GB |
Thank you for choosing |
|
|
|
a MELICONI remote control. |
Thanks to its large database and numerous functions, the Meliconi 5 in 1 remote control is ideal for replacing up to five remote controls of any brands for TV - VCR (Video Recorder) - DVDSAT - TER (Digital Terrestrial).
Keep this booklet in case you ever need to consult it in the future.
Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide, it is even easier and faster to programme the remote control
and discover all its potential.
USING THE KEYS AND FUNCTIONS
The functions described below are only available if they are already foreseen by your appliance.
1 - 2 - 3 - 4 - 5 - 6 7 - 8 - 9 - 0 - 1/--
Keys for selecting which appliance you want to use.
TV ON/OFF key
Number keys
Teletext keys
(INDEX key not present in the SMART model)
Keys that the user can customize to memorize and access additional commands (except the SMART model)
To select an external input terminal
MUTE key turns the volume on and off
To select the next (P+) or previous ( P-) channel or programme
Control the volume using +/–
To move around within the MENU or to control the BRIGHTNESS/COLOUR
Confirm key
Key with additional TV functions
To access the MENU
VCR/DVD function keys: RECORD - PAUSE - STOP - PLAY or fastext functions
FORWARD/REWIND functions for VCR and DVD
Specific area for SET TOP BOX
PREPARE FOR USE
Read these instructions carefully before programming your remote control!
6
FITTING THE BATTERIES
Before programming and using the remote control, fit the batteries.
The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:
•Change the batteries if the light indicator starts to flash during use. The batteries are low.
•Make a note of the codes for your appliances on the adhesive label inside the battery cover in case you have to reprogramme your remote control.
•This remote control has a permanent memory and does not lose the programmed codes or functions when the batteries are removed.
HOW TO PROGRAMME THE REMOTE CONTROL
The TV - VCR - DVD - SAT - TER keys can be programmed according to your requirements, following the procedure described below.
The quickest and easiest way to programme the remote control is by consulting enclosed CD or the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
1. Turn on the appliance to be programmed: - if a VCR, insert a cassette
- if a TV, SAT or TER select a programme - if a DVD insert a DVD.
2. Look for the brand of the appliance you want to programme |
PHILIPS |
0025 |
in the code list and make a note of the corresponding code alongside (e.g. PHILIPS 0025).
3. Hold down the selection key for the appliance to be programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the brand code previously identified (e.g. 0025). The selection key flashes more quickly to indicate that the remote control is ready for the search.
5. Point the remote control towards the appliance. Press and slowly release the ON/OFF key or PLAY for the VCR and DVD several times, stopping when the appliance responds correctly to the command.
6. When the appliance responds correctly, press the OK key to confirm. Three flashes indicate that the search operation has been completed correctly.
or |
or |
or |
or |
5 SEC. |
+ 
+ 
+
or
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly. If the commands function incorrectly or erratically, you have probably entered a code for a similar remote control but not the right one. In this case, repeat the search procedure starting from point 3, entering the code previously used (e.g. 0025).
To display and make a note of the code memorized by means of the search, follow the instructions described in the paragraph CURRENT CODE DISPLAY.
7
Loading...