐ fer from that shown in the descriptions and illus‐ trations.

The following are integral parts of the vehicle:

Digital Operator's Manual

Printed Operator's Manual

Maintenance Booklet

Equipment-dependent supplements

Keep these documents in the vehicle at all times. If you sell the vehicle, always pass all of the documents on to the new owner.

Mercedes-Benz USA, LLC

Mercedes-Benz Canada, Inc.

A Daimler Company

2225848110

General notes ............................................... 4

Operator's Manual .......................................... 4

Protecting the environment ............................4

Operating safety .............................................4

Qualified specialist workshop .........................5

Correct use of the vehicle ...............................5

Limited Warranty ............................................ 5

Notes on plug-in hybrid operation ...................6

Switching off the hybrid system manually ...... 7

Occupant safety ........................................... 9

Restraint system ............................................. 9

Climate control ........................................... 10

Overview of the control panel for auto‐

matic climate control .................................... 10

Pre-entry climate control via SmartKey ......... 11

Pre-entry climate control at time of

departure ...................................................... 12

Activating/deactivating immediate pre-

entry climate control .................................... 13

Operating modes ........................................ 15

Functions of the operating modes ................15

Switching operating mode ............................ 17

Multimedia system .................................... 18

Configuring settings for plug-in hybrid

vehicles ........................................................ 18

Functions of the energy flow display .............19

Showing the energy flow display ...................19

Displays and operation .............................. 20

Notes on the Instrument Display and on-

board computer ............................................ 20

DYNAMIC SELECT switch ............................. 20

Haptic accelerator pedal function ................. 22

Function of the power display of the

electric motor ............................................... 23

Function of the power meter ........................ 23

Displaying the power meter ..........................23

Function of the route-based operating-

mode strategy ..............................................23

Activating route-based operating-mode

strategy (ROS) ..............................................24

Charging the high-voltage battery ............ 25

Notes on high-voltage battery ......................25

Checking the charge level of the high-

voltage battery .............................................25

Function of the indicator lamp on the

vehicle socket ............................................... 25

Notes on charging the high-voltage bat‐

tery at the mains socket (mode 2) ................ 26

Overview of the charging cable control

panel, version 1 ............................................ 27

Setting the maximum permissible charg‐ ing current for charging at a mains

socket ........................................................... 29

Notes on charging the high-voltage bat‐

tery at a wallbox (mode 3) ............................ 30

Notes on charging the high-voltage bat‐

tery at a charging station (mode 3) .............. 30

Starting the charging process .......................31

Ending the charging process ........................ 33

Driving and parking ................................... 34

Driving .......................................................... 34

Refueling ...................................................... 35

Contents

Breakdown assistance ............................... 37

TIREFIT kit storage location .......................... 37

Starting assistance ....................................... 37

Permitted towing methods ............................37

Technical data ............................................ 39

Vehicle identification plate, VIN and

engine number overview ...............................39

Operating fluids ............................................ 40

Vehicle data .................................................. 41

Display messages and warning/indi‐

cator lamps ................................................ 43

Display messages .........................................43

Warning and indicator lamps .........................51

Index ........................................................... 53

Contents

Operator's Manual

This Supplement provides information on all the important functions of your hybrid vehicle that are either not described or differ from the descriptions in the vehicle Operator's Manual. This information supplements or replaces the corresponding sections in the vehicle Operator's Manual. Under no circumstances does the Sup‐ plement replace the Operator's Manual.

This Supplement describes all models, and standard and optional equipment for your vehi‐ cle, as available at the time of going to press. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here. This is also the case for systems and functions relevant to safety. Therefore, the equipment on your vehicle may differ from that in the descriptions and illustra‐ tions.

The original purchase contract documentation for your vehicle contains a list of all of the sys‐ tems in your vehicle.

Should you have any questions concerning equipment and operation, please consult an authorized Mercedes-Benz Center.

The Operator's Manual, the Supplement and the Maintenance Booklet are important documents and should be kept in the vehicle.

Protecting the environment

ENVIRONMENTAL NOTE Environmental pollution caused by irresponsible dis‐ posal of the high-voltage battery

A high-voltage battery contains materials which are harmful to the environment.

Dispose of defective high-voltage bat‐ teries at a qualified specialist work‐ shop.

Operating safety

Hybrid vehicles have a combustion engine and an electric motor. The energy supply for operat‐

ing the vehicle electrically is provided by the high-voltage on-board electrical system.

