We have structured these Operating Instructions for the installation so that you will
be able to look up the necessary subject-related information by means of the Contents List at any time.
Note
You will find comprehensive Operating Instructions for navigation on
the CD/DVD and at the online help of the device.
Read the section "Frequently Asked Questions" to obtain answers to questions that
are often addressed to our customer service.
Document Your Navigation Unit
It is important to document the details of your Navigation Unit purchase in the
event you need warranty service. The serial number can be found on the back of
the device:
Serial Number ......................................
Date of Purchase ......................................
Place of Purchase ......................................
Take the serial number from the type plate on the back or the underside of your
device. Also transfer the number into your guarantee documents, if necessary.
Quality
In selecting the components we have aimed for a high level of functionality, simple
handling, safety and reliability. A well-balanced hardware and software design
allows us to offer you a technologically advanced navigation system that will give
great satisfaction in both work and leisure use.
Service
Our individual customer care is there to support you when you have questions or
problems. Please get in touch – we look forward to helping you. This manual contains a special section on Customer Service starting on page 42.
Contents
Safety and Maintenance..........................................................................1
is a registered
trademark of Intel Corporation. The names of actual companies and products mentioned
herein may be the trademarks of their respective owners. Information in this document is
subject to change without notice
v
vi
Safety and Maintenance
Safety Instructions
Please read this section carefully and follow all the instructions given. This will help
ensure reliable operation and extend the service life for your appliance.
Keep the packaging and the user instructions for future reference or inquiries at a
later date. If you pass the article on to another person, you must pass on these
instructions.
• Never allow children to play with electrical equipment unsupervised.
• Keep the packing materials, such as foil away from children as there is a dan-
ger of suffocation.
• Never open up the housing of the appliance or the power adapter. These
contain no user-serviceable parts. If the housing is opened there is a danger
of electric shock.
• Do not place any objects on the appliance and do not exert any pressure on
the display. Otherwise there is a danger that the screen will break.
• To avoid damage, do not touch the screen with sharp objects. Use only the
stylus provided, a finger or another blunt implement.
• There is a risk of injury if the display breaks. If this should occur, use protec-
tive gloves to pack the broken parts and contact customer support to arrange for disposal. Then wash your hands with soap, since there is a possibility that chemicals may have escaped.
Remove the power adapter from the outlet, switch the appliance off immediately,
or do not switch it on, and contact Customer Service...
•if the housing of the appliance becomes damaged or fluids leak into it.
Components must be checked by Customer Service in order to avoid
damage!
Data Security
•Every time you update your data make backup copies on an external stor-
age medium. The supplier does not assume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from the loss of data or for consequential damages.
Safety and Maintenance
1
Operating Environment
Failure to follow these instructions may lead to damage to your appliance. The
guarantee will be excluded in such cases.
•Keep your navigation System and all connected devices away from mois-
ture and avoid dust, heat and direct sunlight, especially in the car.
•Make sure you protect your appliance from getting wet, e.g. from rain and
hail, at all times. Please pay attention that moisture can even build up in a
protective pouch because of condensation.
•Avoid heavy vibrations and shaking, such as can arise, for example, in the
case of transverse field intrusions.
•Install the device as vertically as possible to prevent the device from releas-
ing itself from its holder.
Repair
•Please contact our Service Center if you encounter technical problems with
your appliance.
•In the event repair becomes necessary, please use only our authorized Ser-
vice Partners. You will find the address on the back of your guarantee card.
Ambient temperature
•The appliance is most reliably operated at an ambient temperature of be-
tween 41°F and 104°F (5°C and 40°C) and at a relative humidity of between 10% and 90% (non-condensing).
•In the powered down state the appliance can be stored at between
32°F and 140°F (0°C and 60°C).
•Store the appliance in a safe location to avoid high temperatures (e.g.
when parking or from direct sunlight).
2
English
Electromagnetic Compatibility
•When connecting additional or other components the “Electromagnetic
Compatibility Directive” (EMC) must be adhered to. Please also note that
only screened cable (maximum 10ft) should be used with this appliance.
•For optimal performance, maintain a distance of at least 10 ft. from sources
of high-frequency and magnetic interference (televisions, loudspeaker systems, mobile telephones etc. This will help avoid malfunctions and loss of
data.
•Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other devices operated
in close proximity.
While our devices are tested and optimized for electromagnetic compliance
in our laboratories, interference during operation may still occur in the device itself and with other devices in its proximity.
Should such interference occur, try to eliminate it by adjusting the positions of and the distances between the devices.
Before driving a car, please ensure that the electronic systems of the car are
working properly.
Connection
When connecting your appliance be sure to correctly observe the following instructions:
Power supply through Car Adapter
•The car adapter should only be connected to the lighter socket of a car
(car battery = DC 12V
doubt about the power source in your car, contact your car manufacturer.
, truck battery = DC 24V !). If you are in any
Cabling
• Arrange cables so that no-one can tread on them or trip over them.
• Do not place any items on the cable.
Safety and Maintenance
3
Information about the Regulatory Compliance
according to R&TTE
The following radio equipment has been supplied with this device:
• Bluetooth
The company declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Complete declarations
of conformity are available under www.medion.com/conformity
0984
.
Battery Operation
Your appliance is operated with a removable battery. In order to prolong the life
and efficiency of your battery and to ensure safe operation, follow the instructions
below:
•Batteries cannot withstand heat. Avoid overheating of the appliance and
the integrated battery. Failure to comply with this instruction may lead to
damage to and even explosion of the battery.
• Use only the car adapter to charge the battery.
•
The batteries are special category waste. When disposing of the appliance ensure that this is done correctly. Contact Customer Service for more
details.
Maintenance
Warning
There are no user-serviceable or cleanable parts inside the housing of
the appliance.
You can prolong the life of the appliance by taking the following simple steps:
• Always remove the power plug and all connecting cables before cleaning.
• Clean the appliance only with a damp, lint-free cloth.
• Do not use solvents, caustic or gaseous cleaners.
• The device and its packaging are recyclable.
4
English
Care of the Display
•Avoid scratching the display surface as this is easily damaged. It is strongly
recommended to use a display protection mylar to avoid scratches. Please
ask your nearest dealer for this accessory.
The foil on the display at delivery is purely for protection during transportation!
•Ensure that no traces of water remain on the screen. Water can cause irreversible discoloration.
• Use only a soft, lint-free cloth to clean the screen.
• Do not expose the screen to either strong sunlight or ultraviolet radiation.
Recycling and Disposal
Device
At the end of its life, the appliance must not be disposed of in household rubbish.
Enquire about the options for environmentally-friendly disposal with your local
waste disposal company.
Packaging
To avoid damage during transport, the PC is stored in a packaging. Packaging is
produced mostly from materials which can be disposed of in an environmentally
friendly manner and be professionally recycled.
Safety and Maintenance
5
Transport
If you wish to transport the appliance follow the instructions
below:
•Following transport of the appliance wait until the unit has acclimatized
before using it.
•In the case of wide fluctuations in temperature or humidity condensation
or moisture may form inside the appliance and this can cause an electrical
short-circuit.
•In order to protect the appliance from dirt, knocks and scratching, use either the protective case.
•Before travelling ensure that you are aware of the power and communications provision at your destination. Before travelling obtain any power or
communications adapters that may be needed.
•When shipping your appliance use only the original packaging and advise
the carrier accordingly.
•When passing through the hand luggage control at airports, it is recommended that you pass the appliance and all magnetic storage media (external hard drives) through the X-ray system (the machine on which you
place your bags). Avoid the magnetic detector (the structure through
which you yourself pass) or the magnetic wand (the hand device that the
security staff use), since this may corrupt your data.
6
English
Supplied Items
Please check the integrity and completeness of the supplied items and, if it is not
complete, forward us any possible claims within 14 days from the purchase date.
The purchase package includes:
• Navigation system
• Power cable for cigarette lighter
• Car holder and cradle
• USB cable
• TMC dipole antenna
• Memory card MMC/SD
• CDs/DVDs with navigation software, digital maps, ActiveSync®,
PC application for restoring data quickly
•Instruction manual and warranty card
Safety and Maintenance
7
Views
Front Components
n
o p
Ref Component Description
Touch Screen Displays the output of your appliance. Tap on the
n
Bluetooth indicator Lights when the Bluetooth function is activated.
o
Battery charge
p
indicator
screen with your finger, a stylus or a "blunt" tip to select menu commands or enter data.
The loading display will flash orange during the charging process. It will shine green when the accumulator
is completely charged.
(similar picture)
8
English
Back Components
GPS
antenna
n
(similar picture)
Ref Component Description
Stylus Take the pen out of its compartment in order to use
n
External
o
aerial connection
Loudspeaker Plays back language statements and warnings.
p
it, and replace it after use. The pointer pen is required for operating the touch screen.
Connection for an optional second aerial.
o
p
Views
9
Bottom Components
Ref Component Description
Reset Opening Restarts your appliance. (Soft Reset, see page 17).
n
Earphone
o
connector
Mini-USB-
p
Connector
n op
Connects to a pair of stereo headphones (3.5 mm).
Using this appliance at full volume
for extended periods of time may
cause damage to the hearing capacity of the listener.
You also have the possibility to connect a TMC dipole
antenna here (see pages 48/49).
Connection for connecting to a PC by means of a USB
cable (for data matching) as well as connection to external power supply.
Top Components
n
(similar picture)
Ref Component Description
SD/MMC Slot
n
10
Accepts an optional SD (Secure Digital) or MMC (Mul-
tiMediaCard) card for removable storage.
English
Right Components
n
o
Ref Component Description
On-/Off switch
n
Hardware button Button to the main destination entry menu during
o
Switches the device on or off by pressing it briefly.
A long press will switch the device on or off.
navigation.
Views
11
Initial Set-up
The following guides you step by step through the initial Set-up of the navigation
system. Firstly, remove the foil from the display.
I. Charging the Battery
You have the following possibilities to charge the battery of your navigation system:
• by means of the car adapter or
• by means of the USB cable
Attention!
It can be necessary to recharge the battery for some time initially before it is possible to run through the initial installation, according to
the state of charging of the battery installed.
Please pay attention to the following notes when handling the battery:
•The charging status display flashes orange until the navigation system is
charged. If possible, do not interrupt the charging process before the
battery is fully charged. This may take a few hours. The navigation system
is fully charged if the charging display lights green.
•You can use the navigation system during the charging process, but the
power supply must not be interrupted during initial set-up.
•Leave the external power supply connected to the navigation system for
around 24 hours, so that the backup battery also charges-up fully.
•You can leave the external power supply connected, and this is very handy
for continuous operation. However, the the external power supply also requires power even when it is not charging up the battery of the navigation
system.
•It can take several minutes until the device is ready to operate again, following the connection of the external power supply, if the charging state
of the battery is very low.
•The battery can be charged while the device is switched off completely.
12
English
II. Power Supply
Car Adapter
o
n
(similar picture)
1. Plug the jack (n) of the connection cable into the corresponding receptor at
the bottom of your navigation system.
2. Insert the power adapter (o) into the cigarette lighter socket and ensure,
that it will not lose contact while driving. This could cause a malfunction.
Alternative possibility of charging the battery
The battery will charge as soon as you connect your navigation device to a
switched-on PC or notebook by means of a USB cable. No type of software or drivers installation will be necessary for this. Do not interrupt the charging process if
possible during the initial bringing into operation.
Initial Set-up
13
III. Switching on the Device
Press the on/off button for approx. 3 seconds until first information will appear
on the screen.
The Navigation System will start the initial installation automatically. The brand
logo will appear and your device will display the application screen after a few
seconds
*
*.
Button Description Main Screen
Navigation,
page 18
Picture Viewer,
page 33
AlarmClock,
page 36
MP3 Player,
page 29
Handssfree
and
facility, page 24
Settings
Changes the
view within the
main screen
Note
Brief pressure on the on/off button will be enough to switch the
device on or off, provided that your navigation system is connected
to an external source of electricity or is running in battery operation
(standby mode).
Your device is delivered in a state in which it will not switch off itself
automatically, when it is switched on and not being used. You can
adjust the operating time of your device to your requirements by
means of the Settings button on the main screen.
To switch your navigation system completely off, push the on/off
button at the bottom of the device to the OFF position.
No data will be lost during this because of the storage of data in the
internal memory. The starting process will only last slightly longer.
*
A slightly changed presentation can arise, according to the screen resolution.
14
English
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.