www.memmert.com | www.atmosafe.net
UN
PLUS
UF
PLUS
IN
PLUS
IF
PLUS
SN
PLUS
SF
PLUS
OPERATING
INSTRUCTIONS
100% ATMOSAFE. MADE IN GERMANY.
Willi Memmert Straße 90-96
When contacting customer service, always quote the product serial number on the nameplate
).
Willi-Memmert-Str. 90-96
We reserve the right to make changes
About this manual
About this manual
This manual describes the setup, function, transport, operation and maintenance of universal
/UF
/SF
and incubators IN
/IF
there is something you do not understand, or certain information is missing, ask your superior
Versions
The appliances are available in different configurations and sizes. If specific equipment fea-
tures or functions are available only for certain configurations, this is indicated at the relevant
The functions described in this manual refer to the latest firmware version.
from the actual appearance. Function and operation are identical.
AtmoCONTROL, observe the respective
This instruction manual belongs with the appliance and should always be stored where
whereabouts of this instruction manual. We recommend that it is always stored in a protected
You will find the current version of our operating manual as pdf file if you go to
www.memmert.com/de/service/downloads/bedienungsanleitung/.
..........................................................................
.............................................................................................................................
....................................................................................................................
.........................................................................................................................
..........................................................................................................................
.................................................................................................
......................................................................................................................
..................................................................................................
...............................................................................................................
................................................................
......................................................................................................................
............................................................................................................................
.......................
...................................................................................................................
........................................................................................................................
.............................................................................................................................
...............................................................................................................................
/SN
......................................................................................................................
........................................................
.................................................................................................
............................................................................................................
.............................................................................................................................
Safety regulations
Terms and signs used
you of possible dangers or to give you hints that are important in avoiding injury or damage.
Terms used
Warning signs (warning of a danger)
toppling
tions
Prohibition signs (forbidding an action)
Regulation signs (stipulating an action)
the mains
Wear
Wear safety
Other icons
Safety regulations
The appliances described in this manual are technically sophisticated, manufactured using
Warning!
After removing covers, live parts may be exposed. You may receive
the electrical equipment of the appliances.
Warning!
When loading the appliance with an unsuitable load, poisonous or
which do not form any toxic or explosive vapours when heated up
Warning!
Warning!
The appliance may only be operated and maintained by persons who are of legal age and
Safety regulations
The owner of the appliance
tions, and train staff accordingly;
work is carried out properly (see page 55);
through corresponding instructions and inspections;
This appliance is exclusively intended for heating up non-explosive substances and objects.
Any other use is improper, and may result in hazards and damage.
The appliance is not
which cannot form any toxic or explosive vapours at the set temperature and which cannot
The appliance may not be used for drying, vaporising and branding paints or similar materi-
the direct vicinity of the appliance.
Intended use as a
medical device
the laws of the Member States relating to medical devices), the intended use is defined as
follows:
type series: The appliance serves for heating non-sterile cloths
type series: The appliance serves for heating non-sterile cloths
type series: The appliance serves for temperature control of
type series: The appliance serves for sterilising medical material
through dry heated air at atmospheric pressure (also see page 54).
Safety regulations
validity and the appliance must no longer be operated.
The manufacturer is not liable for any damage, danger or injuries that result from unauthor-
The appliance may only be used in a flawless condition. If you as the operator notice irregu-
your superior.
You can find information on correcting malfunctions from page 36.
Warning!
the surfaces in the working
ter the appliance is switched
the handle bar until the
ventilating position (see
PLUS
ON
344.4
444 4.
