Meiko DV120.2 Manual

DV 120.2 • Updated 7-05 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX [phone] • www.meiko.us

DV 120.2

HOT WATER SANITIZING

VARIOTRONIC DOOR-TYPE

DISH MACHINE

Meiko’s DV 120.2 Variotronic door-type machine transforms from a dish-

washer to a pot-and-pan washer with the press of a single button. Its powerful

2 Hp wash pump is regulated by Meiko’s award-winning “Mike 2” control

system, creating variable-frequency drive and wash pressures. This gives

the end user the flexibility to accommodate various soil loads, from fine

glass stemware and china to heavily soiled pots, pans and utensils.

Other unique features include Meiko’s “Active Plus” wash tank soil removal

system, “Soft Start” fine china and glassware protection system, “Aqua-Stop”

water leakage protection system, and the “Auto Safe” temperature control

system. Together with the unit’s internal booster heater and power rinse

pump, “Auto Safe” provides constant, guaranteed temperature and pressure

for the wash and final rinse cycles, regardless of the incoming water

temperature and pressures.

As with all products synonymous with the name “Meiko,” engineering

excellence, manufacturing quality and performance come to the forefront in

the DV 120.2.

Special Features:

• Variotronic Operation - Preset cycles feature

different wash pressures and cycle times. This permits

thorough, outstanding cleaning of a variety of ware.

- Cycle 1: Fineware/stemware - 7 PSI, 34 racks/hr

- Cycle 2: Dishes & glassware - 10 PSI, 54 racks/hr

- Cycle 3: Pots, pans & utensils - 15 PSI, 20 racks/hr

• Mike 2 Programmable Controller - advanced micro-

computer technology for service diagnostics and end-

user dishmachine settings

• Built-in Booster Heater with Power Rinse Pump -

Guarantees constant pressure and temperature

during final rinse

• Double-wall construction keeps heat inside the

machine, reducing energy consumption and heat loss

into the dishroom environment

• Active Plus - Double filtration of wash water removes

food soil, improving washing efficiency and saving

detergent while easing cleaning chores

• Auto Safe - Guarantees minimum required wash and

rinse temperatures regardless of incoming water

temperature

• Soft Start Wash Pump - Protects dishes and glasses

from chipping or breaking

• Aqua-Stop - Automatically turns off incoming water

supply should internal water leakage occur

Standard Features:

• Three variable programmed time/pressure cycles

• Maximum rack capacity of 54 racks per hour

• Utilizes only 1.13 gallons of rinse water per rack

• Fully automatic operation - automatic fill, automatic

start, and automatic reset

• Pumped drain for both floor and wall drain applications

• Self cleaning cycle - automatic cleaning of the wash

chamber following machine shutdown

• Stainless steel non-clogging wash and rinse arms

• Sloped ceiling is safer for the user and prevents

dripping of soiled water onto sanitized ware

• Front mounted controls with digital cycle and

temperature displays

• Powerful 2 Hp wash pump

• All 304 and 316L stainless steel construction for

advanced corrosion resistance

• Type A air gap system eliminates need for vacuum

breaker

• Field-convertible for use in either straight-through or

corner applications

DV 120.2 • Updated 7-05 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX [phone] • www.meiko.us

If drain hose is

positioned as

a water trap,

topofloop

may be no

higher than

24" from floor

Electrical terminal block

Strain relief provided at lower

rear of machine. Adequate

slack in the wiring should be

provided to allow the machine

to be movedfor servicing.

Fresh water connection

3/4" male garden hose supply

connection is required.

Supplied hose extends 4' 7"

from machine connection.

Drain connection

Requires indirect connection to

1-1/2" drain pipe (wall or floor).

Supplied hose extends 4' 7"

from machine connection.

17 5/16" (440mm)

vertical clearance

9 3/16"

(233mm)

7 9/16"

(192mm)

12-9/16"

(319mm)

2 3/8" (60mm)

13" (330mm)

29 1/2" (750mm)

2 3/4" (70mm)

5 7/8" (150mm)

1 1/4"

(32mm)

1 1/4"

(32mm)

25" (635mm)

27-1/2" (699mm)

Plan View

Front Elevation Side Elevation

34" (845mm) table lip-in height

6 1/2" (165mm)

25 3/16" (640mm)

59 3/16" (805mm)

18 3/4" (476mm)

77 15/16" (1980mm)

7"

(178mm)

20" (508mm)

rack clearance

2 1/2"

(64mm)

12 1/2"

(318mm)

17"

(432mm)

12 1/2"

(317mm)

12 1/2"

(317mm)

20" (508mm)

rack clearance

2 1/2"

(64mm)

2 1/2"

(64mm)

Rack centerline

(corner installation)

Rack

centerline

Rack Clearances and Table Positioning

Dimensions Legend

11" (279mm)