DANGER Risk of fatal injury by touching damaged high-voltage components

The vehicle's high-voltage on-board electrical system is under high voltage. If you modify component parts in the vehicle's high-volt‐ age on-board electrical system or touch dam‐ aged component parts, you may be electro‐ cuted.

The component parts in the vehicle's highvoltage on-board electrical system may be damaged in an accident, although the dam‐ age is not visible.

After an accident, do not touch any high-voltage components and never modify the vehicle's high-voltage onboard electrical system.

After an accident, have the vehicle transported away.

Have the high-voltage on-board electri‐ cal system checked at a qualified spe‐ cialist workshop.

General notes

The components of the high-voltage on-board electrical system are marked with yellow warn‐ ing stickers. The cables of the high-voltage onboard electrical system are orange.

Vehicles with an electric motor generate much less driving noise than vehicles with internal combustion engines. As a result, your vehicle may not be heard by other road users in certain situations. This can happen, for example, when you are parking and your vehicle is not seen by other road users. This requires you to adopt a particularly anticipatory driving style, as it is necessary to allow for the possibility that other road users may behave unpredictably.

Qualified specialist workshop

Always have the following work carried out on your vehicle at a qualified specialist workshop:

Work relevant to safety

Service and maintenance work

Repair work

Modifications as well as installations and conversions

Work on electronic components

Work on the hybrid system

Correct use of the vehicle

If you remove any warning stickers, you or others could fail to recognize certain dangers. Leave warning stickers in position.

When using the vehicle, observe the following information:

the safety notes in this manual

technical data for the vehicle

traffic rules and regulations

laws and safety standards pertaining to motor vehicles

Limited Warranty

NOTE Damage to the vehicle arising from violation of these operating instruc‐ tions.

Damage to the vehicle can arise from viola‐ tion of these operating instructions.

This damage is not covered either by the Mercedes-Benz implied warranty or by the New‑ or Used-Vehicle Warranty.

Follow the instructions in these operat‐ ing instructions on proper operation of your vehicle as well as on possible vehi‐ cle damage.

General notes

Notes on plug-in hybrid operation

WARNING Risk of chemical burns and poisoning from damaged high-voltage battery

If the housing of the high-voltage battery has been damaged, electrolyte and gases may leak out.

Avoid contact with the skin, eyes or clothing.

Immediately rinse electrolyte splashes off with water and seek medical atten‐ tion straight away.

DANGER Risk of explosion from exces‐ sive internal pressure of the high-voltage battery

In the event of a vehicle fire, the internal pressure of the high-voltage battery could exceed a critical value. In this case, flamma‐ ble gas escapes through a bleed valve in the vehicle's underbody.

The gas can ignite.

Leave the danger zone immediately.

Secure the danger zone at a suitable distance, whilst observing legal require‐ ments.

The hybrid system combines a combustion engine with an electric motor.

Characteristics when the vehicle is at a stand‐ still:

the combustion engine is generally switched off.

engine idling only occurs in certain instan‐ ces.

Characteristics when starting the vehicle:

if the high-voltage battery is sufficiently charged, the vehicle can be started with the electric drive without the combustion engine (noiseless start).

if the high-voltage battery is not sufficiently charged or the operating temperature of the combustion engine has not been reached, the vehicle can start with the combustion engine.

Characteristics with moderate power output requirements:

the combustion engine is switched off as often as possible during the journey.

the vehicle can be accelerated electrically up to speeds of approximately 87 mph (140 km/h).

Characteristics with high power output require‐ ments:

the electric motor supports the combustion engine (boost effect), e.g. when pulling away or accelerating.

the high-voltage battery is discharging.

Characteristics when releasing the accelerator pedal during the journey:

the electric motor is operated as a alternator when in overrun mode and during braking.

the high-voltage battery is charging.

Notes on electric driving:

vehicles with hybrid systems generate signifi‐ cantly less noise than vehicles with combus‐ tion engines.

General notes

when driving in electric mode the vehicle may not be heard by other road users due to the significantly less noise generated.

depending on the vehicle's equipment and national legislation, the vehicle may be equipped with Acoustic Vehicle Indication.

Information on Acoustic Vehicle Indication:

Acoustic Vehicle Indication generates a cer‐ tain sound at a speed between 0 and 19 mph (30 km/h).

this helps other road users, particularly pedestrians and bike riders, to hear your vehicle better.

above this speed, natural vehicle noise is suf‐ ficient for the vehicle to be heard in good time by other road users.

the sound can also be heard in the vehicle interior.

the volume depends on the engine speed, the speed and the accelerator pedal position.

