K-86
K-86 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
K-86 SERIES
HOT WATER SANITIZING
MULTIPLE-TANK
RACK CONVEYOR
WAREWASHERS
Standard Features:
• ENERGY STAR Qualified
• Capacity 284 racks per hour
• Water consumption 0.37 gallons per rack
• All 304-series stainless steel construction
• Double-wall insulated construction on front, top and
back to improve operator safety, conserve heating energy,
and reduce noise and heat loss into the dishroom
• Large, easily-removed pan strainers with separate
prewash scrap basket
• Fully automatic operation including auto-fill and auto-
start. Prewash, wash, recirculating rinse and final rinse
are activated only when a rack is in place to conserve
water and detergent
• Powerful 3hp wash and recirculating rinse pumps are
vertically-mounted to be self-draining and easily
removed for servicing
• Electromechanical controls for reliability and easy operation.
Low-voltage 24VAC control circuit for operator safety
• Easily accessible detergent and rinse aid injection ports
for fast and easy chemical dispenser installation
• Single-point electrical, water and drain connections.
Internal booster heater option adds an additional
terminal block for simpler replacement of an existing
external booster heater
• Low-level heater protection
• Pressure reduction valve (machines with internal
booster heater)
Exclusive Features:
• Synchronized side-drive dual rack rail pawl-bar
system ensures complete water coverage from every
angle, even the bottom of the rack
• Large, insulated front doors are spring-loaded to
open easily and STAY open, without latching
• Computer-positioned wash arms in easily-removed
manifolds. Arms and manifolds are stainless steel,
eliminating high-wear gaskets and O-rings
• Concave, slotted nozzles minimize clogging. Nozzles
are computer-positioned at varying angles to maximize
water coverage over all areas of the ware
• Powerful 3hp pumps are 50% more powerful than
the industry standard for outstanding cleaning
• Large separation between wash and rinse (14” upper,
15” lower) avoids splashing of soiled water onto
sanitized ware
• Front-sloping tanks for complete drainage and easier
cleaning
• External, easily-operated lever drain system makes
draining fast, safe and simple
Models:
• K-86E: 18” vertical clearance, electric heat
• K-86S: 18” vertical clearance, steam coil heat
• K-86ET: 26” vertical clearance, electric heat
• K-86ST: 26” vertical clearance, steam coil heat
Options:
• Choice of two clearance heights (standard 18” or tall
hood 26”)
• Internal booster heater (steam or electric heat)
• External booster heater (steam or electric heat)
• Master disconnect
• External vent fan control
• Table limit switch
• Vent cowl collars
• Direct drive sideloader
• 90° powered loader or unloaders
• Flanged feet
• Drain water tempering kit
• Shock arrestor
• Pressure reduction valve (machines without internal
booster heater)
K-86 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
6-1/2"
(165mm)
Vent cowl
collar(s)
(optional)
4-3/4"
(121mm)
Control
panel
W
W
8-1/8”
(205mm)
Drain
handle
CR
CR
9-1/2”
(241mm)
S
S
1' 3-1/2”
(395mm)
Vertical
clearance
1
3
2
Wash
section
height,
doors
closed
Overall
height,
doors
open
Drain
handle
Electrical
connection
5
W
W
D
D
4
Overall
height,
doors
closed
CR
CR
S
S
H
1' 8-1/2" (520mm)
orizontal
clearance
Variable Dimensions
All dimensions from floor are +/- 1/2" due to adjustable feet.
1
Standard height
machines
Tall hood
machines
2' 2” (660mm)1' 6" (457mm)
2
5' 5-7/8" (1673mm)4' 9-7/8" (1471mm)
3
7' 11-7/8" (2435mm)6' 7-7/8" (2030mm)
4
6' 5-1/8" (2435mm)5' 9-1/8" (1756mm)
5
6' (1829mm)5' 4" (1626mm)
Utility Connection Symbols
Utility ratings and connection specifications on Page 6.
D W
Drain
Electrical
Ventilation
Water
Steam
Condensate return
S
CR
K-86 Series, left-to-right - electric heat w/o internal booster steam heat (all)OR
Table
lip-in
height
2' 10"
(864mm)
9-5/8"
(244mm)
D
7"
(178mm)
4"
(102mm)
Table-to-table 7' 2" (2184mm)
D
Vent cowl collar centerline 7’ 11-1/2” (2426mm)
8" (203mm)
W,S
7’ 8-1/2” (2350mm)
7-1/2"
(189mm)
1' 2-3/4"
(374mm)
2' 6-1/4"
(768mm)
1' 3-1/2"
(395mm)
1' 8-1/2"
(521mm)
Overall 8' 6" (2591mm)
1" (25mm)
5-1/2"
(140mm)
Direction
of travel
5"
(127mm)
3-1/2" (90mm)
recommended
11" (280mm)
1' 4"
(405mm)
CR
CR
3-1/8"
(80mm)
1' 10" (559mm) 5' 4" (1625mm)
1’ 11-1/8" (586mm)
K-86 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
Variable Dimensions
All dimensions from floor are +/- 1/2" due to adjustable feet.
1
Standard height
machines
Tall hood
machines
2' 2” (660mm)1' 6" (457mm)
2
5' 5-7/8" (1673mm)4' 9-7/8" (1471mm)
3
7' 11-7/8" (2435mm)6' 7-7/8" (2030mm)
4
6' 5-1/8" (2435mm)5' 9-1/8" (1756mm)
5
6' (1829mm)5' 4" (1626mm)
Utility Connection Symbols
Utility ratings and connection specifications on Page 6.
D W
Drain
Electrical
Ventilation
Water
Steam
Condensate return
S
CR
K-86 Series, right-to-left - electric heat w/o internal booster steam heat (all)OR
6-1/2"
(165mm)
Vent cowl
collar(s)
(optional)
4-3/4"
(121mm)
Control
panel
W
W
8-1/8”
(205mm)
Drain
handle
CR
CR
9-1/2”
(241mm)
S
S
1' 3-1/2”
(395mm)
Table
lip-in
height
2' 10"
(864mm)
9-5/8"
(244mm)
D
7"
(178mm)
4"
(102mm)
D
8" (203mm)
W,S
7’ 8-1/2” (2350mm)
7-1/2"
(189mm)
1' 2-3/4"
(374mm)
2' 6-1/4"
(768mm)
1' 3-1/2"
(395mm)
1' 8-1/2"
(521mm)
1" (25mm)
5-1/2"
(140mm)
Direction
of travel
5"
(127mm)
3-1/2" (90mm)
recommended
11" (280mm)
1' 4"
(405mm)
CR
CR
3-1/8"
(80mm)
3’ 5-3/8" (1051mm)
Table-to-table 7' 2" (2184mm)
Vent cowl collar centerline 7’ 11-1/2” (2426mm)
Overall 8' 6" (2591mm)
1' 10" (559mm)
5' 4" (1625mm)
H
1' 8-1/2" (520mm)
orizontal
clearance
Vertical
clearance
1
3
2
Wash
section
height,
doors
closed
Overall
height,
doors
open
D
D
Electrical
connection
5
4
Overall
height,
doors
closed
W
W
CR
CR
S
Drain
handle
Loading...