Congratulations on choosing to buy a Tevion® product. By doing so you now have
the assurance and peace of mind that comes with purchasing a product made by
one of Europe’s leading manufacturers.
All products brought to you by Tevion® are manufactured to the highest
standards of performance and safety, and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 3 Year Warranty.
Please fill in and return the Warranty Card to the address provided.
We hope you will enjoy using your purchase for many years to come.
1
Overview
LCD-TV
Front
1. TFT screen
2. Loudspeakers
3. On/off light with integrated infra-red sensor
On/off light: the blue light will come on when the device is in stand-by
mode. It will go off if the device is switched on.
Infra-red sensor: receiving area for infra-red signals from the remote
control.
Read these instructions carefully under all circumstance and follow all
the instructions listed. You will guarantee the reliable operation and a
long life expectancy of your LCD TV in this way. Always keep these
instructions at hand, close to your LCD TV. In the event that you
transfer ownership of this LCD TV, please provide these instructions to
the new owner.
Purpose of use
• This device serves to receive and transmit television channels. The
different connection possibilities will enable an additional expansion of
the sources of reception and transmission (Receiver, DVD-Player, DVDRecorder, Video Recorder etc.).
• This device is only suitable for using in dry, internal rooms.
• This device is not suitable as a data screen for office use.
• This device is intended for personal use only. It not intended for
commercial use in a heavy industry environment. Use under extreme
environmental conditions can result in damage to your device.
HD ready
Your LCD-TV is equipped with the 'HD ready' feature. This means that it can
display high resolution television programmes (HDTV) in principle.
It is the prerequisite that an HDTV signal is sent to the LCD TV by an external settop box (HD-STB).
3
Included in the box
Check that nothing is missing from the packaging and inform us of any missing
parts within 14 days after purchase. The delivery of the LCD-TV you have
purchased includes:
1. LCD-TV
2. Connection cable
3. Remote control incl. 2 batteries type R03 (AAA) 1,5V
• Do not allow children to play unattended on electrical equipment.
Children may not always correctly recognize danger.
• Keep the packing materials, such as foil away from children. The danger of
suffocation could arise in the case of misuse.
• Never open the housing of the TFT display (electric shock, short-circuit and
the danger of fire)!
• Do not insert any objects through the slots and openings into the inside of
the TFT (electrical shock, short-circuit and the danger of fire)!
• The remote control has a class 1m infrared diode. Do not examine the LED
with optical instruments!
• Slots and openings in the TFT display are for ventilation purpose. Do not
cover these openings, as otherwise this may lead to overheating
(overheating, danger of fire)!
• Never exert pressure on the display. This could damage the display.
• An injury hazard exists when the display breaks. Wear protective gloves to
pack the broken parts and send them into your service center for proper
disposal. Then wash your hands with soap, because it is possible for
chemicals to escape.
• Do not touch the display with your fingers or with sharp objects to avoid
damage.
• Please proceed as outlined in the service center section:
– if the AC cable overheats or is damaged
– if liquid has gotten into the display
– if the device does not work properly
– if the device is dropped or the housing damaged
4
Point of use
• In the first hours of operation, new devices may emit a typical, unavoidable
but completely harmless smell, which will decline increasingly in the
course of time.
• We recommend you to ventilate the room regularly, in order to counteract
• Leave all repairs of your LCD TV to authorized and qualified personnel only.
• Should a repair be necessary, please contact one of our authorized service
center.
Intended Environment
• The device can be operated at an ambient temperature of between 5° C to
35° C and at a relative humidity between 20% and 85% (without
condensation).
• When switched off, the LCD-TV can be stored most reliably between -20° C
- +60° C).
• Provide an interval of at least one meter from high-frequency and
magnetic sources of interference (television sets, loudspeakers, mobile
telephones, etc.) in order to avoid malfunctions.
• After transporting your LCD TV please wait until it has assumed the
ambient temperature before connecting and switching it on.
• Large variations in temperature and humidity can cause condensation to
occur inside the LCD-TV, which may cause an electrical short circuit.
• Disconnect the power plug from the power socket and the aerial from the
aerial connection during storms or if the device is not being used for a long
time.
Power Supply
Please pay attention: Parts of the device are still live, even if the
mains switch is switched off. Pull the mains plug out of the
socket, to interrupt the power supply to your LCD TV completely.
• Operate your TFT display mains (power supply) only on grounded sockets
with 230 V ~ 50 Hz. If you have doubts about the power supply in the
location where the LCD-TV is installed, consult your energy supplier.
• For additional safety we recommend use of an excessive voltage
protection device to protect your LCD TV from damage resulting from
voltage surges or lightning.
• The power socket must be in the vicinity of your LCD TV and within reach
• If you use an extension cable, please ensure that it complies with the VDE
requirements. If necessary consult your electrical equipment supplier.
• You should lay the TFT Display cables in a manner that no one can trip or
step on it.
• To avoid damage of cable do not place any objects or furniture on the
cable.