Acoustic Vehicle Indication switches off at a speed of over 19 mph (30 km/h) because the natural vehicle noise is sufficient.

Switching off the hybrid system manually

DANGER Risk of fatal injury by touching damaged high-voltage components

The component parts in the vehicle's highvoltage on-board electrical system may be damaged in an accident, although the dam‐ age is not visible.

After an accident, do not touch any high-voltage components and never modify the vehicle's high-voltage onboard electrical system.

After an accident, have the vehicle transported away.

Have the high-voltage on-board electri‐ cal system checked at a qualified spe‐ cialist workshop.

Only deactivate the hybrid system manually in the following situations:

The 6 restraint system warning lamp lights up in the instrument cluster, e.g. after an accident.

The vehicle is badly damaged, e.g. after an accident, and the restraint system compo‐ nents were not activated.

General notes

Using the high-voltage disconnect device

Switch the ignition off.

Switch the transmission to position j.

Apply the electric parking brake.

Secure the vehicle against rolling away (see the vehicle Operator's Manual).

Open the trunk lid.

Lift the trunk floor upwards.

Remove the right-hand trim in the trunk.

Press release clip 1 in the direction of the arrow and pull it out.

Pull high-voltage disconnect device 2 in the direction of the arrow until it engages. The hybrid system is disconnected.

All work on the hybrid system (including after switching off manually) may only be carried out by a qualified specialist workshop.

General notes

Restraint system

Malfunctioning restraint system

A malfunction has occurred in the restraint sys‐ tem if:

The 6 restraint system warning lamp does not light up when the ignition is switched on.

The 6 restraint system warning lamp lights up continuously or repeatedly during a journey.

If the restraint system is malfunctioning, in the event of an accident the high-voltage on-board electrical system may not be deactivated as intended.

DANGER Risk of fatal injuries due to the restraint system malfunctioning

If the restraint system is malfunctioning, restraint system components may be trig‐ gered unintentionally or may not deploy as intended during an accident. This may affect the Emergency Tensioning Device or airbag,

for example. Furthermore, in the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended.

You may be electrocuted if you touch the damaged component parts of the high-volt‐ age on-board electrical system.

Have the restraint system checked and repaired immediately at a qualified spe‐ cialist workshop.

After an accident, switch off the ignition immediately.

Occupant safety

Overview of the control panel for automatic climate control

The indicator lamps in the buttons indicate that the corresponding function is activated.

Front control panel

Ã Sets climate control to automatic, left

w Sets the temperature, left

H Sets the airflow, left, or switches off climate control

g Switches air-recirculation mode on or off manually

¬ Defrosts the windshield

Calls up the air conditioning menu of

the multimedia system Switches the residual heat on or off

¤ Switches the rear window defroster on or off

& Activates or deactivates "Immediate pre-entry climate control" (→ page 13)

H Sets the airflow, right, or switches off climate control

w Sets the temperature, right

Ã Sets climate control to automatic, right

Rear passenger compartment control panel

Sets the temperature, left

Sets the air distribution, left

Sets climate control to automatic mode

Sets the airflow

Switches the climate control on/off Switches the residual heat on or off

Sets the air distribution, right

Sets the temperature, right

Climate control

Pre-entry climate control via SmartKey

Function of pre-entry climate control using the SmartKey

Before entering the vehicle, the driver's seat area or the whole vehicle interior can be briefly pre-warmed or pre-cooled.

When pre-cooling, the following functions are activated as needed:

Automatic climate control

Blower

When pre-heating, the following functions are activated as needed:

Automatic climate control

Blower

Seat heating

Mirror heater

Rear window defroster

Setting pre-entry climate control via Smart‐ Key

Multimedia system:

Vehicle.b Climate Control.Pre-

entry Climate Ctrl.

Activating or deactivating

Activate O or deactivate ª Via Key.

Selecting the zone

Select Select Zone.

Select Entire Vehicle or Driver's Seat Only.

Switching pre-entry climate on/off control using the SmartKey

Requirements:

The high-voltage battery is charged suffi‐ ciently.

The function has been activated via the mul‐ timedia system.

To switch on: unlock the vehicle. The climate control functions are activated for up to five minutes for pre-heating and pre-cooling.

Pre-entry climate control using the SmartKey cannot be activated more than twice when the vehicle is switched off.

To switch off: press the & button up or down.