TEMP
Set
°C
°C
FLAP
40%
TIMER
hd
1002
End Sept.29 22 24
FAN
%0
%
100
ALARM
max
444.4°C
auto
+
/
-
0.0K
min
444.4°C
ONN
Manu
44.Sept
Fig. 1
Switch off the appliance by pressing the On/
Construction
1
2
3
4 5 6
1
7
8
9
Fig. 2
Construction
keys (see page 25)
3
Steel grid
5
Nameplate (covered, see page 13)
Door handle (see page 23)
Nameplate (covered, see page 13)
Nameplate (covered, see page 13)
8
Construction and description
Appliances of the
and IN
type series feature natural
the UF
and IF
type series, air is circulated
flow and provides stronger
fan ventilated appliances,
working chamber, the pre-
the interior of the chamber.
The supply and exhaust air
through its high stability, optimal hygienic properties and corrosion-resistance towards many
The chamber load for the appliance must be carefully checked for chemical compatibility with
the materials mentioned. A material resistance table can be requested from the manufacturer.
Appliance fuse: Fusible link 250 V/15 A quick-blow
The temperature controller is protected with a miniature fuse 100 mA (160 mA at 115 V)
Fig. 3
Function
Fan
2
Fresh air
3
Pre-heating chamber
Air flap
Pre-heating chamber
Pre-heating chamber
5
Exhaust air
Air flap
Air flap
This appliance is intended for operation on an electrical power system with a system imped-
of a maximum of 0.292 ohm at the point of transfer (service line). The operator
of a maximum of 0.292 ohm at the point of transfer (service line). The operator
these requirements. If necessary, you can ask your local energy supply company what the
The interfaces are intended for appliances which meet the requirements of IEC 60950-1.
The appliance is fitted by default with a
transfer software stored on a USB stor-
to a USB storage medium (see page
transfer user ID data stored on a USB storage medium to the appliance (see page 53).
The USB interface is located on the lower right of the ControlCOCKPIT (Fig. 4 ).
Ethernet interface
Via Ethernet interface, the appliance can be
transfer programmes created with
Atmo-
You will find a description of how to transfer programmes via Ethernet in the en-
AtmoCONTROL manual.
With an optional USB to Ethernet converter, the appliance can be directly connected to a com-
Fig. 4
USB interface
Fig. 5
Ethernet interface
Construction and description
2.6 Designation ( nameplate)
The nameplate (Fig. 6) provides information about the appliance model
technical data. It is attached to the front of the appliance, on the right side behind the door
Typ: UN 260 plus F.-Nr.: 0109.0088
230 V
~
14.8 A 50/60 Hz 3400 W
DIN12880-Kl.3.1 Nenntemp.: 300 °C
1
2
3
4
5
6
10
8
9
7
Fig. 6
Nameplate (example)
3
Applied standard
Protection type
5
Address of manufacturer
Disposal note
8
Appliance number
Technical data
Appliance size 30 55 75 110 160 260 450 750
[mm]
[mm]
[mm]
[mm]
Construction and description
D
A
G
F
C
56
E
B
Fig. 7
Dimensions (see table on page 14)
Applied directives and standards
the member states on electromagnetic compatibility). Fulfilled standards:
tions of the member states on medical devices)
the member states on electromagnetic compatibility). Standards complied with:
You can download the EC declaration of conformity of the appliance online:
Ambient conditions
The appliance may only be used in enclosed rooms and under the following ambient
Ambient temperature
Altitude of installation
The appliance may not be used in areas where there is a risk of explosion. The ambient air
Scope of delivery
Tilt protection
AtmoCONTROL manual
The operating instructions at hand
Fig. 8
Converter USB to Ethernet
transport and
Warning!
yourself if you try to lift it. To
truck.
30 55 75 110 160 260 450 750
Warning!
You may get your hands or feet squashed when transport-
Warning!
The appliance could fall over and seriously injure you. Never
tilt the appliance and transport it in upright position and
without load only (except for standard accessories such as
The appliance is packed in cardboard and is delivered on a wooden palette.
Transport
The appliance can be transported in three ways:
With a
forklift truck; move the forks of the truck entirely under the pallet
To avoid damage, do not unpack the appliance until you reach the installation site.
transport damage
Loading...