Standards/electro-magnetic compatibility
Your display fulfils the requirements for electro-magnetic compatibility and
electrical safety specified in the following standards:
Standards/electro-magnetic compatibility
EN 55013 Limit values and measuring methods for radio interference
by radios and television receivers and accessories
EN 55020 Electromagnetic immunity of broadcast receivers and
associated equipment
EN 60065 Audio, video and similar electronic apparatus—Safety
requirements
EN 61000-3-2 Electromagnetic compatibility (EMC)—Part 3-2:Limits—
Limits for harmonic current emissions (equipment input
current up to and including
16 A per phase)
EN 61000-3-3 Electromagnetic compatibility (EMC)—Part 3-3:Limits—
Limitation of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems, for
equipment with rated current <= 16 A per phase and not
subject to conditional connection
Batteries and Proper Treatment
Batteries may contain combustible materials. By misuse, this may cause battery
leakage, heat, explosion or ignition, bringing about injury or damage to the
device.
• Keep children away from batteries. If by any chance, the batteries are
swallowed, consult a doctor immediately.
• Do not charge batteries (except rechargeable batteries).
• Do not forcibly discharge batteries.
• Do not short-circuit batteries.
• Do not heat or dispose off in fire. .
• Do not disassemble or deform batteries. Your hands and fingers may be
injured, or the liquid of the battery may get into your eyes or adhere to
your skin. If this happens, rinse with a large quantity of water immediately
and consult a doctor.
• Do not expose batteries to strong impact by dropping or throwing the
batteries.
• Do not reverse the positive (+) and negative (-) terminals to avoid short-
circuit.
• Do not mix used and new or different types of batteries together.
• Remove promptly the used batteries from the device.
• Remove the batteries from your device if it is not to be used for a longer
period.
• Clean the battery and device contacts, if necessary, before inserting
batteries.
• Replace all batteries with new batteries of the same type at the same time.
Connect the aerial
connection and the LCDTV by means of a double
screened aerial cable (not
supplied) when
connecting the device to
the room aerial or cable
system.
Connecting the power supply
Insert the plug on the supplied power cable into the connecting bush (1)
(220-240 V ~ 50 Hz) on the device and insert the other end into an easily
accessible 230 V ~ 50 Hz power socket.
Turning the LCD TV on and off
1. Press the on/off switch (2) on the back of the device. The stand-by mode
will be activated and a blue light on the front will come on.
2. You can switch on the device by pressing a
control or a
device itself. The light on the front will go out.
3. You can put the device back into stand-by mode with the stand-by key on
the remote control or with the stand-by key on the right side of the device.
4. Press the on/off switch on the back of the device again to switch the
channel selection key on the remote control or on the
digit key
on the remote
17
First Time Installation
The IDTV Menu will appear when you switch your device on for the first time. You
will be greeted in different languages and requested to select the language of the
IDTV Menu.
You will be able to move upwards or downwards in the Menu by means of
the
directional buttons. Press the
You will receive information about using the IDTV Menu in the Help Menu; press
the
INFO
button to call up the Help Menu. You will leave the Help Menu by
pressing the
INFO
button again.
OK
button to confirm your selection.
6
Searching for digital channels
The initial installation will start after you have confirmed the language with OK.
Select the country required with the _` directional buttons and press OK. The
digital transmitter, the query concerning the automatic search process of the
transmitter, will appear.
Click on Yes with the _` directional buttons and press OK to start the digital
search process of the transmitter.
Click on No with the
IDTV will search through the UHF channels 21 to 68 and for terrestrial digital TV
channels automatically.
The names of the channels found will be displayed. This process will last about
five minutes. You will be able to press the
search. The following Menu will be displayed during the automatic search
process of the transmitter:
You will be requested to start the search for analogue channels after the
conclusion of the digital search process of the transmitter.
Click on No with the _` directional buttons and press OK to stop the process.
M
button at any time, to stop the
Click on Yes with the
analogue search process of the transmitter.
The TV device will switch to the analogue TV mode.
country setting, set the required
country with the
key. The country setting has an
effect on the sequence in which
channels are stored.
• Then select if necessary the Language message with the directional key
directional
and choose the required language with the directional keys.
• If you wish to change the pre-set for the video text language, use the
directional key to select the message TXT Language (Language for
teletext) and use the
region Westen, Ost (East), Turk/Gre (Turkish/Greek), Kyrillisch
or Arabisch.
• Then confirm the message "CHECK ANTENNA CABLE" by pressing the
OK
key or pressing the red key.
• You can cancel this process by pressing the blue key.
directional keys to select the required language
Automatic channel seeking
Automatic channel seeking will now
commence. This takes a few minutes.
You can cancel this process with the
key
.
The channels are stored in a countryspecific sequence in the channel locations. It is possible to store a maximum of
100 channels.
After automatic storage of channels is complete, the programme table will be
displayed. If this table is not modified further, it will close after a few minutes. The
channel on channel location 1 will appear.
You will be able to switch between terrestrial digital reception and analogue
reception at any time, while a television programme is being displayed, with the
TV/DTV button.
Having information displayed
The information box will inform you about the channel selected and the
programme showing. The name of the channel will be displayed together with
the list number of the channel; the strength of the signal will also be shown. The
programme currently showing and the next programme beginning will be
displayed, together with their starting and finishing times.
• Press the
will be faded out if you press the
• You will obtain the same information when switching to a different
programme.
Programme data will not be transmitted by all channels. ‘No data
available’ will be displayed in the information box if the names and times
of the programmes are not transmitted.
INFO
button, to have the information box displayed. The box
INFO
button again.
Channel Search
• You can select a channel by pressing the P key on the remote control (or
P/CH
on the device) or by selecting the channel directly using a digit key.
-/--
• For a number with two digits first press the
• You can select the most recent displayed channel with the