The following functions remain active after the vehicle has been started:

Seat heating

Climate control

Pre-entry climate control at time of depar‐ ture

Pre-entry climate control at departure time function

WARNING Risk of fatal injury due to exposure to extreme heat or cold in the vehicle

If people – particularly children – are exposed to extreme temperatures over an extended period of time, there is a risk of serious or even fatal injury.

Never leave anyone – particularly chil‐ dren – unattended in the vehicle.

Never leave animals in the vehicle unat‐ tended.

The vehicle interior can be heated or ventilated when the vehicle is parked.

When the vehicle is connected to power supply equipment, priority is given to charging the highvoltage battery to a specified minimum charge.

The pre-entry climate control running time may be reduced under the following conditions:

The vehicle is not connected to power supply equipment

The high-voltage battery is not fully charged

With active pre-entry climate control, the charge level of the high-voltage battery may be reduced, even if the charging cable connector is connec‐ ted.

When cooling, the following functions are activa‐ ted as needed:

Automatic climate control

Blower

When heating, the following functions are activa‐ ted as needed:

Automatic climate control

Blower

Seat heating

Mirror heater

Rear window defroster

Setting pre-entry climate control at depar‐ ture time

Multimedia system:

Vehicle.b Climate Control.Pre-

entry Climate Ctrl.

Activating or deactivating pre-entry climate control at departure time

Select At Departure Time.

Activate O or deactivate ª the function.

Setting the departure time

Select Set Departure Time.

Set the desired time.

For further information about departure times, see (→ page 18).

Selecting the zone

Select Select Zone.

Select Entire Vehicle or Driver's Seat Only.

Climate control

Activating/deactivating pre-entry climate control at departure time

Requirements

The high-voltage battery is charged suffi‐ ciently.

The function has been activated via the mul‐ timedia system.

To activate: set the departure time (→ page 12). Pre-entry climate control at departure time is activated for a maximum of 55 minutes before the selected departure time. It remains active for another five minutes if the departure is delayed.

To deactivate: press the & button up or down.

The following functions remain active after the vehicle has been started:

Seat heating

Activating/deactivating immediate preentry climate control

WARNING Risk of fatal injury due to exposure to extreme heat or cold in the vehicle

If people – particularly children – are exposed to extreme temperatures over an extended period of time, there is a risk of serious or even fatal injury.

Never leave anyone – particularly chil‐ dren – unattended in the vehicle.

Never leave animals in the vehicle unat‐ tended.

The vehicle interior can continue to be cooled or heated for up to 50 minutes, e.g. if the journey is interrupted.

The indicator lamp colors have the following meaning:

blue: cooling activated

red: heating activated

yellow: departure time is preselected

Set the desired temperature using the w button.

Climate control

Press button 1. The red or blue indicator lamp on button 1 lights up or goes out.

Climate control

Functions of the operating modes

The operating mode determines the drive type of the plug-in hybrid vehicle.

The following operating modes are available:

HYBRID For economical driving with availability of all hybrid functions

Default setting when starting the vehicle.

All drive types (combustion engine, electric drive, boost and recuperation) are available.

The hybrid system selects the most suitable drive type according to the driving situation and road conditions.

E-MODEDriving by electric propulsion only

Driving by electric propulsion is possible up to the pressure point of the haptic accelerator pedal.

Beyond the pressure point of the haptic accelerator pedal, the combustion engine is activated.

Use: in inner city/low emission zone or when the charge level of the battery permits use of the electric drive.

Operating modes

E-SAVEThe charge level of the battery is maintained

Use of the electric drive and boost is restricted.

The charge level of the high-voltage battery is maintained, e.g. for subsequent use in the inner city/low emis‐ sion zone.

CHARGE The battery is charged by the combustion engine while driving

Only the combustion engine is available. The electric motor is operating as an alternator. Consumption increa‐ ses.

Use: if a high battery charge level is required for sections of the journey ahead.

In drive programs A and ; all operat‐ ing modes are available.

The HYBRID operating mode is active during manual gearshifting.

In the automatic drive program C the HYBRID operating mode is active.

System limitations

An operating mode may not be available under the following circumstances:

The high-voltage battery's charge level is too high or too low.

The combustion engine is not yet at operat‐ ing temperature.

The outside temperature is too high or too low.

The self-diagnosis functions are active.

Operating modes

Switching operating mode

Press button 1 repeatedly until the desired operating mode is selected.

Operating mode selected

Operating mode unavailable

Operating mode available

Operating modes

+ 43 hidden pages

Mercedes-Benz S-Class, S 560 e Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual